Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 25N2​ = 72

A 3 kW motor running at 1440 rpm drives a pinion with 25 teeth, which meshes with a gear with 72 teeth. The gear pair has an efficiency of 95%. Find the output torque T2 on the gear shaft.

P = 3 kWn1 = 1440 rpmN1 = 25N2 = 72η = 95%
T2 = N·m
2.Gears & gear trainsHard
A = 12B = 30C = 40D = 48

In a compound gear train, gear A (12 teeth) on the input shaft turning at 1500 rpm drives gear B (30 teeth). Gear C (40 teeth) is fixed to the same shaft as B and drives gear D (48 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 12B = 30C = 40D = 48
nout = rpm
3.Torsion of shaftsMedium
do​ = 80, di​ = 48 mmT = 400 N·mL = 2 m

A hollow brass shaft (outer diameter 80 mm, inner diameter 48 mm, length 2 m) is fixed at one end and twisted by a torque of 400 N·m at the other. Find the angle of twist φ in degrees.

T = 400 N·mdo = 80 mmdi = 48 mmL = 2 mG = 39 GPa
φ = °
4.Torsion of shaftsHard
d = ?75 kW, 1450 rpm

A solid brass shaft transmits 75 kW at 1450 rpm. The shear stress must not exceed 60 MPa and the twist must not exceed 0.75° per m of length. Find the smallest diameter d that satisfies both limits.

P = 75 kWN = 1450 rpmτallow = 60 MPaθallow = 0.75°/mG = 39 GPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 140σy​ = −60τxy​ = 40MPa

A point in a loaded part has σₓ = 140 MPa, σᵧ = −60 MPa and τₓᵧ = 40 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 140 MPaσy = −60 MPaτxy = 40 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
50°D = 1500 mm, t = 6 mm, p = 0.8 MPap

A thin-walled cylindrical tank of inner diameter 1500 mm and wall thickness 6 mm holds gas at a gauge pressure of 0.8 MPa. It is made from plate welded along a helical seam at 50° to the axis of the cylinder. Find the normal stress σn acting across the weld seam.

D = 1500 mmt = 6 mmp = 0.8 MPaα = 50°
σn = MPa
7.Axial stress & strainMedium
P = ?12400 mm200 mmØ30Ø30δ = 0.5 mm

A bar is made of a steel segment (diameter 30 mm, length 400 mm, E = 200 GPa) joined end to end with a segment made of bronze (diameter 30 mm, length 200 mm, E = 110 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.5 mm in total.

segment 1: steel, Ø30 mm, 400 mm, E = 200 GPasegment 2: bronze, Ø30 mm, 200 mm, E = 110 GPaδ = 0.5 mm
P = kN
8.Axial stress & strainHard
80 kN12600 mm300 mmØ20Ø60σ2​ = ?

A steel segment (diameter 20 mm, length 600 mm, E = 200 GPa) and a segment made of aluminium (diameter 60 mm, length 300 mm, E = 70 GPa) are joined end to end and fixed between two rigid walls. An axial load of 80 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø20 mm, 600 mm, E = 200 GPasegment 2: aluminium, Ø60 mm, 300 mm, E = 70 GPaP = 80 kN
σ2 = MPa
9.Column bucklingMedium
PL = 3 md = 20 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 3 mE = 200 GPa (steel)d = 20 mm
Pcr = kN
10.Column bucklingHard
PL = 1.5 md = 20 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 1.5 mE = 200 GPa (steel)d = 20 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 20 kN/mζ = 0.45m = 25 kg

A 25 kg mass on a spring with a stiffness of 20 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 25 kgk = 20 kN/mζ = 0.45
fd = Hz
12.Mechanical vibrationsHard
k1​ = 100k2​ = 5k3​ = 10m = 50 kg

A 50 kg mass hangs from spring k₃ = 10 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 100 kN/m and k₂ = 5 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 100 kN/mk2 = 5 kN/mk3 = 10 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T2 = 54.43 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1440/60 = 150.8 rad/s
T1 = P/ω₁ = 3000/150.8 = 19.89 N·m

Output torque

T2 = 19.89·72/25·0.95 = 54.43 N·m

Answer

T2 = 54.43 N·m
2.Gears & gear trains

Answer: nout = 500 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·12/30 = 600 rpm = nC

Second stage

nout = 600·40/48 = 500 rpm

Answer

nout = 500 rpm

total ratio = 3 : 1

3.Torsion of shafts

Answer: φ = 0.3358 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π(80⁴ − 48⁴)/32 = 3.5 × 10⁶ mm⁴

Angle of twist

T = 400 N·m = 400000 N·mm
L = 2 m = 2000 mm
G = 39 GPa = 39000 MPa
φ = TL/(GJ) = 400000·2000/(39000·3.5 × 10⁶) = 0.005861 rad
φ = 0.005861·180/π = 0.3358°

Answer

φ = 0.3358°
4.Torsion of shafts

Answer: d = 56.03 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·1450/60 = 151.8 rad/s
T = P/ω = 75000/151.8 = 493.9 N·m

Diameter for strength

T = 493.9 N·m = 493929 N·mm
dτ = ∛(16·493929/(π·60)) = 34.74 mm

Diameter for stiffness

θ = 0.75·π/180/1000 = 1.309 × 10⁻⁵ rad/mm
G = 39 GPa = 39000 MPa
dφ = (32·493929/(π·39000·1.309 × 10⁻⁵))1/4 = 56.03 mm

Governing diameter

Both limits must hold, so the larger diameter governs.

d = max(34.74, 56.03) = 56.03 mm

Answer

d = 56.03 mm

Here stiffness governs.

5.Mohr’s circle & stress transformation

Answer: τmax = 107.7 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((140 − −60)/2)² + 40²) = 107.7 MPa

Answer

τmax = 107.7 MPa
6.Mohr’s circle & stress transformation

Answer: σn = 70.66 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Thin-walled cylinder: hoop stress σh = pr/t and axial stress σa = pr/(2t); these are the principal stresses in the wall.

Wall stresses

r = 1500/2 = 750 mm
σh = pr/t = 0.8·750/6 = 100 MPa
σa = pr/(2t) = 50 MPa

Transform to the seam

Take x along the axis (σa) and y around the hoop (σh). The seam’s normal makes 90° − α with the axis.

σn = 50·sin²50° + 100·cos²50° = 70.66 MPa

Answer

σn = 70.66 MPa
7.Axial stress & strain

Answer: P = 92.56 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 706.9 mm², A₂ = 706.9 mm²

Flexibilities

L₁/(E₁A₁) = 400/(200000·706.9) = 2.829 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 200/(110000·706.9) = 2.572 × 10⁻⁶ mm/N

Load

P = 0.5/5.402 × 10⁻⁶ = 92565 N = 92.56 kN

Answer

P = 92.56 kN
8.Axial stress & strain

Answer: σ2 = 24.42 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·314.2/600 = 104720 N/mm
k₂ = 70000·2827/300 = 659734 N/mm

Share of segment 2

F2 = 80000·659734/764454 = 69041 N

Stress

σ2 = 69041/2827 = 24.42 MPa (compression)

Answer

σ2 = 24.42 MPa
9.Column buckling

Answer: Pcr = 3.515 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·20⁴/64 = 7854 mm⁴

Effective length

KL = 0.7·3000 = 2100 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·7854/2100² = 3515 N = 3.515 kN

Answer

Pcr = 3.515 kN
10.Column buckling

Answer: σcr = 44.76 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·20⁴/64 = 7854 mm⁴

Radius of gyration and slenderness

A = 314.2 mm²
r = √(I/A) = √(7854/314.2) = 5 mm
KL = 0.7·1500 = 1050 mm
KL/r = 1050/5 = 210

Critical stress

σcr = π²E/(KL/r)² = π²·200000/210² = 44.76 MPa

Answer

σcr = 44.76 MPa
11.Mechanical vibrations

Answer: fd = 4.02 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(20000/25) = 28.28 rad/s
fn = 28.28/(2π) = 4.502 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 4.502·√(1 − 0.45²) = 4.02 Hz

Answer

fd = 4.02 Hz
12.Mechanical vibrations

Answer: fn = 2.151 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 100 + 5 = 105 kN/m
keq = 105·10/(105 + 10) = 9.13 kN/m

Natural frequency

ωn = √(9130/50) = 13.51 rad/s
fn = 13.51/(2π) = 2.151 Hz

Answer

fn = 2.151 Hz

ExamProblems · examproblems.com/courses/machine-design