Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 20N2​ = 32

A 1.1 kW motor running at 960 rpm drives a pinion with 20 teeth, which meshes with a gear with 32 teeth. Ignore losses. Find the output torque T2 on the gear shaft.

P = 1.1 kWn1 = 960 rpmN1 = 20N2 = 32η = 100%
T2 = N·m
2.Gears & gear trainsHard
Ns​ = 16nr​ = ?Np​ = 18carrier fixed

In a planetary gear set the sun gear has 16 teeth and each planet gear has 18 teeth. The planet carrier is held fixed and the sun is driven at 1800 rpm. Find the speed nr of the ring gear (magnitude).

Ns = 16Np = 18ns = 1800 rpm
nr = rpm
3.Torsion of shaftsMedium
d = 12 mmT = 50 N·m200 mmφ = 10.82°

In a torsion test, a solid specimen of diameter 12 mm is twisted by a torque of 50 N·m. The two ends of a gauge length of 200 mm rotate 10.82° relative to each other (the material is still elastic). Find the shear modulus G of the material.

T = 50 N·md = 12 mmL = 200 mmφ = 10.82°
G = GPa
4.Torsion of shaftsHard
Tdo​ = 60 mm, di​ = 48 mm

A hollow shaft transmits 10 kW at 500 rpm. Find the maximum shear stress τmax in the shaft.

P = 10 kWN = 500 rpmdo = 60 mmdi = 48 mm
τmax = MPa
5.Mohr’s circle & stress transformationMedium
σx​ = −50σy​ = 110τxy​ = −20MPa

A point in a thin plate is in plane stress: σₓ = −50 MPa, σᵧ = 110 MPa and τₓᵧ = −20 MPa, with σz = 0. Find the absolute maximum shear stress τabs at the point (considering all planes in three dimensions).

σx = −50 MPaσy = 110 MPaτxy = −20 MPaσz = 0
τabs = MPa
6.Mohr’s circle & stress transformationHard
40°D = 1500 mm, t = 15 mm, p = 0.5 MPap

A thin-walled cylindrical tank of inner diameter 1500 mm and wall thickness 15 mm holds gas at a gauge pressure of 0.5 MPa. It is made from plate welded along a helical seam at 40° to the axis of the cylinder. Find the normal stress σn acting across the weld seam.

D = 1500 mmt = 15 mmp = 0.5 MPaα = 40°
σn = MPa
7.Axial stress & strainMedium
80 kNØ30100 GPaØ100/60500 mmδ = ?

A steel rod (diameter 30 mm, E = 200 GPa) sits inside a tube made of brass (outer diameter 100 mm, inner diameter 60 mm, E = 100 GPa). Both are 500 mm long and are compressed together between rigid plates by 80 kN. Find the shortening δ.

P = 80 kNrod: Ø30 mm, E = 200 GPatube: Ø100/Ø60 mm, E = 100 GPaL = 500 mm
δ = mm
8.Axial stress & strainHard
Ø 40 mmBrass1.5 mØ 16 mmSteel0.5 mP = 35 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 35 kNsegment 1: Ø40 mm, 1.5 m, brass (E = 100 GPa)segment 2: Ø16 mm, 0.5 m, steel (E = 200 GPa)
δ = mm
9.Column bucklingMedium
PL = 5 m30 × 50 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 5 mE = 70 GPa (aluminium)b × h = 30 × 50 mm
Pcr = kN
10.Column bucklingHard
PL = 2.5 md = 60 mmcross-section

A column of length L made of aluminium is fixed at the base and free at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 2.5 mE = 70 GPa (aluminium)d = 60 mm
σcr = MPa
11.Mechanical vibrationsMedium
k = 200 kN/mc = 630 N·s/mm = 8 kg

An 8 kg mass is supported by a spring with a stiffness of 200 kN/m and a viscous damper with a damping coefficient of 630 N·s/m. Find the damping ratio ζ.

m = 8 kgk = 200 kN/mc = 630 N·s/m
ζ =
12.Mechanical vibrationsHard
k1​ = 20k2​ = 25m = 50 kg

A 50 kg mass hangs from two springs side by side (in parallel), with stiffnesses k₁ = 20 kN/m and k₂ = 25 kN/m. The mass stays level. Find the equivalent stiffness keq of the spring system in kN/m.

m = 50 kgk1 = 20 kN/mk2 = 25 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: T2 = 17.51 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·960/60 = 100.5 rad/s
T1 = P/ω₁ = 1100/100.5 = 10.94 N·m

Output torque

T2 = 10.94·32/20·1 = 17.51 N·m

Answer

T2 = 17.51 N·m
2.Gears & gear trains

Answer: nr = 553.8 rpm

Planetary gear sets: the speeds of sun, ring and carrier are linked by the Willis equation (ns − nc)/(nr − nc) = −Nr/Ns: seen from the carrier, the set is an ordinary train with the planets as idlers. Holding one member fixed turns the set into a single-ratio reducer.

Ring gear teeth

Nr = Ns + 2·Np = 16 + 2·18 = 52

Willis equation with the carrier fixed

With nc = 0 the sun drives the ring through the planets, which act as idlers.

nr = −ns·Ns/Nr = −1800·16/52 = −553.8 rpm
|nr| = 553.8 rpm

Answer

nr = 553.8 rpm

The ring turns opposite to the sun.

3.Torsion of shafts

Answer: G = 26.01 GPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar moment and angle

J = π·12⁴/32 = 2036 mm⁴
φ = 10.82·π/180 = 0.1888 rad

Shear modulus

T = 50 N·m = 50000 N·mm
G = TL/(Jφ) = 50000·200/(2036·0.1888) = 26012 MPa
G = 26.01 GPa

Answer

G = 26.01 GPa

Compare: steel ≈ 80 GPa, brass ≈ 39 GPa, aluminium ≈ 26 GPa.

4.Torsion of shafts

Answer: τmax = 7.627 MPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·500/60 = 52.36 rad/s
T = P/ω = 10000/52.36 = 191 N·m

Polar second moment of area

J = π(60⁴ − 48⁴)/32 = 751193 mm⁴

Maximum shear stress

τmax = T·(do/2)/J = 190986·30/751193 = 7.627 MPa

Answer

τmax = 7.627 MPa
5.Mohr’s circle & stress transformation

Answer: τabs = 82.46 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. In three dimensions the absolute maximum shear stress is (σmax − σmin)/2 over all three principal stresses; in plane stress the third one is zero.

στxyCσ1​σ2​

In-plane principal stresses

C = 30 MPa, R = √((−80)² + (−20)²) = 82.46 MPa
σ1 = 112.5 MPa, σ2 = −52.46 MPa, σz = 0

Largest of the three circles

τ = max(|σ1 − σ2|, |σ1|, |σ2|)/2 = max(164.9, 112.5, 52.46)/2 = 82.46 MPa

Answer

τabs = 82.46 MPa

Here σ₁ and σ₂ have opposite signs, so the in-plane maximum R is also the absolute maximum.

6.Mohr’s circle & stress transformation

Answer: σn = 19.84 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Thin-walled cylinder: hoop stress σh = pr/t and axial stress σa = pr/(2t); these are the principal stresses in the wall.

Wall stresses

r = 1500/2 = 750 mm
σh = pr/t = 0.5·750/15 = 25 MPa
σa = pr/(2t) = 12.5 MPa

Transform to the seam

Take x along the axis (σa) and y around the hoop (σh). The seam’s normal makes 90° − α with the axis.

σn = 12.5·sin²40° + 25·cos²40° = 19.84 MPa

Answer

σn = 19.84 MPa
7.Axial stress & strain

Answer: δ = 0.06211 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·30²/4 = 706.9 mm²
At = π(100² − 60²)/4 = 5027 mm²

Combined axial stiffness

ΣEA = 200·10³·706.9 + 100·10³·5027 = 6.44 × 10⁸ N

Shortening

δ = 80000·500/6.44 × 10⁸ = 0.06211 mm

Answer

δ = 0.06211 mm
8.Axial stress & strain

Answer: δ = 0.853 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·16²/4 = 201.1 mm²
σ1 = 27.85 MPa
σ2 = 174.1 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 27.85·1500/100000 = 0.4178 mm
δ2 = σ2L2/E2 = 174.1·500/200000 = 0.4352 mm
δ = δ1 + δ2 = 0.853 mm

Answer

δ = 0.853 mm
9.Column buckling

Answer: Pcr = 3.109 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A rectangle buckles about its weak axis, using the smaller dimension cubed.

Imin = h·b³/12 = 50·30³/12 = 112500 mm⁴

Effective length

KL = 1·5000 = 5000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·112500/5000² = 3109 N = 3.109 kN

Answer

Pcr = 3.109 kN
10.Column buckling

Answer: σcr = 6.218 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Radius of gyration and slenderness

A = 2827 mm²
r = √(I/A) = √(636173/2827) = 15 mm
KL = 2·2500 = 5000 mm
KL/r = 5000/15 = 333.3

Critical stress

σcr = π²E/(KL/r)² = π²·70000/333.3² = 6.218 MPa

Answer

σcr = 6.218 MPa
11.Mechanical vibrations

Answer: ζ = 0.249

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Critical damping

cc = 2·√(k·m) = 2·√(200000·8) = 2530 N·s/m

Damping ratio

ζ = c/cc = 630/2530 = 0.249

Answer

ζ = 0.249

ζ < 1, so the system is underdamped and oscillates as it decays.

12.Mechanical vibrations

Answer: keq = 45 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs side by side share the deflection and add their forces, so their stiffnesses simply add: k = k1 + k2.

keq = 20 + 25 = 45 kN/m

Answer

keq = 45 kN/m

ExamProblems · examproblems.com/courses/machine-design