Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 18N2​ = 30

A 7.5 kW motor running at 2900 rpm drives a pinion with 18 teeth, which meshes with a gear with 30 teeth. The gear pair has an efficiency of 95%. Find the output torque T2 on the gear shaft.

P = 7.5 kWn1 = 2900 rpmN1 = 18N2 = 30η = 95%
T2 = N·m
2.Gears & gear trainsHard
A = 20B = 45C = 30D = 72

In a compound gear train, gear A (20 teeth) on the input shaft turning at 1440 rpm drives gear B (45 teeth). Gear C (30 teeth) is fixed to the same shaft as B and drives gear D (72 teeth) on the output shaft. Find the output speed nout.

nin = 1440 rpmA = 20B = 45C = 30D = 72
nout = rpm
3.Torsion of shaftsMedium
do​ = ?T = 100 N·m

A hollow shaft must carry a torque of 100 N·m. Its inner diameter is to be 0.6 times its outer diameter, and the shear stress must not exceed 60 MPa. Find the smallest outer diameter do.

T = 100 N·mdi/do = 0.6τallow = 60 MPa
do = mm
4.Torsion of shaftsHard
d = ?15 kW, 300 rpm

A solid aluminium shaft transmits 15 kW at 300 rpm. The shear stress must not exceed 50 MPa and the twist must not exceed 0.75° per m of length. Find the smallest diameter d that satisfies both limits.

P = 15 kWN = 300 rpmτallow = 50 MPaθallow = 0.75°/mG = 26 GPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 80σy​ = −80τxy​ = 60MPa

A point in a loaded part has σₓ = 80 MPa, σᵧ = −80 MPa and τₓᵧ = 60 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 80 MPaσy = −80 MPaτxy = 60 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = −50σy​ = −50τxy​ = 50MPa

A point in a thin plate is in plane stress: σₓ = −50 MPa, σᵧ = −50 MPa and τₓᵧ = 50 MPa (σz = 0). The material has a yield strength of 460 MPa. Find the factor of safety n against yielding by the von Mises (distortion energy) criterion.

σx = −50 MPaσy = −50 MPaτxy = 50 MPaσY = 460 MPa
n =
7.Axial stress & strainMedium
Ø 10 mmCopper0.5 mP = 40 kN

Find the axial strain ε in the copper bar, in microstrain (µε = 10⁻⁶).

P = 40 kNd = 10 mmL = 0.5 mE = 117 GPa
ε = µε
8.Axial stress & strainHard
Ø 40 mmAluminium2 mØ 12 mmBrass1 mP = 105 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 105 kNsegment 1: Ø40 mm, 2 m, aluminium (E = 70 GPa)segment 2: Ø12 mm, 1 m, brass (E = 100 GPa)
δ = mm
9.Column bucklingMedium
PL = 5 md = 50 mmcross-section

A column of length L made of steel is fixed at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 5 mE = 200 GPa (steel)d = 50 mm
Pcr = kN
10.Column bucklingHard
P = 70 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is fixed at the base and pinned at the top. It must carry 70 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 70 kNn = 2L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 10 kN/mζ = 0.35m = 2 kg

A 2 kg mass on a spring with a stiffness of 10 kN/m has a viscous damper giving a damping ratio of 0.35. Find the damped natural frequency fd of its free vibration in Hz.

m = 2 kgk = 10 kN/mζ = 0.35
fd = Hz
12.Mechanical vibrationsHard
k1​ = 25k2​ = 50m = 100 kg

A 100 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 25 kN/m and the lower one k₂ = 50 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 100 kgk1 = 25 kN/mk2 = 50 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T2 = 39.1 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·2900/60 = 303.7 rad/s
T1 = P/ω₁ = 7500/303.7 = 24.7 N·m

Output torque

T2 = 24.7·30/18·0.95 = 39.1 N·m

Answer

T2 = 39.1 N·m
2.Gears & gear trains

Answer: nout = 266.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1440·20/45 = 640 rpm = nC

Second stage

nout = 640·30/72 = 266.7 rpm

Answer

nout = 266.7 rpm

total ratio = 5.4 : 1

3.Torsion of shafts

Answer: do = 21.36 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Outer diameter from the allowable stress

T = 100 N·m = 100000 N·mm
1 − k⁴ = 1 − 0.6⁴ = 0.8704
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·100000/(π·60·0.8704)) = 21.36 mm
di = 0.6·21.36 = 12.82 mm

Answer

do = 21.36 mm

A solid shaft would need d = 20.4 mm; the hollow one is a little larger but much lighter.

4.Torsion of shafts

Answer: d = 61.48 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·300/60 = 31.42 rad/s
T = P/ω = 15000/31.42 = 477.5 N·m

Diameter for strength

T = 477.5 N·m = 477465 N·mm
dτ = ∛(16·477465/(π·50)) = 36.5 mm

Diameter for stiffness

θ = 0.75·π/180/1000 = 1.309 × 10⁻⁵ rad/mm
G = 26 GPa = 26000 MPa
dφ = (32·477465/(π·26000·1.309 × 10⁻⁵))1/4 = 61.48 mm

Governing diameter

Both limits must hold, so the larger diameter governs.

d = max(36.5, 61.48) = 61.48 mm

Answer

d = 61.48 mm

Here stiffness governs.

5.Mohr’s circle & stress transformation

Answer: τmax = 100 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((80 − −80)/2)² + 60²) = 100 MPa

Answer

τmax = 100 MPa
6.Mohr’s circle & stress transformation

Answer: n = 4.6

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = −50 MPa, R = 50 MPa
σ1 = 0 MPa, σ2 = −100 MPa, σ3 = 0

Von Mises

σvM = √(0² − 0·(−100) + (−100)²) = 100 MPa
n = 460/100 = 4.6

Answer

n = 4.6

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: ε = 4353 µε

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·10²/4 = 78.54 mm²
σ = P/A = 40·1000/78.54 = 509.3 MPa

Strain (Hooke’s law)

E for copper = 117 GPa = 117000 MPa.

ε = σ/E = 509.3/117000 = 0.004353 = 4353 µε

Answer

ε = 4353 µε
8.Axial stress & strain

Answer: δ = 11.67 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·40²/4 = 1257 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 83.56 MPa
σ2 = 928.4 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 83.56·2000/70000 = 2.387 mm
δ2 = σ2L2/E2 = 928.4·1000/100000 = 9.284 mm
δ = δ1 + δ2 = 11.67 mm

Answer

δ = 11.67 mm
9.Column buckling

Answer: Pcr = 96.89 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·50⁴/64 = 306796 mm⁴

Effective length

KL = 0.5·5000 = 2500 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·306796/2500² = 96895 N = 96.89 kN

Answer

Pcr = 96.89 kN
10.Column buckling

Answer: d = 58.01 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·70000 = 140000 N
KL = 0.7·4000 = 2800 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·140000·2800²/(π³·200000))^(1/4) = 58.01 mm

Answer

d = 58.01 mm

Check: the slenderness KL/r is 193.1, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 10.54 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(10000/2) = 70.71 rad/s
fn = 70.71/(2π) = 11.25 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 11.25·√(1 − 0.35²) = 10.54 Hz

Answer

fd = 10.54 Hz
12.Mechanical vibrations

Answer: fn = 2.055 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/25 + 1/50 → keq = 25·50/(25 + 50) = 16.67 kN/m

Natural frequency

ωn = √(16667/100) = 12.91 rad/s
fn = 12.91/(2π) = 2.055 Hz

Answer

fn = 2.055 Hz

ExamProblems · examproblems.com/courses/machine-design