Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
Nw​ = 36z = 3, 960 rpm

A worm with 3 start(s) turns at 960 rpm and drives a worm wheel with 36 teeth. Find the speed nw of the wheel.

z = 3Nw = 36n = 960 rpm
nw = rpm
2.Gears & gear trainsHard
A = 30B = 50C = 24D = ?

In a compound gear train, gear A (30 teeth) on the input shaft turns at 3000 rpm and drives gear B (50 teeth). Gear C (24 teeth) is fixed to the same shaft as B and drives gear D on the output shaft. The output must turn at 1728 rpm. How many teeth ND must gear D have?

nin = 3000 rpmA = 30B = 50C = 24nout = 1728 rpm
ND =
3.Torsion of shaftsMedium
d = 20 mmT = 40 N·m200 mmφ = 1.12°

In a torsion test, a solid specimen of diameter 20 mm is twisted by a torque of 40 N·m. The two ends of a gauge length of 200 mm rotate 1.12° relative to each other (the material is still elastic). Find the shear modulus G of the material.

T = 40 N·md = 20 mmL = 200 mmφ = 1.12°
G = GPa
4.Torsion of shaftsHard
do​ = ?100 kW, 750 rpm

A hollow shaft must transmit 100 kW at 750 rpm. Its inner diameter is to be 0.75 times its outer diameter, and the shear stress must not exceed 75 MPa. Find the smallest outer diameter do.

P = 100 kWN = 750 rpmdi/do = 0.75τallow = 75 MPa
do = mm
5.Mohr’s circle & stress transformationMedium
σx​ = −80σy​ = −80τxy​ = 40MPa

A point has σₓ = −80 MPa, σᵧ = −80 MPa and τₓᵧ = 40 MPa (tension positive). The element is rotated 30° counter-clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = −80 MPaσy = −80 MPaτxy = 40 MPaθ = 30°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 10σy​ = −20τxy​ = −40MPa

A point in a loaded part has σₓ = 10 MPa, σᵧ = −20 MPa and τₓᵧ = −40 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 50° counter-clockwise from the x-axis.

σx = 10 MPaσy = −20 MPaτxy = −40 MPaθ = 50°
σθ = MPa
7.Axial stress & strainMedium
Ø 25 mmCopper0.5 mP = 95 kN

Find the elongation δ of the copper bar under the axial load.

P = 95 kNd = 25 mmL = 0.5 mE = 117 GPa
δ = mm
8.Axial stress & strainHard
Ø 25 mmCopper0.5 mØ 16 mmSteel1 mP = 40 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 40 kNsegment 1: Ø25 mm, 0.5 m, copper (E = 117 GPa)segment 2: Ø16 mm, 1 m, steel (E = 200 GPa)
δ = mm
9.Column bucklingMedium
PL = 4 md = 60 mmcross-section

A column of length L made of aluminium is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 4 mE = 70 GPa (aluminium)d = 60 mm
Pcr = kN
10.Column bucklingHard
P = 80 kNL = 4 md = ?cross-section

A solid round column of length L made of steel is pinned at both ends. It must carry 80 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 80 kNn = 2L = 4 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 150 kN/mζ = 0.4m = 10 kg

A 10 kg mass on a spring with a stiffness of 150 kN/m has a viscous damper giving a damping ratio of 0.4. Find the damped natural frequency fd of its free vibration in Hz.

m = 10 kgk = 150 kN/mζ = 0.4
fd = Hz
12.Mechanical vibrationsHard
k1​ = 100k2​ = 40m = 50 kg

A 50 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 100 kN/m and the lower one k₂ = 40 kN/m. Ignore damping and the masses of the springs. Find the natural frequency fn of vertical vibration in Hz.

m = 50 kgk1 = 100 kN/mk2 = 40 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: nw = 80 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 960·3/36 = 80 rpm

Answer

nw = 80 rpm
2.Gears & gear trains

Answer: ND = 25

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Intermediate shaft speed

nB = nC = 3000·30/50 = 1800 rpm

Teeth on gear D

ND = C·nC/nout = 24·1800/1728 = 25

Answer

ND = 25
3.Torsion of shafts

Answer: G = 26.05 GPa

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar moment and angle

J = π·20⁴/32 = 15708 mm⁴
φ = 1.12·π/180 = 0.01955 rad

Shear modulus

T = 40 N·m = 40000 N·mm
G = TL/(Jφ) = 40000·200/(15708·0.01955) = 26054 MPa
G = 26.05 GPa

Answer

G = 26.05 GPa

Compare: steel ≈ 80 GPa, brass ≈ 39 GPa, aluminium ≈ 26 GPa.

4.Torsion of shafts

Answer: do = 50.2 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 100000/78.54 = 1273 N·m

Outer diameter from the allowable stress

T = 1273 N·m = 1.273 × 10⁶ N·mm
1 − k⁴ = 1 − 0.75⁴ = 0.6836
do = ∛(16T/(π·τallow·(1 − k⁴))) = ∛(16·1.273 × 10⁶/(π·75·0.6836)) = 50.2 mm
di = 0.75·50.2 = 37.65 mm

Answer

do = 50.2 mm

A solid shaft would need d = 44.22 mm; the hollow one is a little larger but much lighter.

5.Mohr’s circle & stress transformation

Answer: σy′ = −114.6 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = −80 − 0·0.5 − 40·0.866 = −114.6 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = −45.36 MPa, σx′ + σy′ = −160 = σx + σy

Answer

σy′ = −114.6 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = −47 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = −5 + 15·−0.1736 + −40·0.9848 = −47 MPa

Answer

σθ = −47 MPa
7.Axial stress & strain

Answer: δ = 0.8271 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·25²/4 = 490.9 mm²
σ = P/A = 95·1000/490.9 = 193.5 MPa

Strain (Hooke’s law)

E for copper = 117 GPa = 117000 MPa.

ε = σ/E = 193.5/117000 = 0.001654 = 1654 µε

Elongation

δ = ε·L = 0.001654·500 mm = 0.8271 mm

Answer

δ = 0.8271 mm
8.Axial stress & strain

Answer: δ = 1.343 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·16²/4 = 201.1 mm²
σ1 = 81.49 MPa
σ2 = 198.9 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 81.49·500/117000 = 0.3482 mm
δ2 = σ2L2/E2 = 198.9·1000/200000 = 0.9947 mm
δ = δ1 + δ2 = 1.343 mm

Answer

δ = 1.343 mm
9.Column buckling

Answer: Pcr = 56.06 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Effective length

KL = 0.7·4000 = 2800 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·636173/2800² = 56060 N = 56.06 kN

Answer

Pcr = 56.06 kN
10.Column buckling

Answer: d = 71.69 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·80000 = 160000 N
KL = 1·4000 = 4000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·160000·4000²/(π³·200000))^(1/4) = 71.69 mm

Answer

d = 71.69 mm

Check: the slenderness KL/r is 223.2, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 17.87 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(150000/10) = 122.5 rad/s
fn = 122.5/(2π) = 19.49 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 19.49·√(1 − 0.4²) = 17.87 Hz

Answer

fd = 17.87 Hz
12.Mechanical vibrations

Answer: fn = 3.805 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/100 + 1/40 → keq = 100·40/(100 + 40) = 28.57 kN/m

Natural frequency

ωn = √(28571/50) = 23.9 rad/s
fn = 23.9/(2π) = 3.805 Hz

Answer

fn = 3.805 Hz

ExamProblems · examproblems.com/courses/machine-design