Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
d1​ = 100 mmd2​ = 300 mm1440 rpmT1​ = 500 NT2​ = 200 NP = ?

A belt runs on a 100 mm driving pulley at 1440 rpm. The tension is 500 N on the tight side and 200 N on the slack side. Find the power P transmitted, in kW.

d1 = 100 mmn1 = 1440 rpmT1 = 500 NT2 = 200 N
P = kW
2.Gears & gear trainsHard
A = 25B = 40C = 18D = 48

In a compound gear train, gear A (25 teeth) on the input shaft turning at 2900 rpm drives gear B (40 teeth). Gear C (18 teeth) is fixed to the same shaft as B and drives gear D (48 teeth) on the output shaft. Find the output speed nout.

nin = 2900 rpmA = 25B = 40C = 18D = 48
nout = rpm
3.Torsion of shaftsMedium
do​ = 60, di​ = 30 mmT = 2000 N·mL = 2.5 m

A hollow aluminium shaft (outer diameter 60 mm, inner diameter 30 mm, length 2.5 m) is fixed at one end and twisted by a torque of 2000 N·m at the other. Find the angle of twist φ in degrees.

T = 2000 N·mdo = 60 mmdi = 30 mmL = 2.5 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 50 kW at 3000 rpm without the shear stress exceeding 75 MPa. Find the smallest diameter d that works.

P = 50 kWN = 3000 rpmτallow = 75 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 120σy​ = 100MPaτxy​ = ?

A point has σₓ = 120 MPa and σᵧ = 100 MPa. How large can the shear stress τxy (magnitude) become before the largest principal stress reaches 170 MPa?

σx = 120 MPaσy = 100 MPaσ1 = 170 MPa
τxy = MPa
6.Mohr’s circle & stress transformationHard
σx​ = −10σy​ = −60τxy​ = −60MPa

A point in a loaded part has σₓ = −10 MPa, σᵧ = −60 MPa and τₓᵧ = −60 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 50° counter-clockwise from the x-axis.

σx = −10 MPaσy = −60 MPaτxy = −60 MPaθ = 50°
σθ = MPa
7.Axial stress & strainMedium
P = ?12300 mm300 mmØ40Ø50δ = 0.3 mm

A bar is made of a steel segment (diameter 40 mm, length 300 mm, E = 200 GPa) joined end to end with a segment made of copper (diameter 50 mm, length 300 mm, E = 120 GPa). It is fixed at one end and pulled at the other. Find the axial load P that stretches it by 0.3 mm in total.

segment 1: steel, Ø40 mm, 300 mm, E = 200 GPasegment 2: copper, Ø50 mm, 300 mm, E = 120 GPaδ = 0.3 mm
P = kN
8.Axial stress & strainHard
100 kN12600 mm500 mmØ30Ø30σ2​ = ?

A steel segment (diameter 30 mm, length 600 mm, E = 200 GPa) and a segment made of bronze (diameter 30 mm, length 500 mm, E = 110 GPa) are joined end to end and fixed between two rigid walls. An axial load of 100 kN acts at the joint, towards segment 2. Find the magnitude of the stress σ2 in segment 2.

segment 1: steel, Ø30 mm, 600 mm, E = 200 GPasegment 2: bronze, Ø30 mm, 500 mm, E = 110 GPaP = 100 kN
σ2 = MPa
9.Column bucklingMedium
PL = 3 md = 25 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Using Euler’s formula, find its critical buckling load Pcr.

L = 3 mE = 200 GPa (steel)d = 25 mm
Pcr = kN
10.Column bucklingHard
PL = 3 md = 25 mmcross-section

A column of length L made of steel is fixed at the base and pinned at the top. Find its slenderness and the critical buckling stress σcr from Euler’s formula.

L = 3 mE = 200 GPa (steel)d = 25 mm
σcr = MPa
11.Mechanical vibrationsMedium
tx15 mm1 cycle5.8 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 15 mm is followed one cycle later by a peak of 5.8 mm. Find the damping ratio ζ.

x0 = 15 mmx1 = 5.8 mmn = 1
ζ =
12.Mechanical vibrationsHard
k1​ = 30k2​ = 20m = 40 kg

A 40 kg mass hangs from two springs connected end to end (in series): the upper spring has k₁ = 30 kN/m and the lower one k₂ = 20 kN/m. Find the equivalent stiffness keq of the spring system in kN/m.

m = 40 kgk1 = 30 kN/mk2 = 20 kN/m
keq = kN/m

3Solutions

1.Gears & gear trains

Answer: P = 2.262 kW

Belt drives: without slip, both pulleys have the same rim speed v = π·d·n/60, so n₁·d₁ = n₂·d₂ and the speed ratio is d₂/d₁. Slip s makes the driven pulley a little slower: n₂ = n₁·(d₁/d₂)·(1 − s). The power transmitted is P = (T₁ − T₂)·v, with T₁ the tension on the tight side and T₂ on the slack side. Friction limits the ratio of the tensions: T₁/T₂ = eμθ, where θ is the angle of wrap in radians on the smaller pulley; for an open belt θ = π − 2·asin((d₂ − d₁)/(2C)) with centre distance C.

Belt speed

v = 7.54 m/s

Power

P = (500 − 200)·7.54 = 2262 W = 2.262 kW

Answer

P = 2.262 kW
2.Gears & gear trains

Answer: nout = 679.7 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 2900·25/40 = 1813 rpm = nC

Second stage

nout = 1813·18/48 = 679.7 rpm

Answer

nout = 679.7 rpm

total ratio = 4.267 : 1

3.Torsion of shafts

Answer: φ = 9.237 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π(60⁴ − 30⁴)/32 = 1.193 × 10⁶ mm⁴

Angle of twist

T = 2000 N·m = 2 × 10⁶ N·mm
L = 2.5 m = 2500 mm
G = 26 GPa = 26000 MPa
φ = TL/(GJ) = 2 × 10⁶·2500/(26000·1.193 × 10⁶) = 0.1612 rad
φ = 0.1612·180/π = 9.237°

Answer

φ = 9.237°
4.Torsion of shafts

Answer: d = 22.11 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·3000/60 = 314.2 rad/s
T = P/ω = 50000/314.2 = 159.2 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·159155/(π·75)) = 22.11 mm

Answer

d = 22.11 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τxy = 59.16 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Required radius

C = (120 + 100)/2 = 110 MPa
R = σ1 − C = 170 − 110 = 60 MPa
στxyCσ1​σ2​

Shear stress

τxy = √(R² − ((σₓ − σᵧ)/2)²) = √(60² − 10²) = 59.16 MPa

Answer

τxy = 59.16 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = −98.43 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = −35 + 25·−0.1736 + −60·0.9848 = −98.43 MPa

Answer

σθ = −98.43 MPa
7.Axial stress & strain

Answer: P = 121.6 kN

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

A₁ = 1257 mm², A₂ = 1963 mm²

Flexibilities

L₁/(E₁A₁) = 300/(200000·1257) = 1.194 × 10⁻⁶ mm/N
L₂/(E₂A₂) = 300/(120000·1963) = 1.273 × 10⁻⁶ mm/N

Load

P = 0.3/2.467 × 10⁻⁶ = 121610 N = 121.6 kN

Answer

P = 121.6 kN
8.Axial stress & strain

Answer: σ2 = 56.25 MPa

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Stiffnesses

k₁ = 200000·706.9/600 = 235619 N/mm
k₂ = 110000·706.9/500 = 155509 N/mm

Share of segment 2

F2 = 100000·155509/391128 = 39759 N

Stress

σ2 = 39759/706.9 = 56.25 MPa (compression)

Answer

σ2 = 56.25 MPa
9.Column buckling

Answer: Pcr = 8.583 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·25⁴/64 = 19175 mm⁴

Effective length

KL = 0.7·3000 = 2100 mm

Critical load

Pcr = π²EI/(KL)² = π²·200000·19175/2100² = 8583 N = 8.583 kN

Answer

Pcr = 8.583 kN
10.Column buckling

Answer: σcr = 17.48 MPa

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·25⁴/64 = 19175 mm⁴

Radius of gyration and slenderness

A = 490.9 mm²
r = √(I/A) = √(19175/490.9) = 6.25 mm
KL = 0.7·3000 = 2100 mm
KL/r = 2100/6.25 = 336

Critical stress

σcr = π²E/(KL/r)² = π²·200000/336² = 17.48 MPa

Answer

σcr = 17.48 MPa
11.Mechanical vibrations

Answer: ζ = 0.1495

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/1)·ln(15/5.8) = 0.9502

Damping ratio

ζ = δ/√(4π² + δ²) = 0.9502/√(39.48 + 0.9029) = 0.1495

Answer

ζ = 0.1495
12.Mechanical vibrations

Answer: keq = 12 kN/m

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Springs in series share the same force and add their deflections, so they combine as reciprocals: 1/k = 1/k1 + 1/k2.

1/keq = 1/30 + 1/20 → keq = 30·20/(30 + 20) = 12 kN/m

Answer

keq = 12 kN/m

ExamProblems · examproblems.com/courses/machine-design