Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
N1​ = 30N2​ = 48

A 1.1 kW motor running at 1500 rpm drives a pinion with 30 teeth, which meshes with a gear with 48 teeth. The gear pair has an efficiency of 95%. Find the torque T1 on the motor shaft.

P = 1.1 kWn1 = 1500 rpmN1 = 30N2 = 48η = 95%
T1 = N·m
2.Gears & gear trainsHard
A = 40B = 48C = 25D = 60

In a compound gear train, gear A (40 teeth) on the input shaft turning at 1500 rpm drives gear B (48 teeth). Gear C (25 teeth) is fixed to the same shaft as B and drives gear D (60 teeth) on the output shaft. Find the output speed nout.

nin = 1500 rpmA = 40B = 48C = 25D = 60
nout = rpm
3.Torsion of shaftsMedium
T = 750 N·md = 50 mmL = 1 mφ = ?

A solid aluminium shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 750 N·md = 50 mmL = 1 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 50 kW at 500 rpm without the shear stress exceeding 80 MPa. Find the smallest diameter d that works.

P = 50 kWN = 500 rpmτallow = 80 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 130σy​ = −70τxy​ = 20MPa

A point has σₓ = 130 MPa, σᵧ = −70 MPa and τₓᵧ = 20 MPa (tension positive). The element is rotated 35° counter-clockwise. Find the normal stress σy′ on the faces of the rotated element that are perpendicular to the rotated y′-axis.

σx = 130 MPaσy = −70 MPaτxy = 20 MPaθ = 35°
σy′ = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 60σy​ = −70τxy​ = 30MPa

A point in a thin plate is in plane stress: σₓ = 60 MPa, σᵧ = −70 MPa and τₓᵧ = 30 MPa (σz = 0). The material has a yield strength of 300 MPa. Find the factor of safety n against yielding by the von Mises (distortion energy) criterion.

σx = 60 MPaσy = −70 MPaτxy = 30 MPaσY = 300 MPa
n =
7.Axial stress & strainMedium
50 kNØ3070 GPaØ80/60400 mmδ = ?

A steel rod (diameter 30 mm, E = 200 GPa) sits inside a tube made of aluminium (outer diameter 80 mm, inner diameter 60 mm, E = 70 GPa). Both are 400 mm long and are compressed together between rigid plates by 50 kN. Find the shortening δ.

P = 50 kNrod: Ø30 mm, E = 200 GPatube: Ø80/Ø60 mm, E = 70 GPaL = 400 mm
δ = mm
8.Axial stress & strainHard
Ø 25 mmBrass1.5 mØ 12 mmCopper1 mP = 40 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the total elongation δ.

P = 40 kNsegment 1: Ø25 mm, 1.5 m, brass (E = 100 GPa)segment 2: Ø12 mm, 1 m, copper (E = 117 GPa)
δ = mm
9.Column bucklingMedium
PL = 2 md = 60 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2 mE = 70 GPa (aluminium)d = 60 mm
Pcr = kN
10.Column bucklingHard
P = 100 kNL = 5 md = ?cross-section

A solid round column of length L made of aluminium is fixed at the base and pinned at the top. It must carry 100 kN with a factor of safety of 2 against buckling. Find the smallest diameter d.

P = 100 kNn = 2L = 5 mE = 70 GPa (aluminium)
d = mm
11.Mechanical vibrationsMedium
tx25 mm4 cycles15.1 mm

In a free-vibration test of a damped mass–spring system, a displacement peak of 25 mm is followed 4 cycles later by a peak of 15.1 mm. Find the damping ratio ζ.

x0 = 25 mmx4 = 15.1 mmn = 4
ζ =
12.Mechanical vibrationsHard
k1​ = 15k2​ = 15k3​ = 60m = 5 kg

A 5 kg mass hangs from spring k₃ = 60 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 15 kN/m and k₂ = 15 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 15 kN/mk2 = 15 kN/mk3 = 60 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: T1 = 7.003 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Motor torque

ω₁ = 2π·1500/60 = 157.1 rad/s
T1 = P/ω₁ = 1100/157.1 = 7.003 N·m

Answer

T1 = 7.003 N·m
2.Gears & gear trains

Answer: nout = 520.8 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 1500·40/48 = 1250 rpm = nC

Second stage

nout = 1250·25/60 = 520.8 rpm

Answer

nout = 520.8 rpm

total ratio = 2.88 : 1

3.Torsion of shafts

Answer: φ = 2.694 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·50⁴/32 = 613592 mm⁴

Angle of twist

φ = TL/(GJ) = 750·1000·1000/(26000·613592) = 0.04701 rad
φ = 0.04701·180/π = 2.694°

Answer

φ = 2.694°
4.Torsion of shafts

Answer: d = 39.32 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·500/60 = 52.36 rad/s
T = P/ω = 50000/52.36 = 954.9 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·954930/(π·80)) = 39.32 mm

Answer

d = 39.32 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: σy′ = −23 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation for the y′ face

σy′ = 30 − 100·0.342 − 20·0.9397 = −23 MPa

Check

The sum of the normal stresses does not change with rotation.

σx′ = 83 MPa, σx′ + σy′ = 60 = σx + σy

Answer

σy′ = −23 MPa
6.Mohr’s circle & stress transformation

Answer: n = 2.417

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R. Yield criteria: von Mises predicts yield when σvM = √(σ₁² − σ₁σ₂ + σ₂²) reaches σY; Tresca when the absolute maximum shear stress reaches σY/2.

στxyCσ1​σ2​

Principal stresses

C = −5 MPa, R = 71.59 MPa
σ1 = 66.59 MPa, σ2 = −76.59 MPa, σ3 = 0

Von Mises

σvM = √(66.59² − 66.59·(−76.59) + (−76.59)²) = 124.1 MPa
n = 300/124.1 = 2.417

Answer

n = 2.417

n > 1 means the point does not yield; Tresca is slightly more conservative than von Mises.

7.Axial stress & strain

Answer: δ = 0.06773 mm

Two materials: in series (one after the other) every segment carries the same force and the elongations add: δ = P·Σ L/(E·A). In parallel (side by side between rigid plates) both parts shorten by the same amount, so their strains are equal: the stiffer part takes the larger share, Pi = P·EiAi/ΣEA, and σi = Ei·ε. A bar held between two rigid walls with a load at the junction is statically indeterminate: the two segments share the load in proportion to their stiffness k = EA/L.

Areas

Ar = π·30²/4 = 706.9 mm²
At = π(80² − 60²)/4 = 2199 mm²

Combined axial stiffness

ΣEA = 200·10³·706.9 + 70·10³·2199 = 2.953 × 10⁸ N

Shortening

δ = 50000·400/2.953 × 10⁸ = 0.06773 mm

Answer

δ = 0.06773 mm
8.Axial stress & strain

Answer: δ = 4.245 mm

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·12²/4 = 113.1 mm²
σ1 = 81.49 MPa
σ2 = 353.7 MPa

Add the segment elongations

δ1 = σ1L1/E1 = 81.49·1500/100000 = 1.222 mm
δ2 = σ2L2/E2 = 353.7·1000/117000 = 3.023 mm
δ = δ1 + δ2 = 4.245 mm

Answer

δ = 4.245 mm
9.Column buckling

Answer: Pcr = 109.9 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·60⁴/64 = 636173 mm⁴

Effective length

KL = 1·2000 = 2000 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·636173/2000² = 109878 N = 109.9 kN

Answer

Pcr = 109.9 kN
10.Column buckling

Answer: d = 92.19 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 2·100000 = 200000 N
KL = 0.7·5000 = 3500 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·200000·3500²/(π³·70000))^(1/4) = 92.19 mm

Answer

d = 92.19 mm

Check: the slenderness KL/r is 151.9, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: ζ = 0.02006

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Logarithmic decrement

δ = (1/4)·ln(25/15.1) = 0.126

Damping ratio

ζ = δ/√(4π² + δ²) = 0.126/√(39.48 + 0.01589) = 0.02006

Answer

ζ = 0.02006
12.Mechanical vibrations

Answer: fn = 10.07 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 15 + 15 = 30 kN/m
keq = 30·60/(30 + 60) = 20 kN/m

Natural frequency

ωn = √(20000/5) = 63.25 rad/s
fn = 63.25/(2π) = 10.07 Hz

Answer

fn = 10.07 Hz

ExamProblems · examproblems.com/courses/machine-design