Machine Design: cram pack

Formula sheets, the key method steps for every topic and 12 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Gears & gear trains

Meshing gears
n1·N1 = n2·N2
Torque
T2 = T1·(N2/N1)·η
Power
P = T·ω, ω = 2π·n/60
Compound train
total ratio = product of the stage ratios

Torsion of shafts

Shear stress
τ = T·r/J
Solid shaft
J = πd⁴/32
Hollow shaft
J = π(D⁴ − d⁴)/32
Angle of twist
φ = TL/(GJ)
Power
P = T·ω = 2πnT/60

Method

  1. Find the polar moment of area: J = πd⁴/32 for a solid shaft.
  2. Shear stress at the surface: τ = T·r/J, with r the outer radius.
  3. Angle of twist: φ = TL/(GJ) in radians.
  4. If power is given, find the torque first with P = T·ω, ω = 2πn/60.

Mohr’s circle & stress transformation

Centre
C = (σx + σy)/2
Radius
R = √(((σx − σy)/2)² + τxy²)
Principal stresses
σ1,2 = C ± R
Principal direction
tan 2θp = 2τxy/(σx − σy)
Inclined plane
σθ = C + (σx − σy)/2·cos 2θ + τxy·sin 2θ

Method

  1. Calculate the centre of Mohr’s circle: C = (σx + σy)/2.
  2. Calculate the radius: R = √(((σx − σy)/2)² + τxy²).
  3. The principal stresses are C ± R and the largest in-plane shear stress is R.
  4. Angles on the circle are double the angles on the element: tan 2θp = 2τxy/(σx − σy).

Axial stress & strain

Normal stress
σ = F/A
Strain
ε = ΔL/L
Hooke’s law
σ = E·ε
Elongation
ΔL = FL/(EA)
Thermal strain
εT = α·ΔT

Column buckling

Euler load
Pcr = π²EI/(KL)²
Effective length factor
K = 1 pinned–pinned, 0.5 fixed–fixed, 0.7 fixed–pinned, 2 fixed–free
Critical stress
σcr = Pcr/A
Slenderness
λ = KL/r, r = √(I/A)

Mechanical vibrations

Natural frequency
ωn = √(k/m), fn = ωn/(2π)
From static deflection
ωn = √(g/δst)
Critical damping
cc = 2√(km) = 2mωn
Damping ratio
ζ = c/cc
Damped frequency
ωd = ωn√(1 − ζ²)
Logarithmic decrement
δ = (1/n)·ln(x0/xn), ζ = δ/√(4π² + δ²)
Springs in parallel
k = k1 + k2
Springs in series
1/k = 1/k1 + 1/k2

2Practice problems

1.Gears & gear trainsMedium
Tw​ = ?z = 4, 2900 rpm

A 1.1 kW motor at 2900 rpm drives a worm with 4 start(s). The worm wheel has 36 teeth and the drive has an efficiency of 60%. Find the output torque Tw on the wheel shaft.

z = 4Nw = 36n = 2900 rpmP = 1.1 kWη = 60%
Tw = N·m
2.Gears & gear trainsHard
A = 32B = 72C = 12D = 36

In a compound gear train, gear A (32 teeth) on the input shaft turning at 960 rpm drives gear B (72 teeth). Gear C (12 teeth) is fixed to the same shaft as B and drives gear D (36 teeth) on the output shaft. Find the output speed nout.

nin = 960 rpmA = 32B = 72C = 12D = 36
nout = rpm
3.Torsion of shaftsMedium
T = 750 N·md = 40 mmL = 1.2 mφ = ?

A solid aluminium shaft is fixed at the wall and twisted by a torque T at its free end. Find the angle of twist φ of the free end, in degrees.

T = 750 N·md = 40 mmL = 1.2 mG = 26 GPa
φ = °
4.Torsion of shaftsHard
Td = ?

A solid shaft must transmit 50 kW at 750 rpm without the shear stress exceeding 50 MPa. Find the smallest diameter d that works.

P = 50 kWN = 750 rpmτallow = 50 MPa
d = mm
5.Mohr’s circle & stress transformationMedium
σx​ = 150σy​ = −80τxy​ = 40MPa

A point in a loaded part has σₓ = 150 MPa, σᵧ = −80 MPa and τₓᵧ = 40 MPa (tension positive). Find the maximum in-plane shear stress τmax.

σx = 150 MPaσy = −80 MPaτxy = 40 MPa
τmax = MPa
6.Mohr’s circle & stress transformationHard
σx​ = 110σy​ = −60τxy​ = −10MPa

A point in a loaded part has σₓ = 110 MPa, σᵧ = −60 MPa and τₓᵧ = −10 MPa (tension positive). Find the normal stress σθ on a plane whose normal is rotated 45° clockwise from the x-axis.

σx = 110 MPaσy = −60 MPaτxy = −10 MPaθ = -45°
σθ = MPa
7.Axial stress & strainMedium
Ø 16 mmSteel1 mP = 85 kN

Find the elongation δ of the steel bar under the axial load.

P = 85 kNd = 16 mmL = 1 mE = 200 GPa
δ = mm
8.Axial stress & strainHard
Ø 25 mmAluminium0.5 mØ 20 mmSteel0.5 mP = 15 kN

The stepped bar is fixed at the wall and loaded at its free end. Find the largest normal stress σmax in the bar.

P = 15 kNsegment 1: Ø25 mm, 0.5 m, aluminium (E = 70 GPa)segment 2: Ø20 mm, 0.5 m, steel (E = 200 GPa)
σmax = MPa
9.Column bucklingMedium
PL = 2.5 md = 40 mmcross-section

A column of length L made of aluminium is pinned at both ends. Using Euler’s formula, find its critical buckling load Pcr.

L = 2.5 mE = 70 GPa (aluminium)d = 40 mm
Pcr = kN
10.Column bucklingHard
P = 135 kNL = 2 md = ?cross-section

A solid round column of length L made of steel is pinned at both ends. It must carry 135 kN with a factor of safety of 3 against buckling. Find the smallest diameter d.

P = 135 kNn = 3L = 2 mE = 200 GPa (steel)
d = mm
11.Mechanical vibrationsMedium
k = 100 kN/mζ = 0.45m = 80 kg

An 80 kg mass on a spring with a stiffness of 100 kN/m has a viscous damper giving a damping ratio of 0.45. Find the damped natural frequency fd of its free vibration in Hz.

m = 80 kgk = 100 kN/mζ = 0.45
fd = Hz
12.Mechanical vibrationsHard
k1​ = 12k2​ = 100k3​ = 20m = 5 kg

A 5 kg mass hangs from spring k₃ = 20 kN/m. The top of k₃ is attached to a rigid bar that hangs from two springs side by side, k₁ = 12 kN/m and k₂ = 100 kN/m; the bar stays level. Ignore damping and the masses of the springs and bar. Find the natural frequency fn of vertical vibration in Hz.

m = 5 kgk1 = 12 kN/mk2 = 100 kN/mk3 = 20 kN/m
fn = Hz

3Solutions

1.Gears & gear trains

Answer: Tw = 19.56 N·m

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

Wheel speed

nw = n·z/Nw = 2900·4/36 = 322.2 rpm

Output torque

ωw = 2π·322.2/60 = 33.74 rad/s
Tw = η·P/ωw = 0.6·1100/33.74 = 19.56 N·m

Answer

Tw = 19.56 N·m
2.Gears & gear trains

Answer: nout = 142.2 rpm

Gear trains: meshing gears have the same speed at the teeth, so n₁·N₁ = n₂·N₂: the gear with fewer teeth turns faster. Gears on one shaft turn at the same speed. Power is passed on (minus losses), so torque goes up when speed goes down: T₂ = T₁·(N₂/N₁)·η, and P = T·ω with ω = 2π·n/60.

First stage

nB = 960·32/72 = 426.7 rpm = nC

Second stage

nout = 426.7·12/36 = 142.2 rpm

Answer

nout = 142.2 rpm

total ratio = 6.75 : 1

3.Torsion of shafts

Answer: φ = 7.891 °

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Polar second moment of area

J = π·40⁴/32 = 251327 mm⁴

Angle of twist

φ = TL/(GJ) = 750·1000·1200/(26000·251327) = 0.1377 rad
φ = 0.1377·180/π = 7.891°

Answer

φ = 7.891°
4.Torsion of shafts

Answer: d = 40.18 mm

Torsion of circular shafts: shear stress grows linearly from zero at the centre to τmax = T·r/J at the surface, with J = πd⁴/32 for a solid shaft and J = π(do⁴ − di⁴)/32 for a hollow one. The angle of twist is φ = TL/(GJ) in radians. Power and torque are linked by P = T·ω.

Torque

ω = 2πN/60 = 2π·750/60 = 78.54 rad/s
T = P/ω = 50000/78.54 = 636.6 N·m

Diameter from the allowable stress

d = ∛(16T/(π·τallow)) = ∛(16·636620/(π·50)) = 40.18 mm

Answer

d = 40.18 mm

In practice you would round up to the next standard size.

5.Mohr’s circle & stress transformation

Answer: τmax = 121.8 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

στxyCτmax​

Radius of Mohr’s circle

τmax = R = √(((150 − −80)/2)² + 40²) = 121.8 MPa

Answer

τmax = 121.8 MPa
6.Mohr’s circle & stress transformation

Answer: σθ = 35 MPa

Plane stress transformation: on a plane rotated by θ, σ = (σₓ + σᵧ)/2 + (σₓ − σᵧ)/2·cos 2θ + τₓᵧ·sin 2θ. Mohr’s circle shows all planes at once: its centre is at C = (σₓ + σᵧ)/2 and its radius is R = √(((σₓ − σᵧ)/2)² + τₓᵧ²). The principal stresses are C ± R, and the largest in-plane shear stress is R.

Transformation equation

σθ = 25 + 85·0 + −10·−1 = 35 MPa

Answer

σθ = 35 MPa
7.Axial stress & strain

Answer: δ = 2.114 mm

Hooke’s law: within the elastic range σ = E·ε. Combining with σ = P/A and ε = δ/L gives δ = PL/(AE).

Stress

A = π·16²/4 = 201.1 mm²
σ = P/A = 85·1000/201.1 = 422.8 MPa

Strain (Hooke’s law)

E for steel = 200 GPa = 200000 MPa.

ε = σ/E = 422.8/200000 = 0.002114 = 2114 µε

Elongation

δ = ε·L = 0.002114·1000 mm = 2.114 mm

Answer

δ = 2.114 mm
8.Axial stress & strain

Answer: σmax = 47.75 MPa

Axially loaded members: each prismatic segment obeys δ = PL/(AE). For members in series the elongations add.

Same force in both segments

The free end carries P, so every section of the bar carries the same axial force P. Only the areas and materials change.

A1 = π·25²/4 = 490.9 mm², A2 = π·20²/4 = 314.2 mm²
σ1 = 30.56 MPa
σ2 = 47.75 MPa

Largest stress

The thinner segment has the smaller area, so it carries the larger stress.

σmax = 47.75 MPa

Answer

σmax = 47.75 MPa
9.Column buckling

Answer: Pcr = 13.89 kN

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Smallest second moment of area

A round section has the same I about every axis.

I = πd⁴/64 = π·40⁴/64 = 125664 mm⁴

Effective length

KL = 1·2500 = 2500 mm

Critical load

Pcr = π²EI/(KL)² = π²·70000·125664/2500² = 13891 N = 13.89 kN

Answer

Pcr = 13.89 kN
10.Column buckling

Answer: d = 63.94 mm

Euler buckling: a slender column becomes unstable at Pcr = π²EI/(KL)², where KL is the effective length: K = 1 for pinned–pinned, 2 for fixed–free, 0.7 for fixed–pinned and 0.5 for fixed–fixed. It buckles about the axis with the smallest I. The formula holds for slender columns, whose critical stress stays below the yield stress.

Required critical load

Pcr = n·P = 3·135000 = 405000 N
KL = 1·2000 = 2000 mm

Solve for the diameter

d = (64·n·P·(KL)²/(π³E))^(1/4) = (64·405000·2000²/(π³·200000))^(1/4) = 63.94 mm

Answer

d = 63.94 mm

Check: the slenderness KL/r is 125.1, so the column is slender and Euler applies.

11.Mechanical vibrations

Answer: fd = 5.025 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Undamped natural frequency

ωn = √(100000/80) = 35.36 rad/s
fn = 35.36/(2π) = 5.627 Hz

Damped natural frequency

fd = fn·√(1 − ζ²) = 5.627·√(1 − 0.45²) = 5.025 Hz

Answer

fd = 5.025 Hz
12.Mechanical vibrations

Answer: fn = 9.272 Hz

Free vibration of a mass–spring system: the undamped natural frequency is ωn = √(k/m) in rad/s, and fn = ωn/(2π) in Hz. A viscous damper c gives the damping ratio ζ = c/cc, with critical damping cc = 2·√(k·m) = 2·m·ωn. An underdamped system (ζ < 1) oscillates at ωd = ωn·√(1 − ζ²). Springs in parallel add, k = k₁ + k₂; springs in series add as reciprocals, 1/k = 1/k₁ + 1/k₂.

Equivalent stiffness

Only k1 and k2 are in parallel. That pair is in series with k3, so combine them as reciprocals.

k12 = 12 + 100 = 112 kN/m
keq = 112·20/(112 + 20) = 16.97 kN/m

Natural frequency

ωn = √(16970/5) = 58.26 rad/s
fn = 58.26/(2π) = 9.272 Hz

Answer

fn = 9.272 Hz

ExamProblems · examproblems.com/courses/machine-design