Formula sheets, the key method steps for every topic and 10 practice problems, with full solutions at the back.
A child weighing 26 kg is prescribed 2 mg/kg of a drug. The stock solution contains 10 mg/mL. Draw up the dose: what volume V do you give?
An infusion contains 25000 units of a drug in 250 mL. The prescription is 500 units per hour. At what rate R do you set the pump, in mL/h?
Infuse 1000 mL over 12 hours with a giving set of 10 gtt/mL. Find the drip rate R in drops per minute. Round to the nearest whole number.
A bag contains 200 mg of a drug in 250 mL and runs at 20 mL/h. How many milligrams per hour D does the patient receive?
Practice exercise (made-up values, not clinical guidance). An infusion contains 100 units of regular insulin in 250 mL. The order is 0.05 units/kg/h for a patient who weighs 58 kg. Find the pump rate R in mL/h. Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A bag contains dobutamine 250 mg in 250 mL. The order is 5 mcg/kg/min for a patient who weighs 57 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). The record shows a patient's intake and output for one 12-hour shift. The patient weighs 59 kg. Find the average urine output U in mL/kg/h. Round to two decimal places.
Practice exercise (made-up values, not clinical guidance). A 1000 mL infusion starts at 16:30 at 80 mL/h. After 2 hours the rate is changed to 200 mL/h and is not changed again. How many hours t after the start will the bag be empty? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A patient’s temperature is 39.9 °C. Convert it to degrees Fahrenheit T with °F = °C × 9/5 + 32. Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). An infusion delivers 10 mcg/min. Express this dose rate D in mg/h.
Answer: V = 5.2 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 10 mL syringe every small line is 0.2 mL.
Answer: R = 5 mL/h
Dose calculation: the amount to give equals what is prescribed divided by what you have, times the quantity it comes in: amount = (desired dose/stock strength) × stock volume. Always keep the units the same (convert g to mg, mg to mcg first) and check that the answer is sensible.
Answer: R = 14 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
At the bedside you round to the nearest whole drop: 14 gtt/min.
Answer: D = 16 mg/h
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: R = 7.3 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 17.1 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: U = 2.05 mL/kg/h
Intake and output: intake counts everything that goes in (oral fluids, IV infusions, IV medications and flushes, tube feeds); ice chips count as half their volume. Output counts urine, drains, vomit and other losses. Balance = total intake − total output; a negative balance is a net loss. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: t = 6.2 h
Infusion time: time (h) = volume to infuse (mL)/rate (mL/h); use the volume still left in the bag, not the bag size. Volume infused = rate × time. Convert decimal hours to hours and minutes with the fraction × 60 (0.5 h = 30 min, not 50 min). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
That is about 6 h 12 min, so the bag runs out at about 22:42.
Answer: T = 103.8 °F
Temperature: °C = (°F − 32) × 5/9 and °F = °C × 9/5 + 32. Subtract 32 before you multiply when going from °F, and add 32 after you multiply when going from °C. A quick check: 37 °C is 98.6 °F, and every 1 °C is 1.8 °F.
Answer: D = 0.6 mg/h
Dimensional analysis: write the given quantity, then multiply by conversion factors written as fractions (for example 60 min/1 h or 1 mg/1000 mcg) so that each unwanted unit appears once on top and once underneath and cancels. When only the wanted unit is left, calculate. Use the equivalents the question gives and round only the final answer.
This is independent practice material. ExamProblems is not affiliated with or endorsed by the organisation that runs this exam, and the exam name is used only to describe the content. NCLEX®, NCLEX-RN® and NCLEX-PN® are trademarks of the National Council of State Boards of Nursing, Inc. (NCSBN), which is not affiliated with ExamProblems and does not endorse it or vouch for its accuracy.
ExamProblems · examproblems.com/courses/nclex-dosage-calculations