Formula sheets, the key method steps for every topic and 6 practice problems, with full solutions at the back.
Practice exercise (made-up values, not clinical guidance). A bag contains 25 000 units of heparin in 250 mL. The order is 15 units/kg/h for a patient who weighs 79 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
Practice exercise (made-up values, not clinical guidance). A bag contains dobutamine 250 mg in 250 mL. The order is 2.5 mcg/kg/min for a patient who weighs 96 kg. At what rate R do you set the pump, in mL/h? Round to one decimal place.
A dose of 80 mg is needed from a 2% (w/v) solution. What volume V contains this dose?
The prescription is 3750 units of a drug that comes as 5000 units/mL. Draw up the dose in the 1 mL syringe: what volume V do you give?
Infuse 1500 mL over 10 hours with a giving set of 20 gtt/mL. Find the drip rate R in drops per minute.
500 mL was ordered over 12 hours. After 5 hours you find that 350 mL is still in the bag, and the order must still finish on time. By what percentage Δ must the original pump rate be increased?
Answer: R = 11.9 mL/h
Heparin and insulin infusions: concentration = units in the bag/bag volume (units/mL). Pump rate (mL/h) = units per hour/concentration, and units per hour = mL/h × concentration. For a weight-based order, units/h = units/kg/h × weight first. A bolus volume = units needed/vial strength. The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: R = 14.4 mL/h
Titrated drips: first find the concentration in mcg/mL (mg × 1000/mL). For a weight-based order, mcg/min = mcg/kg/min × weight. Then mL/h = mcg/min × 60/concentration. Working backwards, mcg/kg/min = mL/h × concentration/(60 × weight). The numbers are for practice only; at the bedside always follow local protocols and have high-risk doses double-checked.
Answer: V = 4 mL
Solution strengths: a percentage strength is grams per 100 mL, so 1% = 1 g/100 mL = 10 mg/mL. A ratio strength 1:1000 means 1 g in 1000 mL = 1 mg/mL; 1:10 000 is 0.1 mg/mL. For a dilution the amount of drug stays the same: C₁·V₁ = C₂·V₂.
Answer: V = 0.75 mL
Drawing up a dose: volume = (prescribed dose/stock strength) × stock volume. Convert to the same units first, then check that the volume fits the syringe and lands on one of its graduations.
On this 1 mL syringe every small line is 0.01 mL.
Answer: R = 50 gtt/min
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Answer: Δ = 20 %
Infusion rates: a pump is set in mL/h = volume/time in hours. A gravity drip is counted in drops per minute: gtt/min = volume (mL) × drop factor (gtt/mL)/time (min). The drop factor is printed on the tubing package: macrodrip sets deliver 10, 15 or 20 gtt/mL (blood sets often 10 gtt/mL in the US, 15 in the UK) and microdrip sets 60 gtt/mL. Always use the drop factor the question or package gives.
Many hospitals allow such an adjustment up to 25% without a new order; check local policy.
ExamProblems · examproblems.com/courses/pediatric-and-critical-care-dosing