Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 80 km/h sees an obstacle. Her reaction time is 0.8 s, after which the car brakes with a constant deceleration of 5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 80 km/htr = 0.8 sa = −5 m/s²
d = m
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 2.8 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 2.8 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 7.5 m/s and comes to rest after 57 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 7.5 m/sd = 57 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 9 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 0.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 9 kgm2 = 0.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 36 m/s and 35° above the horizontal towards a wall 99 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 36 m/sθ = 35°x = 99 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 15° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 14 m/sθ = 15°h = 25 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 1200 kg car drives up a 4° slope at a constant 36 km/h. Air resistance and rolling resistance together amount to 450 N. Find the power P the wheels must deliver, in kW.
A 2.5 kg block is released from rest at height 1.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.1) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2.5 kgh = 1.5 mL = 4.5 mμ = 0.1k = 2500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 700 kg car moving at 11 m/s runs into a stationary 1800 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 700 kgv1 = 11 m/sm2 = 1800 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
A 1600 kg car runs into a parked 1400 kg car. The wrecks lock together and skid 9.5 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1 m wide sits in the wall of a tank of glycerin, with its top edge 0.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 75 mm to 50 mm. In the wide section the pressure is 210 kPa and the velocity is 3 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 50 mm and a gauge pressure of 150 kPa. The nozzle exit diameter is 20 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².
A heat engine works between a hot reservoir at 725 °C and a cold reservoir at 35 °C. It takes in 2600 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 725 °CTL = 35 °CQH = 2600 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A Carnot heat engine receives 70 kW of heat from a source at 800 °C and rejects heat to the surroundings at 30 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at -20 °C and also rejects heat to the surroundings at 30 °C. Find the rate Q̇L at which heat is removed from the freezer.
TH = 800 °CT0 = 30 °CTL = -20 °CQ̇H = 70 kW
Q̇L = kW
19.Waves, sound & opticsMedium
Light travels in diamond (n = 2.42) towards a flat boundary with acrylic (n = 1.49). Find the critical angle θc beyond which it is totally reflected.
n1 = 2.42n2 = 1.49
θc = °
20.Waves, sound & opticsHard
Light of wavelength 589 nm passes through a single slit 0.12 mm wide. Find the angle θ1 of dark fringe number 1 from the straight-through direction.
λ = 589 nma = 0.12 mmm = 1
θ1 = °
3Solutions
1.Kinematics
Answer: d = 67.16 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 80/3.6 = 22.22 m/s
Reaction distance
d1 = v₀·tr = 22.22·0.8 = 17.78 m
Braking distance
d2 = v₀²/(2a) = 22.22²/(2·5) = 49.38 m
Total
d = 17.78 + 49.38 = 67.16 m
Answer
d = 67.16 m
2.Kinematics
Answer: d = 35.65 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(2.8 − t₁)
4.905·t₁² + 343·t₁ − 960.4 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·960.4))/(2·4.905) = 2.696 s
Depth
d = ½·9.81·2.696² = 35.65 m
Answer
d = 35.65 m
3.Newton’s laws
Answer: μ = 0.0503
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 7.5²/(2·57) = 0.4934 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 0.4934/9.81 = 0.0503
Answer
μ = 0.0503
4.Newton’s laws
Answer: a = 0.5163 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 36·cos 35° = 29.49 m/s
t = x/vx = 99/29.49 = 3.357 s
Height at that time
y = 20.65·3.357 − ½·9.81·3.357² = 14.04 m
Answer
y = 14.04 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: x = 35.93 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 15° = 13.52 m/s
vy = v0·sin θ = 14·sin 15° = 3.623 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 25 + 3.623·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (3.623 + √(13.13 + 490.5))/9.81 = 2.657 s
Horizontal distance
x = vx·t = 13.52·2.657 = 35.93 m
Answer
x = 35.93 m
7.Work & energy
Answer: P = 12.71 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1200·9.81 = 11772 N
mg·sin θ = 11772·sin 4° = 821.2 N
F = 821.2 + 450 = 1271 N
Power
v = 36/3.6 = 10 m/s
P = F·v = 1271·10 = 12712 W = 12.71 kW
Answer
P = 12.71 kW
8.Work & energy
Answer: x = 14.35 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 24.53·(1.5 − 0.1·4.5) = 25.75 J
Maximum compression
½kx² = 25.75 → x = √(2·25.75/2500) = 0.1435 m = 14.35 cm
Answer
x = 14.35 cm
9.Momentum & collisions
Answer: ΔK = 30492 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 700·11/2500 = 3.08 m/s
Kinetic energy before and after
Kbefore = ½·700·11² = 42350 J
Kafter = ½·2500·3.08² = 11858 J
Energy lost
ΔK = 42350 − 11858 = 30492 J
Answer
ΔK = 30492 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: v1 = 18.1 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Exit velocity
β = 20/50 = 0.4
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·150000/(1000·0.9744)) = 17.55 m/s
Height of the jet
Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.
H = v2²/(2g) = 17.55²/(2·9.81) = 15.69 m
Answer
H = 15.69 m
15.Ideal gas law
Answer: V = 82.37 L
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = 270/16.04 = 16.83 mol
T = 80 + 273.15 = 353.1 K
Volume
V = nRT/P = 16.83·8.314·353.1/600 = 82.37 L
Answer
V = 82.37 L
16.Ideal gas law
Answer: ρ = 1.068 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 110 + 273.15 = 383.1 K
Density
ρ = 850·4.003/(8.314·383.1) = 1.068 kg/m³
Answer
ρ = 1.068 kg/m³
17.Heat engines & refrigerators
Answer: Wmax = 1797 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 725 + 273.15 = 998.1 K
TL = 35 + 273.15 = 308.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 308.1/998.1 = 69.13 %
Maximum work
Wmax = ηmax·QH = 0.6913·2600 = 1797 kJ
Answer
Wmax = 1797 kJ
18.Heat engines & refrigerators
Answer: Q̇L = 254.3 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 800 + 273.15 = 1073 K
T0 = 30 + 273.15 = 303.1 K
TL = -20 + 273.15 = 253.1 K
Engine work
η = 1 − 303.1/1073 = 0.7175
Ẇ = 0.7175·70 = 50.23 kW
Heat removed by the refrigerator
COPR = 253.1/(303.1 − 253.1) = 5.063
Q̇L = 5.063·50.23 = 254.3 kW
Answer
Q̇L = 254.3 kW
19.Waves, sound & optics
Answer: θc = 38 °
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Refraction at 90°
sin θc = n₂/n₁ = 1.49/2.42 = 0.6157
Critical angle
θc = arcsin(0.6157) = 38°
Answer
θc = 38°
20.Waves, sound & optics
Answer: θ1 = 0.2812 °
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …