Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 45 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. Find the braking distance s.
v₀ = 45 km/ha = −3.5 m/s²v = 0
s = m
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 1.6 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 1.6 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
Masses of 5 kg and 1 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 5 kgm2 = 1 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
A 4.5 kg block on a ramp at 20° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 7 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 4.5 kgm2 = 7 kgθ = 20°μ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 36 m/s and must land 50 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 36 m/sR = 50 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 29 m/sθ = 35°h = 60 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.1. Find its speed v after it has slid 18 m along the slope.
θ = 25°μ = 0.1d = 18 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 2 kg cart is released from rest at a height of 3.9 m on a smooth track that leads into a vertical circular loop of radius 1.5 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 2 kgh = 3.9 mR = 1.5 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 1600 kg car moving at 23 m/s runs into a stationary 500 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 1600 kgv1 = 23 m/sm2 = 500 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
At a crossing a 1100 kg car travelling east at 18 m/s collides with a 1800 kg car travelling north at 12 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 1100 kgv1 = 18 m/s (E)m2 = 1800 kgv2 = 12 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 1 mH = 3 mb = 2 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 2.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water drains from a large open tank through a sharp-edged orifice with a diameter of 25 mm. The water level is kept 5.5 m above the orifice and the discharge coefficient is 0.63. Find the flow rate Q. Use g = 9.81 m/s².
d = 25 mmh = 5.5 mCd = 0.63g = 9.81 m/s²
Q = L/s
14.Continuity & BernoulliHard
A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 50 mm and a gauge pressure of 110 kPa. The nozzle exit diameter is 20 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².
A reversible refrigerator keeps a cold room at 0 °C by removing 4 kW of heat, and rejects heat to the surroundings at 35 °C. Find the rate Q̇H at which it rejects heat.
TL = 0 °CTH = 35 °CQ̇L = 4 kW
Q̇H = kW
18.Heat engines & refrigeratorsHard
Two Carnot engines work in series. Engine A receives heat from a reservoir at 550 °C and rejects heat to an intermediate reservoir at temperature Tm. Engine B takes all that heat and rejects heat to a reservoir at 40 °C. Both engines produce the same work. Find Tm in °C.
TH = 550 °CTL = 40 °C
Tm = °C
19.Waves, sound & opticsMedium
An object stands 4 cm in front of a thin converging lens with a focal length of 10 cm. Find the image distance di. Use the sign convention 1/f = 1/do + 1/di (f < 0 for a diverging lens, di < 0 for a virtual image).
do = 4 cmf = 10 cm
di = cm
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.5 and a cladding with n₂ = 1.48. Find its numerical aperture NA.
n1 = 1.5n2 = 1.48
NA =
3Solutions
1.Kinematics
Answer: s = 22.32 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 45/3.6 = 12.5 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·3.5) = 22.32 m
Answer
s = 22.32 m
2.Kinematics
Answer: d = 12.01 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(1.6 − t₁)
4.905·t₁² + 343·t₁ − 548.8 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·548.8))/(2·4.905) = 1.565 s
Depth
d = ½·9.81·1.565² = 12.01 m
Answer
d = 12.01 m
3.Newton’s laws
Answer: T = 16.35 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (5 − 1)·9.81/(5 + 1) = 6.54 m/s²
Tension from the lighter mass
T − m2·g = m2·a → T = 1·(9.81 + 6.54) = 16.35 N
Answer
T = 16.35 N
4.Newton’s laws
Answer: T = 41.11 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 68.67 N
m₁·g·sin θ = 15.1 N
μ·m₁·g·cos θ = 8.297 N
Acceleration of the system
a = (68.67 − 15.1 − 8.297)/11.5 = 3.937 m/s²
Tension from the hanging mass
m2·g − T = m2·a → T = 7·(9.81 − 3.937) = 41.11 N
Answer
T = 41.11 N
5.Projectile motion
Answer: θ = 11.12 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·50/36² = 0.3785
Angle
2θ = 22.24° → θ = 11.12°
Answer
θ = 11.12°
The other solution is 90° − θ = 78.88°.
6.Projectile motion
Answer: t = 5.582 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 29·cos 35° = 23.76 m/s
vy = v0·sin θ = 29·sin 35° = 16.63 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 16.63·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (16.63 + √(276.7 + 1177))/9.81 = 5.582 s
Answer
t = 5.582 s
7.Work & energy
Answer: v = 10.83 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·18·(0.4226 − 0.1·0.9063)) = 10.83 m/s
Answer
v = 10.83 m/s
8.Work & energy
Answer: N = 3.924 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(3.9 − 3) = 17.66 m²/s²
Forces at the top
m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·17.66/1.5 − 19.62 = 3.924 N
Answer
N = 3.924 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: ΔK = 100762 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1600·23/2100 = 17.52 m/s
Kinetic energy before and after
Kbefore = ½·1600·23² = 423200 J
Kafter = ½·2100·17.52² = 322438 J
Energy lost
ΔK = 423200 − 322438 = 100762 J
Answer
ΔK = 100762 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: v′ = 10.1 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Ideal jet velocity
√(2gh) = √(2·9.81·5.5) = 10.39 m/s
Actual flow rate
The discharge coefficient accounts for the contraction of the jet and friction at the edge.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Exit velocity
β = 20/50 = 0.4
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·110000/(1000·0.9744)) = 15.03 m/s
Height of the jet
Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.
H = v2²/(2g) = 15.03²/(2·9.81) = 11.51 m
Answer
H = 11.51 m
15.Ideal gas law
Answer: V = 37.13 L
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = 120/16.04 = 7.481 mol
T = 85 + 273.15 = 358.1 K
Volume
V = nRT/P = 7.481·8.314·358.1/600 = 37.13 L
Answer
V = 37.13 L
16.Ideal gas law
Answer: V2 = 1.57 L
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 308.1 K, T2 = 403.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 2·(300/500)·(403.1/308.1) = 1.57 L
Answer
V2 = 1.57 L
17.Heat engines & refrigerators
Answer: Q̇H = 4.513 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 35 + 273.15 = 308.1 K
TL = 0 + 273.15 = 273.1 K
Reversible heat ratio
Q̇H = Q̇L·TH/TL = 4·308.1/273.1 = 4.513 kW
Answer
Q̇H = 4.513 kW
Power input: Ẇ = 0.5125 kW.
18.Heat engines & refrigerators
Answer: Tm = 295 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 550 + 273.15 = 823.1 K
TL = 40 + 273.15 = 313.1 K
Equal work
W = Q·(1 − Tlow/Thigh) and Q/T is the same at every reservoir, so W is proportional to the temperature drop.
Tm = (823.1 + 313.1)/2 = 568.1 K = 295 °C
Answer
Tm = 295 °C
19.Waves, sound & optics
Answer: di = −6.667 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/10 − 1/4
di = −6.667 cm
Ray diagram
virtual, on the same side as the object
Answer
di = −6.667 cm
20.Waves, sound & optics
Answer: NA = 0.2441
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.