Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.5 s10

A driver moving at 36 km/h sees an obstacle. Her reaction time is 0.5 s, after which the car brakes with a constant deceleration of 8 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 36 km/htr = 0.5 sa = −8 m/s²
d = m
2.KinematicsHard
v₀ = 5 m/s40 m

A ball is thrown straight up at 5 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 5 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°a = ?m = 9 kg

A 9 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 9 kgθ = 40°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 9.5 kg4 kgμ = 0.1

A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 9.5 kgm2 = 4 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?35°R = 30 m

A ball is launched from level ground at 35° above the horizontal and lands 30 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 35°R = 30 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 20 mv0​ = 11 m/s30°range

A ball is launched at 30° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 11 m/sθ = 30°h = 20 mg = 9.81 m/s²
t = s
7.Work & energyMedium
20°d = 19 mμ = 0.25

A 0.5 kg block slides 19 m down a slope at 20° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 0.5 kgθ = 20°μ = 0.25d = 19 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
h = 5 mL = 2.5 mμ = 0.3k = 800 N/m

A 2.5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.3) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 5 mL = 2.5 mμ = 0.3k = 800 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
5 kgv = ?8 gh = 25 cm

An 8 g bullet is fired horizontally into a 5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 25 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 5 kgh = 25 cmg = 9.81 m/s²
v = m/s
10.Momentum & collisionsHard
15 m/s18 m/s

A 0.4 kg ball hits a wall at 15 m/s and bounces straight back at 18 m/s. The contact lasts 25 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.4 kgvin = 15 m/svout = 18 m/sΔt = 25 ms
J = N·s
11.Hydrostatic forceMedium
gated = 1.5 mH = 1.5 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1.5 mH = 1.5 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 0.5 mH = 3 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 0.5 mH = 3 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 150 mm, p1​ = 110 kPad2​ = 75 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 150 mm to 75 mm. In the wide section the pressure is 110 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 150 mmd2 = 75 mmp1 = 110 kPav1 = 0.75 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
H = ?d1​ = 50 mmp1​ = 60 kPad2​ = 25 mm

A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 50 mm and a gauge pressure of 60 kPa. The nozzle exit diameter is 25 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².

d1 = 50 mmp1 = 60 kPa (gauge)d2 = 25 mmρ = 1000 kg/m³g = 9.81 m/s²
H = m
15.Ideal gas lawMedium
300 g of CH₄P = 700 kPaT = 20 °CV = ?

What volume V does 300 g of CH₄ occupy at 700 kPa and 20 °C? Treat it as an ideal gas.

m = 300 gM = 16.04 g/molP = 700 kPaT = 20 °CR = 8.314 J/(mol·K)
V = L
16.Ideal gas lawHard
CH₄, M = 16.04 g/molP = 600 kPaT = 80 °Cρ = ?

Find the density ρ of CH₄ at 600 kPa and 80 °C, treating it as an ideal gas.

M = 16.04 g/molP = 600 kPaT = 80 °CR = 8.314 J/(mol·K)
ρ = kg/m³
17.Heat engines & refrigeratorsMedium
TH​ = 675 °CTL​ = ?EQH​ = 3300 kJQL​ = 951 kJW

A reversible (Carnot) heat engine takes in 3300 kJ of heat from a reservoir at 675 °C and rejects 951 kJ per cycle. Find the temperature TL of the cold reservoir in °C.

TH = 675 °CQH = 3300 kJQL = 951 kJ
TL = °C
18.Heat engines & refrigeratorsHard
TH​ = 800 °CTL​ = 25 °CEQH​ = 3800 kJQL​ = 2166 kJW = 1634 kJ

A heat engine takes in 3800 kJ of heat from a reservoir at 800 °C, produces 1634 kJ of work and rejects the rest to a reservoir at 25 °C, per cycle. Find the total entropy generated Sgen per cycle.

TH = 800 °CTL = 25 °CQH = 3800 kJW = 1634 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
L = 0.5 mn = 7

A pipe closed at one end is 0.5 m long. The speed of sound is 343 m/s. Find the frequency f7 of its harmonic number 7.

v = 343 m/sn = 7L = 0.5 m
f7 = Hz
20.Waves, sound & opticsHard
SO25 m/sf = 20 kHz

A sensor at rest sends ultrasound of 20 kHz towards a car that moves away at 25 m/s and mixes the echo with the emitted signal. Find the beat frequency fb (speed of sound 343 m/s).

f = 20 kHzu = 25 m/sv = 343 m/s
fb = Hz

3Solutions

1.Kinematics

Answer: d = 11.25 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 36/3.6 = 10 m/s

Reaction distance

d1 = v₀·tr = 10·0.5 = 5 m

Braking distance

d2 = v₀²/(2a) = 10²/(2·8) = 6.25 m

Total

d = 5 + 6.25 = 11.25 m

Answer

d = 11.25 m
2.Kinematics

Answer: t = 3.41 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 5·t − ½·9.81·t²
4.905·t² − 5·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (5 + √(5² + 2·9.81·40))/9.81 = 3.41 s

Answer

t = 3.41 s
3.Newton’s laws

Answer: a = 5.179 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 40° − 0.15·cos 40°) = 9.81·(0.6428 − 0.1149) = 5.179 m/s²

Answer

a = 5.179 m/s²
4.Newton’s laws

Answer: a = 2.216 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (39.24 − 9.32)/13.5 = 2.216 m/s²

Answer

a = 2.216 m/s²
5.Projectile motion

Answer: v0 = 17.7 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·30/sin 70°) = 17.7 m/s

Answer

v0 = 17.7 m/s
6.Projectile motion

Answer: t = 2.656 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 11·cos 30° = 9.526 m/s
vy = v0·sin θ = 11·sin 30° = 5.5 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 5.5·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (5.5 + √(30.25 + 392.4))/9.81 = 2.656 s

Answer

t = 2.656 s
7.Work & energy

Answer: Wf = 21.89 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 4.905·0.9397 = 4.609 N
F = μN = 0.25·4.609 = 1.152 N

Work against friction

Wf = F·d = 1.152·19 = 21.89 J

Answer

Wf = 21.89 J
8.Work & energy

Answer: x = 51.05 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(5 − 0.3·2.5) = 104.2 J

Maximum compression

½kx² = 104.2 → x = √(2·104.2/800) = 0.5105 m = 51.05 cm

Answer

x = 51.05 cm
9.Momentum & collisions

Answer: v = 1386 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.25) = 2.215 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 5)·2.215/0.008 = 1386 m/s

Answer

v = 1386 m/s
10.Momentum & collisions

Answer: J = 13.2 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(18 + 15) = 13.2 N·s

Answer

J = 13.2 N·s
11.Hydrostatic force

Answer: F = 33.11 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1.5 + 1.5/2 = 2.25 m
A = H·b = 1.5·1 = 1.5 m²
gated = 1.5 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2.25·1.5 = 33.11 kN

Answer

F = 33.11 kN
12.Hydrostatic force

Answer: F = 176.6 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 0.5 + 3/2 = 2 m
A = H·b = 3·3 = 9 m²
gated = 0.5 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2·9 = 176.6 kN

Answer

F = 176.6 kN
13.Continuity & Bernoulli

Answer: p2 = 105.8 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.75·(150/75)² = 3 m/s
½ρ(v1² − v2²) = ½·1000·(0.75² − 3²)/1000 = −4.219 kPa
p2 = p1 + ½ρ(v1² − v2²) = 110 + (−4.219) = 105.8 kPa

Answer

p2 = 105.8 kPa
14.Continuity & Bernoulli

Answer: H = 6.524 m

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Exit velocity

β = 25/50 = 0.5
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·60000/(1000·0.9375)) = 11.31 m/s

Height of the jet

Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.

H = v2²/(2g) = 11.31²/(2·9.81) = 6.524 m

Answer

H = 6.524 m
15.Ideal gas law

Answer: V = 65.12 L

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = 300/16.04 = 18.7 mol
T = 20 + 273.15 = 293.1 K

Volume

V = nRT/P = 18.7·8.314·293.1/700 = 65.12 L

Answer

V = 65.12 L
16.Ideal gas law

Answer: ρ = 3.278 kg/m³

Ideal gas density: ρ = PM/(RT).

Rearrange the gas law

PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 80 + 273.15 = 353.1 K

Density

ρ = 600·16.04/(8.314·353.1) = 3.278 kg/m³

Answer

ρ = 3.278 kg/m³
17.Heat engines & refrigerators

Answer: TL = 0.08959 °C

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperature of the source

TH = 675 + 273.15 = 948.1 K

Reversible heat ratio

TL = TH·QL/QH = 948.1·951/3300 = 273.2 K = 0.08959 °C

Answer

TL = 0.08959 °C
18.Heat engines & refrigerators

Answer: Sgen = 3.724 kJ/K

Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.

Heat rejected

QL = QH − W = 3800 − 1634 = 2166 kJ

Absolute temperatures

TH = 800 + 273.15 = 1073 K
TL = 25 + 273.15 = 298.1 K

Entropy changes of the reservoirs

ΔSH = −3800/1073 = −3.541 kJ/K
ΔSL = 2166/298.1 = 7.265 kJ/K
Sgen = 7.265 − 3.541 = 3.724 kJ/K

Answer

Sgen = 3.724 kJ/K

Sgen > 0, so the engine is possible but irreversible.

19.Waves, sound & optics

Answer: f7 = 1201 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Wavelength of this mode

λ = 4L/n = 4·0.5/7 = 0.2857 m

Frequency

f = v/λ = 343/0.2857 = 1201 Hz

Answer

f7 = 1201 Hz
20.Waves, sound & optics

Answer: fb = 2717 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 20000·(343 − 25)/343 = 18542 Hz

Frequency of the echo

f″ = f′·343/(343 + 25) = 17283 Hz

Beat frequency

fb = |f″ − f| = 2717 Hz

Answer

fb = 2717 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers