Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 29 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4.5 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 29 m/sapolice = 4.5 m/s²v0,police = 0
d = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 34 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 34 m/s²t1 = 1.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 7.5 m/s and comes to rest after 9.6 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 7.5 m/sd = 9.6 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 9.5 kgm2 = 2.5 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 55° above the horizontal and lands 30 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 55°R = 30 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 18 m/s and 40° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 18 m/sθ = 40°h = 45 mg = 9.81 m/s²
H = m
7.Work & energyMedium
A 1800 kg car drives up a 4° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 800 N. Find the power P the wheels must deliver, in kW.
A 0.5 kg cart is released from rest at a height of 22.5 m on a smooth track that leads into a vertical circular loop of radius 5 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 0.5 kgh = 22.5 mR = 5 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 1.5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 1.5 kgm2 = 2.5 kgv1 = 2 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 1000 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 21 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 3 m wide sits in the wall of a tank of glycerin, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
Water drains from a large open tank through a sharp-edged orifice with a diameter of 50 mm. The water level is kept 4 m above the orifice and the discharge coefficient is 0.61. Find the flow rate Q. Use g = 9.81 m/s².
d = 50 mmh = 4 mCd = 0.61g = 9.81 m/s²
Q = L/s
14.Continuity & BernoulliHard
Water flows up through a pipe that narrows from 150 mm to 75 mm while rising 5 m. At section 1 the pressure is 180 kPa and the velocity is 2.5 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 250 °C and a cold reservoir at 10 °C. Find the highest possible thermal efficiency ηmax.
TH = 250 °CTL = 10 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat engine takes in 1900 kJ of heat from a reservoir at 650 °C, produces 627 kJ of work and rejects the rest to a reservoir at 35 °C, per cycle. Find the total entropy generated Sgen per cycle.
TH = 650 °CTL = 35 °CQH = 1900 kJW = 627 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
An object 1 cm tall stands 6 cm in front of a thin diverging lens with a focal length of 20 cm. Find the image height hi (negative for an inverted image).
ho = 1 cmdo = 6 cmf = −20 cm
hi = cm
20.Waves, sound & opticsHard
Light of wavelength 600 nm falls on two slits 0.2 mm apart. The screen is 1 m away. Find the distance y4 from the central bright fringe to bright fringe number 4.
λ = 600 nmd = 0.2 mmL = 1 mm = 4
y4 = mm
3Solutions
1.Kinematics
Answer: d = 373.8 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·29/4.5 = 12.89 s
Distance
d = v·t = 29·12.89 = 373.8 m
Answer
d = 373.8 m
At that moment the police car moves at 2v = 58 m/s.
2.Kinematics
Answer: hmax = 170.8 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 34·1.5 = 51 m/s
h₁ = ½·34·1.5² = 38.25 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 51²/(2·9.81) = 132.6 m
hmax = 38.25 + 132.6 = 170.8 m
Answer
hmax = 170.8 m
3.Newton’s laws
Answer: μ = 0.2986
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 7.5²/(2·9.6) = 2.93 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 2.93/9.81 = 0.2986
Answer
μ = 0.2986
4.Newton’s laws
Answer: a = 1.267 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·30/sin 110°) = 17.7 m/s
Answer
v0 = 17.7 m/s
6.Projectile motion
Answer: H = 51.82 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 18·sin 40° = 11.57 m/s
Rise above the cliff
Δh = vy²/(2g) = 11.57²/(2·9.81) = 6.823 m
Height above the ground
H = 45 + 6.823 = 51.82 m
Answer
H = 51.82 m
7.Work & energy
Answer: P = 50.79 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 4° = 1232 N
F = 1232 + 800 = 2032 N
Power
v = 90/3.6 = 25 m/s
P = F·v = 2032·25 = 50794 W = 50.79 kW
Answer
P = 50.79 kW
8.Work & energy
Answer: N = 19.62 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′1 = −0.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1.5 − 2.5)/(1.5 + 2.5)·2 = −0.5 m/s
v′2 = 2·1.5/(1.5 + 2.5)·2 = 1.5 m/s
Answer
v′1 = −0.5 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: v1 = 43.95 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 0.5 + 3/2 = 2 m
A = H·b = 3·2 = 6 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2·6 = 117.7 kN
Answer
F = 117.7 kN
12.Hydrostatic force
Answer: F = 394 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 2.5/2 = 4.25 m
A = H·b = 2.5·3 = 7.5 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·4.25·7.5 = 394 kN
Answer
F = 394 kN
13.Continuity & Bernoulli
Answer: Q = 10.61 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Ideal jet velocity
√(2gh) = √(2·9.81·4) = 8.859 m/s
Actual flow rate
The discharge coefficient accounts for the contraction of the jet and friction at the edge.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 298.1 K, T2 = 453.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 2·(250/250)·(453.1/298.1) = 3.04 L
Answer
V2 = 3.04 L
17.Heat engines & refrigerators
Answer: ηmax = 45.88 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 250 + 273.15 = 523.1 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/523.1 = 45.88 %
Answer
ηmax = 45.88 %
18.Heat engines & refrigerators
Answer: Sgen = 2.073 kJ/K
Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.
Heat rejected
QL = QH − W = 1900 − 627 = 1273 kJ
Absolute temperatures
TH = 650 + 273.15 = 923.1 K
TL = 35 + 273.15 = 308.1 K
Entropy changes of the reservoirs
ΔSH = −1900/923.1 = −2.058 kJ/K
ΔSL = 1273/308.1 = 4.131 kJ/K
Sgen = 4.131 − 2.058 = 2.073 kJ/K
Answer
Sgen = 2.073 kJ/K
Sgen > 0, so the engine is possible but irreversible.
19.Waves, sound & optics
Answer: hi = 0.7692 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/(−20) − 1/6
di = −4.615 cm
Magnification and height
m = −(−4.615)/6 = 0.7692
hi = 0.7692·1 = 0.7692 cm
Answer
hi = 0.7692 cm
20.Waves, sound & optics
Answer: y4 = 12 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …