Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A plane needs a speed of 250 km/h to take off and the usable runway is 2400 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 250 km/hs = 2400 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 10 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 10 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
Masses of 6 kg and 2 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the acceleration a of the masses.
m1 = 6 kgm2 = 2 kgg = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 140 N pulls the front 2 kg block; the 1 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 1 kgm2 = 2 kgF = 140 Nμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 16 m/sθ = 70°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 25 m/s and 45° above the horizontal from the top of a 50 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 25 m/sθ = 45°h = 50 mg = 9.81 m/s²
H = m
7.Work & energyMedium
A car travelling at 30 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.4. Find the stopping distance d.
v = 30 km/hμ = 0.4g = 9.81 m/s²
d = m
8.Work & energyHard
A 2 kg cart is released from rest at a height of 8 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 2 kgh = 8 mR = 2 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 2.5 kg glider moving at 10 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 2.5 kgm2 = 0.5 kgv1 = 10 m/sv2 = 0
v′2 = m/s
10.Momentum & collisionsHard
A 0.35 kg ball hits a wall at 23 m/s and bounces straight back at 5 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.
m = 0.35 kgvin = 23 m/svout = 5 m/sΔt = 40 ms
Favg = N
11.Hydrostatic forceMedium
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal pipe that narrows from 200 mm to 100 mm. In the wide section the pressure is 230 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A horizontal venturi meter (inlet 150 mm, throat 100 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 100 mm. The discharge coefficient is 0.99. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².
A heat engine works between a hot reservoir at 775 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.
TH = 775 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 2 °C in a kitchen at 35 °C, removing heat from the cold space at 1 kW. Find the minimum power input Ẇmin.
TH = 35 °CTL = 2 °CQ̇L = 1 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
A pipe closed at one end is 1 m long. The speed of sound is 343 m/s. Find the frequency f1 of its fundamental (first harmonic).
v = 343 m/sn = 1L = 1 m
f1 = Hz
20.Waves, sound & opticsHard
A parking sensor at rest sends ultrasound of 40 kHz towards a car that approaches at 10 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).
f = 40 kHzu = 10 m/sv = 343 m/s
f″ = Hz
3Solutions
1.Kinematics
Answer: a = 1.005 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 250/3.6 = 69.44 m/s
Acceleration
a = v²/(2s) = 69.44²/(2·2400) = 1.005 m/s²
Answer
a = 1.005 m/s²
2.Kinematics
Answer: t = 3.694 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−30 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 30 = 0
Solve the quadratic
Only the positive root is physical.
t = (10 + √(10² + 2·9.81·30))/9.81 = 3.694 s
Answer
t = 3.694 s
3.Newton’s laws
Answer: a = 4.905 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (6 − 2)·9.81/(6 + 2) = 4.905 m/s²
Answer
a = 4.905 m/s²
4.Newton’s laws
Answer: a = 44.7 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 16·cos 70° = 5.472 m/s
vy = v0·sin θ = 16·sin 70° = 15.04 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·15.04/9.81 = 3.065 s
Horizontal distance
x = vx·t = 5.472·3.065 = 16.77 m
Answer
x = 16.77 m
6.Projectile motion
Answer: H = 65.93 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 25·sin 45° = 17.68 m/s
Rise above the cliff
Δh = vy²/(2g) = 17.68²/(2·9.81) = 15.93 m
Height above the ground
H = 50 + 15.93 = 65.93 m
Answer
H = 65.93 m
7.Work & energy
Answer: d = 8.849 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Speed in base units
v = 30/3.6 = 8.333 m/s
Energy balance
½mv² = μmg·d → d = v²/(2μg) = 8.333²/(2·0.4·9.81) = 8.849 m
Answer
d = 8.849 m
Doubling the speed makes the stopping distance four times longer.
8.Work & energy
Answer: N = 58.86 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(8 − 4) = 78.48 m²/s²
Forces at the top
m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·78.48/2 − 19.62 = 58.86 N
Answer
N = 58.86 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′2 = 16.67 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2.5 − 0.5)/(2.5 + 0.5)·10 = 6.667 m/s
v′2 = 2·2.5/(2.5 + 0.5)·10 = 16.67 m/s
Answer
v′2 = 16.67 m/s
10.Momentum & collisions
Answer: Favg = 245 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.35·(5 + 23) = 9.8 N·s
Average force
Favg = J/Δt = 9.8/0.04 = 245 N
Answer
Favg = 245 N
11.Hydrostatic force
Answer: F = 128.8 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 4 + 2.5/2 = 5.25 m
A = H·b = 2.5·1 = 2.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·5.25·2.5 = 128.8 kN
Answer
F = 128.8 kN
12.Hydrostatic force
Answer: F = 198.7 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 3/2 = 4.5 m
A = H·b = 3·1.5 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.5·4.5 = 198.7 kN
Answer
F = 198.7 kN
13.Continuity & Bernoulli
Answer: p2 = 218.3 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Pressure difference from the manometer
Δp = (13600 − 1000)·9.81·0.1 = 12361 Pa
Throat velocity
Continuity and Bernoulli together give the ideal throat velocity.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 775 + 273.15 = 1048 K
TL = 40 + 273.15 = 313.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 313.1/1048 = 70.12 %
Answer
ηmax = 70.12 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.1199 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 1/8.338 = 0.1199 kW
Answer
Ẇmin = 0.1199 kW
19.Waves, sound & optics
Answer: f1 = 85.75 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 4L/n = 4·1/1 = 4 m
Frequency
f = v/λ = 343/4 = 85.75 Hz
Answer
f1 = 85.75 Hz
20.Waves, sound & optics
Answer: f″ = 42402 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.