Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 29 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2 m/s². How long does it take the police car to catch up? Find t.
vcar = 29 m/sapolice = 2 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 12 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 12 m/sh₀ = 40 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 15 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 15 kgθ = 45°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 150 N pulls the front 5 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 4 kgm2 = 5 kgF = 150 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 35° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 14 m/sθ = 35°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 40° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 18 m/sθ = 40°h = 35 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A 1800 kg car drives up a 4° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 250 N. Find the power P the wheels must deliver, in kW.
A 0.5 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.2) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 0.5 kgh = 4.5 mL = 2 mμ = 0.2k = 4000 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 700 kg car moving at 13 m/s runs into a stationary 1900 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 700 kgv1 = 13 m/sm2 = 1900 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
At a crossing a 2000 kg car travelling east at 12 m/s collides with a 1000 kg car travelling north at 13 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 2000 kgv1 = 12 m/s (E)m2 = 1000 kgv2 = 13 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1 m wide sits in the wall of a tank of glycerin, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 3 mH = 1 mb = 1 mρ = 1260 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
Water flows through a horizontal pipe that narrows from 100 mm to 75 mm. In the wide section the pressure is 160 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 150 mm to 50 mm while rising 7 m. At section 1 the pressure is 250 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 700 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.
TH = 700 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat engine takes in 4300 kJ of heat from a reservoir at 350 °C, produces 1075 kJ of work and rejects the rest to a reservoir at 40 °C, per cycle. Find the total entropy generated Sgen per cycle.
TH = 350 °CTL = 40 °CQH = 4300 kJW = 1075 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
Light inside a transparent block is totally reflected at the boundary with ethanol (n = 1.36) for every angle of incidence above 30°. Find the refractive index n1 of the block.
θc = 30°n2 = 1.36
n1 =
20.Waves, sound & opticsHard
A grating with 800 lines per millimetre shows the order-1 maximum of a spectral line at 22.9° from the straight-through direction. Find the wavelength λ of the line.
N = 800 mm⁻¹θ1 = 22.9°m = 1
λ = nm
3Solutions
1.Kinematics
Answer: t = 29 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·29/2 = 29 s
Answer
t = 29 s
At that moment the police car moves at 2v = 58 m/s.
2.Kinematics
Answer: hmax = 47.34 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 12²/(2·9.81) = 7.339 m
Height above the ground
hmax = 40 + 7.339 = 47.34 m
Answer
hmax = 47.34 m
3.Newton’s laws
Answer: a = 5.896 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: x = 18.77 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 35° = 11.47 m/s
vy = v0·sin θ = 14·sin 35° = 8.03 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·8.03/9.81 = 1.637 s
Horizontal distance
x = vx·t = 11.47·1.637 = 18.77 m
Answer
x = 18.77 m
6.Projectile motion
Answer: t = 4.099 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 18·cos 40° = 13.79 m/s
vy = v0·sin θ = 18·sin 40° = 11.57 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 35 + 11.57·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (11.57 + √(133.9 + 686.7))/9.81 = 4.099 s
Answer
t = 4.099 s
7.Work & energy
Answer: P = 22.23 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 4° = 1232 N
F = 1232 + 250 = 1482 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1482·15 = 22226 W = 22.23 kW
Answer
P = 22.23 kW
8.Work & energy
Answer: v = 8.969 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(4.5 − 0.2·2) = 20.11 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·4.1) = 8.969 m/s
Answer
v = 8.969 m/s
9.Momentum & collisions
Answer: ΔK = 43225 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 700·13/2600 = 3.5 m/s
Kinetic energy before and after
Kbefore = ½·700·13² = 59150 J
Kafter = ½·2600·3.5² = 15925 J
Energy lost
ΔK = 59150 − 15925 = 43225 J
Answer
ΔK = 43225 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: v′ = 9.098 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 3/2 = 4 m
A = H·b = 3·3 = 9 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4·9 = 353.2 kN
Answer
F = 353.2 kN
12.Hydrostatic force
Answer: F = 43.26 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 1/2 = 3.5 m
A = H·b = 1·1 = 1 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·3.5·1 = 43.26 kN
Answer
F = 43.26 kN
13.Continuity & Bernoulli
Answer: p2 = 159.7 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 293.1 K, T2 = 393.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 20·(100/700)·(393.1/293.1) = 3.832 L
Answer
V2 = 3.832 L
17.Heat engines & refrigerators
Answer: ηmax = 67.82 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 700 + 273.15 = 973.1 K
TL = 40 + 273.15 = 313.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 313.1/973.1 = 67.82 %
Answer
ηmax = 67.82 %
18.Heat engines & refrigerators
Answer: Sgen = 3.398 kJ/K
Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.
Heat rejected
QL = QH − W = 4300 − 1075 = 3225 kJ
Absolute temperatures
TH = 350 + 273.15 = 623.1 K
TL = 40 + 273.15 = 313.1 K
Entropy changes of the reservoirs
ΔSH = −4300/623.1 = −6.9 kJ/K
ΔSL = 3225/313.1 = 10.3 kJ/K
Sgen = 10.3 − 6.9 = 3.398 kJ/K
Answer
Sgen = 3.398 kJ/K
Sgen > 0, so the engine is possible but irreversible.
19.Waves, sound & optics
Answer: n1 = 2.72
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Refractive index of the block
n₁ = n₂/sin θc = 1.36/0.5 = 2.72
Answer
n1 = 2.72
20.Waves, sound & optics
Answer: λ = 486.4 nm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …