Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 54 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.
v₀ = 54 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 10 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 10 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 5 kg box is pushed up a ramp at 20° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the pushing force F.
m = 5 kgθ = 20°μ = 0.15g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 1 kgm2 = 2 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 18 m/s and 20° above the horizontal towards a wall 8 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 18 m/sθ = 20°x = 8 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 40° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 31 m/sθ = 40°h = 20 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A 1800 kg car drives up an 8° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 700 N. Find the power P the wheels must deliver, in kW.
A 4 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.3) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 4 kgh = 3 mL = 1.5 mμ = 0.3k = 5000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 5 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 5 kgm2 = 2 kgv1 = 9 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 20 g bullet is fired horizontally into a 5 kg block hanging from light strings 1.7 m long, and stays in it. The strings swing out to a largest angle of 40° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 20 gM = 5 kgL = 1.7 mθ = 40°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal pipe that narrows from 200 mm to 50 mm. In the wide section the pressure is 210 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A closed water tank has compressed air above the water at a gauge pressure of 90 kPa. Water leaves through an opening with a diameter of 40 mm, 2 m below the water surface, into the open air. Ignoring losses, find the jet velocity v. Use g = 9.81 m/s².
A heat engine works between a hot reservoir at 750 °C and a cold reservoir at 10 °C. It takes in 4900 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 750 °CTL = 10 °CQH = 4900 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A heat pump delivers 11.5 kW of heat to a heating system at 21 °C, taking heat from a source at -5 °C. Its actual COP is 40% of the Carnot COP between these temperatures. Find the electrical power Ẇ it uses.
TH = 21 °CTL = -5 °CηII = 40%Q̇H = 11.5 kW
Ẇ = kW
19.Waves, sound & opticsMedium
A pipe closed at one end must have its harmonic number 3 at 257 Hz. The speed of sound is 343 m/s. Find the length L of the pipe.
v = 343 m/sn = 3f3 = 257 Hz
L = m
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.5 and a cladding with n₂ = 1.4. Find its numerical aperture NA.
n1 = 1.5n2 = 1.4
NA =
3Solutions
1.Kinematics
Answer: s = 22.5 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 54/3.6 = 15 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 15²/(2·5) = 22.5 m
Answer
s = 22.5 m
2.Kinematics
Answer: t = 3.044 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−15 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 15 = 0
Solve the quadratic
Only the positive root is physical.
t = (10 + √(10² + 2·9.81·15))/9.81 = 3.044 s
Answer
t = 3.044 s
3.Newton’s laws
Answer: F = 23.69 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 16.78 + 6.914 = 23.69 N
Answer
F = 23.69 N
4.Newton’s laws
Answer: a = 6.213 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 18·cos 20° = 16.91 m/s
t = x/vx = 8/16.91 = 0.473 s
Height at that time
y = 6.156·0.473 − ½·9.81·0.473² = 1.815 m
Answer
y = 1.815 m
The ball is still rising at the wall.
6.Projectile motion
Answer: t = 4.895 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 31·cos 40° = 23.75 m/s
vy = v0·sin θ = 31·sin 40° = 19.93 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 19.93·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (19.93 + √(397.1 + 392.4))/9.81 = 4.895 s
Answer
t = 4.895 s
7.Work & energy
Answer: P = 47.36 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 8° = 2458 N
F = 2458 + 700 = 3158 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 3158·15 = 47363 W = 47.36 kW
Answer
P = 47.36 kW
8.Work & energy
Answer: x = 20.01 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 39.24·(3 − 0.3·1.5) = 100.1 J
Maximum compression
½kx² = 100.1 → x = √(2·100.1/5000) = 0.2001 m = 20.01 cm
Answer
x = 20.01 cm
9.Momentum & collisions
Answer: v′1 = 3.857 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (5 − 2)/(5 + 2)·9 = 3.857 m/s
v′2 = 2·5/(5 + 2)·9 = 12.86 m/s
Answer
v′1 = 3.857 m/s
10.Momentum & collisions
Answer: v = 701.2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.7·(1 − cos 40°) = 0.3977 m
Speed after impact
V = √(2·9.81·0.3977) = 2.793 m/s
Collision
v = (m + M)·V/m = 5.02·2.793/0.02 = 701.2 m/s
Answer
v = 701.2 m/s
11.Hydrostatic force
Answer: F = 58.86 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1/2 = 3 m
A = H·b = 1·2 = 2 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3·2 = 58.86 kN
Answer
F = 58.86 kN
12.Hydrostatic force
Answer: F = 66.22 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 4 + 1/2 = 4.5 m
A = H·b = 1·1.5 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.5·1.5 = 66.22 kN
Answer
F = 66.22 kN
13.Continuity & Bernoulli
Answer: p2 = 178.1 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Bernoulli from the surface to the jet
v = √(2·(90000/1000 + 9.81·2)) = 14.81 m/s
Answer
v = 14.81 m/s
15.Ideal gas law
Answer: P = 381.4 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 190/28.01 = 6.783 mol
T = 65 + 273.15 = 338.1 K
Pressure
P = nRT/V = 6.783·8.314·338.1/0.05 = 381.4 kPa
Answer
P = 381.4 kPa
16.Ideal gas law
Answer: ρ = 0.754 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 110 + 273.15 = 383.1 K
Density
ρ = 600·4.003/(8.314·383.1) = 0.754 kg/m³
Answer
ρ = 0.754 kg/m³
17.Heat engines & refrigerators
Answer: Wmax = 3544 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 750 + 273.15 = 1023 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/1023 = 72.33 %
Maximum work
Wmax = ηmax·QH = 0.7233·4900 = 3544 kJ
Answer
Wmax = 3544 kJ
18.Heat engines & refrigerators
Answer: Ẇ = 2.541 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 21 + 273.15 = 294.1 K
TL = -5 + 273.15 = 268.1 K
Carnot and actual COP
COPmax = 294.1/(294.1 − 268.1) = 11.31
COP = 0.4·11.31 = 4.525
Power input
Ẇ = Q̇H/COP = 11.5/4.525 = 2.541 kW
Answer
Ẇ = 2.541 kW
19.Waves, sound & optics
Answer: L = 1.001 m
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength
λ = v/f = 343/257 = 1.335 m
Length
L = nλ/4 = 3·1.335/4 = 1.001 m
Answer
L = 1.001 m
20.Waves, sound & optics
Answer: NA = 0.5385
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.