Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?20

A car driving at 72 km/h brakes with a constant deceleration of 4 m/s² until it stops. How long does braking take? Find t.

v₀ = 72 km/ha = −4 m/s²v = 0
t = s
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 4.1 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 4.1 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 45°a = ?m = 19 kg

A 19 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 19 kgθ = 45°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 5.5 kg9.5 kgθ = 25°

A 5.5 kg block on a ramp at 25° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 9.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.2. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 5.5 kgm2 = 9.5 kgθ = 25°μ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 32 m/sθ = ?R = 75 m

A ball is launched from level ground at 32 m/s and must land 75 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 32 m/sR = 75 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 20 mv0​ = 26 m/s55°H = ?

A ball is launched at 26 m/s and 55° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 26 m/sθ = 55°h = 20 mg = 9.81 m/s²
H = m
7.Work & energyMedium
15°d = 14 mμ = 0.15

A block slides from rest down a slope at 15° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 14 m along the slope.

θ = 15°μ = 0.15d = 14 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
h = 5 mL = 1 mμ = 0.1k = 5000 N/m

A 0.5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1 m long (μ = 0.1) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 5 mL = 1 mμ = 0.1k = 5000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
1 kg4 m/s2.5 kg

A 1 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 1 kgm2 = 2.5 kgv1 = 4 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
23 m/s8 m/s

A 0.55 kg ball hits a wall at 23 m/s and bounces straight back at 8 m/s. The contact lasts 25 ms. Find the average force Favg of the wall on the ball.

m = 0.55 kgvin = 23 m/svout = 8 m/sΔt = 25 ms
Favg = N
11.Hydrostatic forceMedium
gated = 1 mH = 1 m

A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 1 mb = 1.5 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 1 mH = 1 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 1 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
v = ?p0​pp0​ − p = 200 Pastagnation point

A pitot-static tube in a wind tunnel reads a difference of 200 Pa between the stagnation pressure and the static pressure. The air density is 1.2 kg/m³. Find the air speed v.

p0 − p = 200 Paρ = 1.2 kg/m³
v = m/s
14.Continuity & BernoulliHard
C212.5 m3 md = 20 mmQ = ?

A hose with an inner diameter of 20 mm siphons water from an open tank. The highest point C of the hose is 2.5 m above the water surface, and the outlet (open to the air) is 3 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the flow rate Q.

d = 20 mmzC = +2.5 mz2 = −3 mg = 9.81 m/s²
Q = L/s
15.Ideal gas lawMedium
470 g of ArP = 250 kPaT = 35 °CV = ?

What volume V does 470 g of Ar occupy at 250 kPa and 35 °C? Treat it as an ideal gas.

m = 470 gM = 39.95 g/molP = 250 kPaT = 35 °CR = 8.314 J/(mol·K)
V = L
16.Ideal gas lawHard
State 1State 2

A fixed amount of He goes from 300 kPa, 10 L, 35 °C to 100 kPa and 50 °C. Find the new volume V2.

P1 = 300 kPaV1 = 10 LT1 = 35 °CP2 = 100 kPaT2 = 50 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 700 °CTL​ = 35 °CEQH​QL​η = 48%

A heat engine receives heat from a source at 700 °C and rejects heat to the surroundings at 35 °C. Its actual thermal efficiency is 48%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.

TH = 700 °CTL = 35 °Cη = 48%
ηII = %
18.Heat engines & refrigeratorsHard
TH​ = 21 °CTL​ = -10 °CHPQ̇H​ = 9 kWQ̇L​Ẇ = ?

A heat pump keeps a house at 21 °C while it is -10 °C outside, delivering 9 kW of heat to the house. Find the minimum power input Ẇmin.

TH = 21 °CTL = -10 °CQ̇H = 9 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
Pβ = ?r = 20 m

A small loudspeaker radiates 0.01 W of sound power equally in all directions. Find the sound intensity level β at 20 m.

P = 0.01 Wr = 20 mI0 = 10⁻¹² W/m²
β = dB
20.Waves, sound & opticsHard
SO15 m/sf = 30 kHz

A parking sensor at rest sends ultrasound of 30 kHz towards a car that moves away at 15 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).

f = 30 kHzu = 15 m/sv = 343 m/s
f″ = Hz

3Solutions

1.Kinematics

Answer: t = 5 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 72/3.6 = 20 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 20/4 = 5 s

Answer

t = 5 s
2.Kinematics

Answer: d = 74 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(4.1 − t₁)
4.905·t₁² + 343·t₁ − 1406 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1406))/(2·4.905) = 3.884 s

Depth

d = ½·9.81·3.884² = 74 m

Answer

d = 74 m
3.Newton’s laws

Answer: a = 4.856 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 45° − 0.3·cos 45°) = 9.81·(0.7071 − 0.2121) = 4.856 m/s²

Answer

a = 4.856 m/s²
4.Newton’s laws

Answer: T = 54.81 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the string

m₂·g = 93.2 N
m₁·g·sin θ = 22.8 N
μ·m₁·g·cos θ = 9.78 N

Acceleration of the system

a = (93.2 − 22.8 − 9.78)/15 = 4.041 m/s²

Tension from the hanging mass

m2·g − T = m2·a → T = 9.5·(9.81 − 4.041) = 54.81 N

Answer

T = 54.81 N
5.Projectile motion

Answer: θ = 22.97 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·75/32² = 0.7185

Angle

2θ = 45.93° → θ = 22.97°

Answer

θ = 22.97°

The other solution is 90° − θ = 67.03°.

6.Projectile motion

Answer: H = 43.12 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 26·sin 55° = 21.3 m/s

Rise above the cliff

Δh = vy²/(2g) = 21.3²/(2·9.81) = 23.12 m

Height above the ground

H = 20 + 23.12 = 43.12 m

Answer

H = 43.12 m
7.Work & energy

Answer: v = 5.594 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·14·(0.2588 − 0.15·0.9659)) = 5.594 m/s

Answer

v = 5.594 m/s
8.Work & energy

Answer: x = 9.805 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(5 − 0.1·1) = 24.03 J

Maximum compression

½kx² = 24.03 → x = √(2·24.03/5000) = 0.09805 m = 9.805 cm

Answer

x = 9.805 cm
9.Momentum & collisions

Answer: v′1 = −1.714 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (1 − 2.5)/(1 + 2.5)·4 = −1.714 m/s
v′2 = 2·1/(1 + 2.5)·4 = 2.286 m/s

Answer

v′1 = −1.714 m/s

The minus sign means the first glider bounces back.

10.Momentum & collisions

Answer: Favg = 682 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(8 + 23) = 17.05 N·s

Average force

Favg = J/Δt = 17.05/0.025 = 682 N

Answer

Favg = 682 N
11.Hydrostatic force

Answer: F = 22.07 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 1/2 = 1.5 m
A = H·b = 1·1.5 = 1.5 m²
gated = 1 mH = 1 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·1.5·1.5 = 22.07 kN

Answer

F = 22.07 kN
12.Hydrostatic force

Answer: F = 44.15 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 1/2 = 1.5 m
A = H·b = 1·3 = 3 m²
gated = 1 mH = 1 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·1.5·3 = 44.15 kN

Answer

F = 44.15 kN
13.Continuity & Bernoulli

Answer: v = 18.26 m/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Bernoulli to the stagnation point

The flow comes to rest at the tip, so its kinetic energy shows up as extra pressure.

p0 − p = ½ρv²
v = √(2·200/1.2) = 18.26 m/s

Answer

v = 18.26 m/s
14.Continuity & Bernoulli

Answer: Q = 2.41 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Velocity in the hose

Surface and outlet are both open to the air, so the pressure terms cancel.

v = √(2g·3) = √(2·9.81·3) = 7.672 m/s

Flow rate

Q = A·v = 0.0003142·7.672 = 0.00241 m³/s = 2.41 L/s

Answer

Q = 2.41 L/s
15.Ideal gas law

Answer: V = 120.6 L

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = 470/39.95 = 11.76 mol
T = 35 + 273.15 = 308.1 K

Volume

V = nRT/P = 11.76·8.314·308.1/250 = 120.6 L

Answer

V = 120.6 L
16.Ideal gas law

Answer: V2 = 31.46 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 308.1 K, T2 = 323.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 10·(300/100)·(323.1/308.1) = 31.46 L

Answer

V2 = 31.46 L
17.Heat engines & refrigerators

Answer: ηII = 70.24 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 700 + 273.15 = 973.1 K
TL = 35 + 273.15 = 308.1 K

Carnot efficiency

ηCarnot = 1 − 308.1/973.1 = 68.33 %

Second-law efficiency

ηII = η/ηCarnot = 48/68.33 = 70.24 %

Answer

ηII = 70.24 %
18.Heat engines & refrigerators

Answer: Ẇmin = 0.9485 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 21 + 273.15 = 294.1 K
TL = -10 + 273.15 = 263.1 K

Best possible COP

COPHP,max = TH/(TH − TL) = 294.1/(294.1 − 263.1) = 9.489

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇H/COP = 9/9.489 = 0.9485 kW

Answer

Ẇmin = 0.9485 kW
19.Waves, sound & optics

Answer: β = 62.99 dB

Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).

Intensity

I = P/(4πr²) = 1.989 × 10⁻⁶ W/m²

Level

β = 10·log₁₀(1.989 × 10⁻⁶/10⁻¹²) = 62.99 dB

Answer

β = 62.99 dB
20.Waves, sound & optics

Answer: f″ = 27486 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 30000·(343 − 15)/343 = 28688 Hz

Frequency of the echo

f″ = f′·343/(343 + 15) = 27486 Hz

Answer

f″ = 27486 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers