Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 21 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How long does it take the police car to catch up? Find t.
vcar = 21 m/sapolice = 3 m/s²v0,police = 0
t = s
2.KinematicsHard
A stone is dropped from rest into a well. The splash is heard 4.7 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.
ttotal = 4.7 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
A 10 kg box is pushed up a ramp at 35° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.
m = 10 kgθ = 35°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 45 N pulls the front 9 kg block; the 4 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 4 kgm2 = 9 kgF = 45 Nμ = 0.15g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 32 m/sθ = 50°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 50° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 13 m/sθ = 50°h = 35 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A toy launcher has a vertical spring of stiffness 2000 N/m. A 0.1 kg ball is placed on it and the spring is compressed by 6 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.
m = 0.1 kgk = 2000 N/mx = 6 cmg = 9.81 m/s²
h = m
8.Work & energyHard
A 10 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.15) and then runs onto a spring (k = 1000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 10 kgh = 4 mL = 2.5 mμ = 0.15k = 1000 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 0.5 kg glider moving at 7 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 0.5 kgm2 = 4.5 kgv1 = 7 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 0.25 kg ball hits a wall at 20 m/s and bounces straight back at 13 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.
m = 0.25 kgvin = 20 m/svout = 13 m/sΔt = 5 ms
Favg = N
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of glycerin, with its top edge 1.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 75 mm to 40 mm. In the wide section the pressure is 390 kPa and the velocity is 2.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A hose with an inner diameter of 20 mm siphons water from an open tank. The highest point C of the hose is 1.5 m above the water surface, and the outlet (open to the air) is 4.5 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the flow rate Q.
d = 20 mmzC = +1.5 mz2 = −4.5 mg = 9.81 m/s²
Q = L/s
15.Ideal gas lawMedium
A tank of 20 L contains 410 g of N₂ at 10 °C. Treat it as an ideal gas and find the pressure P.
A heat engine works between a hot reservoir at 325 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.
TH = 325 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at -20 °C in a kitchen at 32 °C, removing heat from the cold space at 1.5 kW. Find the minimum power input Ẇmin.
TH = 32 °CTL = -20 °CQ̇L = 1.5 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
A string fixed at both ends is 1.2 m long; waves travel on it at 240 m/s. Find the frequency f4 of its harmonic number 4.
v = 240 m/sn = 4L = 1.2 m
f4 = Hz
20.Waves, sound & opticsHard
A diffraction grating has 1200 lines per millimetre. Light of wavelength 405 nm falls on it at right angles. What is the highest order mmax of bright maximum that can be seen?
N = 1200 mm⁻¹λ = 405 nm
mmax =
3Solutions
1.Kinematics
Answer: t = 14 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·21/3 = 14 s
Answer
t = 14 s
At that moment the police car moves at 2v = 42 m/s.
2.Kinematics
Answer: d = 95.85 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Two parts of the time
½·9.81·t₁² = 343·(4.7 − t₁)
4.905·t₁² + 343·t₁ − 1612 = 0
Fall time
Only the positive root is physical.
t₁ = (−343 + √(343² + 4·4.905·1612))/(2·4.905) = 4.421 s
Depth
d = ½·9.81·4.421² = 95.85 m
Answer
d = 95.85 m
3.Newton’s laws
Answer: F = 72.34 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 56.27 + 16.07 = 72.34 N
Answer
F = 72.34 N
4.Newton’s laws
Answer: a = 1.99 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 32·cos 50° = 20.57 m/s
vy = v0·sin θ = 32·sin 50° = 24.51 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 24.51²/(2·9.81) = 30.63 m
Answer
H = 30.63 m
6.Projectile motion
Answer: x = 32.36 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 13·cos 50° = 8.356 m/s
vy = v0·sin θ = 13·sin 50° = 9.959 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 35 + 9.959·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (9.959 + √(99.17 + 686.7))/9.81 = 3.873 s
Horizontal distance
x = vx·t = 8.356·3.873 = 32.36 m
Answer
x = 32.36 m
7.Work & energy
Answer: h = 3.67 m
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Spring energy
x = 6 cm = 0.06 m
½kx² = ½·2000·0.06² = 3.6 J
Height
m·g = 0.1·9.81 = 0.981 N
h = ½kx²/(mg) = 3.6/0.981 = 3.67 m
Answer
h = 3.67 m
8.Work & energy
Answer: v = 8.433 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 98.1·(4 − 0.15·2.5) = 355.6 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·3.625) = 8.433 m/s
Answer
v = 8.433 m/s
9.Momentum & collisions
Answer: v′1 = −5.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 4.5)/(0.5 + 4.5)·7 = −5.6 m/s
v′2 = 2·0.5/(0.5 + 4.5)·7 = 1.4 m/s
Answer
v′1 = −5.6 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: Favg = 1650 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.25·(13 + 20) = 8.25 N·s
Average force
Favg = J/Δt = 8.25/0.005 = 1650 N
Answer
Favg = 1650 N
11.Hydrostatic force
Answer: F = 138 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 2.5/2 = 3.75 m
A = H·b = 2.5·1.5 = 3.75 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.75·3.75 = 138 kN
Answer
F = 138 kN
12.Hydrostatic force
Answer: ycp = 2.633 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2/2 = 2.5 m
A = H·b = 2·1.5 = 3 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·2.5·3 = 92.7 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 1.5·2³/12 = 1 m⁴
ycp = yc + Ic/(yc·A) = 2.5 + 1/(2.5·3) = 2.633 m
Answer
ycp = 2.633 m
13.Continuity & Bernoulli
Answer: p2 = 354.5 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Velocity in the hose
Surface and outlet are both open to the air, so the pressure terms cancel.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 325 + 273.15 = 598.1 K
TL = 40 + 273.15 = 313.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 313.1/598.1 = 47.65 %
Answer
ηmax = 47.65 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.3081 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 1.5/4.868 = 0.3081 kW
Answer
Ẇmin = 0.3081 kW
19.Waves, sound & optics
Answer: f4 = 400 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 2L/n = 2·1.2/4 = 0.6 m
Frequency
f = v/λ = 240/0.6 = 400 Hz
Answer
f4 = 400 Hz
20.Waves, sound & optics
Answer: mmax = 2
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …