Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
policea = 4 m/s²car25 m/s

A car speeding at a constant 25 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4 m/s². How long does it take the police car to catch up? Find t.

vcar = 25 m/sapolice = 4 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 19 m/s15 m

A ball is thrown straight up at 19 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 19 m/sh₀ = 15 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 20°a = ?m = 10 kg

A 10 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 10 kgθ = 20°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 4.5 kg2 kgμ = 0.1

A 4.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 4.5 kgm2 = 2 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 26 m/s20°x = ?

A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 26 m/sθ = 20°g = 9.81 m/s²
x = m
6.Projectile motionHard
h = 20 mv0​ = 13 m/s30°H = ?

A ball is launched at 13 m/s and 30° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 13 m/sθ = 30°h = 20 mg = 9.81 m/s²
H = m
7.Work & energyMedium
70 km/h

A car travelling at 70 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.8. Find the stopping distance d.

v = 70 km/hμ = 0.8g = 9.81 m/s²
d = m
8.Work & energyHard
F = 155 N20°μ = 0.1520 kg

A 20 kg block starts from rest at the bottom of a 20° slope and is pulled up the slope by a constant force of 155 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 6 m up the slope.

m = 20 kgF = 155 Nθ = 20°μ = 0.15d = 6 mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
8 kg76 m/s1 kgv′2​ = ?

A 9 kg projectile moving horizontally at 25 m/s explodes into two fragments that move along the same line. The 8 kg fragment continues forwards at 76 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).

M = 9 kgu = 25 m/sm1 = 8 kgv′1 = 76 m/sm2 = 1 kg
v′2 = m/s
10.Momentum & collisionsHard
1200 kg17 m/s1600 kg18 m/sv′ = ?

At a crossing a 1200 kg car travelling east at 17 m/s collides with a 1600 kg car travelling north at 18 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1200 kgv1 = 17 m/s (E)m2 = 1600 kgv2 = 18 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
gated = 3 mH = 1.5 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 3 mH = 1.5 mb = 2 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 2.5 mH = 2.5 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of glycerin, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 2.5 mH = 2.5 mb = 2 mρ = 1260 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 150 mm, p1​ = 370 kPad2​ = 100 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 150 mm to 100 mm. In the wide section the pressure is 370 kPa and the velocity is 3 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 150 mmd2 = 100 mmp1 = 370 kPav1 = 3 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
pair​ = 160 kPav = ?d = 25 mmh = 3.5 m

A closed water tank has compressed air above the water at a gauge pressure of 160 kPa. Water leaves through an opening with a diameter of 25 mm, 3.5 m below the water surface, into the open air. Ignoring losses, find the jet velocity v. Use g = 9.81 m/s².

pair = 160 kPa (gauge)h = 3.5 md = 25 mmρ = 1000 kg/m³g = 9.81 m/s²
v = m/s
15.Ideal gas lawMedium
290 g of N₂V = 30 LT = 50 °CP = ?

A tank of 30 L contains 290 g of N₂ at 50 °C. Treat it as an ideal gas and find the pressure P.

m = 290 gM = 28.01 g/molV = 30 LT = 50 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of He goes from 150 kPa, 2 L, 30 °C to 650 kPa and 150 °C. Find the new volume V2.

P1 = 150 kPaV1 = 2 LT1 = 30 °CP2 = 650 kPaT2 = 150 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 650 °CTL​ = 15 °CEQH​ = 3200 kJQL​W = ?

A heat engine works between a hot reservoir at 650 °C and a cold reservoir at 15 °C. It takes in 3200 kJ of heat. Find the most work Wmax it could possibly produce.

TH = 650 °CTL = 15 °CQH = 3200 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
TH​ = 900 °CTL​ = 30 °CEQH​ = 3200 kJQL​ = 1312 kJW = 1888 kJ

A heat engine takes in 3200 kJ of heat from a reservoir at 900 °C, produces 1888 kJ of work and rejects the rest to a reservoir at 30 °C, per cycle. Find the total entropy generated Sgen per cycle.

TH = 900 °CTL = 30 °CQH = 3200 kJW = 1888 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
S34 m/sOf = 500 Hz

A source of 500 Hz moves at 34 m/s away from a stationary observer. The speed of sound is 343 m/s. Find the frequency f′ that the observer hears.

f = 500 Hzv = 343 m/svs = 34 m/s
f′ = Hz
20.Waves, sound & opticsHard
SO30 m/sf = 40 kHz

A sensor at rest sends ultrasound of 40 kHz towards a car that moves away at 30 m/s and mixes the echo with the emitted signal. Find the beat frequency fb (speed of sound 343 m/s).

f = 40 kHzu = 30 m/sv = 343 m/s
fb = Hz

3Solutions

1.Kinematics

Answer: t = 12.5 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·25/4 = 12.5 s

Answer

t = 12.5 s

At that moment the police car moves at 2v = 50 m/s.

2.Kinematics

Answer: hmax = 33.4 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 19²/(2·9.81) = 18.4 m

Height above the ground

hmax = 15 + 18.4 = 33.4 m

Answer

hmax = 33.4 m
3.Newton’s laws

Answer: a = 1.512 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0.2·cos 20°) = 9.81·(0.342 − 0.1879) = 1.512 m/s²

Answer

a = 1.512 m/s²
4.Newton’s laws

Answer: a = 2.339 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (19.62 − 4.415)/6.5 = 2.339 m/s²

Answer

a = 2.339 m/s²
5.Projectile motion

Answer: x = 44.29 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 20° = 24.43 m/s
vy = v0·sin θ = 26·sin 20° = 8.893 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·8.893/9.81 = 1.813 s

Horizontal distance

x = vx·t = 24.43·1.813 = 44.29 m

Answer

x = 44.29 m
6.Projectile motion

Answer: H = 22.15 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 13·sin 30° = 6.5 m/s

Rise above the cliff

Δh = vy²/(2g) = 6.5²/(2·9.81) = 2.153 m

Height above the ground

H = 20 + 2.153 = 22.15 m

Answer

H = 22.15 m
7.Work & energy

Answer: d = 24.09 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 70/3.6 = 19.44 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 19.44²/(2·0.8·9.81) = 24.09 m

Answer

d = 24.09 m

Doubling the speed makes the stopping distance four times longer.

8.Work & energy

Answer: v = 6.012 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 20·9.81 = 196.2 N
mg·sin θ = 67.1 N
μ·mg·cos θ = 27.66 N

Work–energy

½mv² = (155 − 94.76)·6 = 361.4 J
v = √(2·361.4/20) = 6.012 m/s

Answer

v = 6.012 m/s
9.Momentum & collisions

Answer: v′2 = −383 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 9·25 = 225 kg·m/s

Momentum after

225 = 8·76 + 1·v′2
v′2 = (225 − 608)/1 = −383 m/s

Answer

v′2 = −383 m/s

The minus sign means the second fragment flies backwards.

10.Momentum & collisions

Answer: v′ = 12.6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1200·17 = 20400 kg·m/s
py = 1600·18 = 28800 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 35293/2800 = 12.6 m/s

Answer

v′ = 12.6 m/s
11.Hydrostatic force

Answer: F = 110.4 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 3 + 1.5/2 = 3.75 m
A = H·b = 1.5·2 = 3 m²
gated = 3 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·3.75·3 = 110.4 kN

Answer

F = 110.4 kN
12.Hydrostatic force

Answer: F = 231.8 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 2.5 + 2.5/2 = 3.75 m
A = H·b = 2.5·2 = 5 m²
gated = 2.5 mH = 2.5 mF

Resultant force

F = ρ·g·yc·A = 1260·9.81·3.75·5 = 231.8 kN

Answer

F = 231.8 kN
13.Continuity & Bernoulli

Answer: p2 = 351.7 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 3·(150/100)² = 6.75 m/s
½ρ(v1² − v2²) = ½·1000·(3² − 6.75²)/1000 = −18.28 kPa
p2 = p1 + ½ρ(v1² − v2²) = 370 + (−18.28) = 351.7 kPa

Answer

p2 = 351.7 kPa
14.Continuity & Bernoulli

Answer: v = 19.71 m/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Bernoulli from the surface to the jet

v = √(2·(160000/1000 + 9.81·3.5)) = 19.71 m/s

Answer

v = 19.71 m/s
15.Ideal gas law

Answer: P = 927.2 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 290/28.01 = 10.35 mol
T = 50 + 273.15 = 323.1 K

Pressure

P = nRT/V = 10.35·8.314·323.1/0.03 = 927.2 kPa

Answer

P = 927.2 kPa
16.Ideal gas law

Answer: V2 = 0.6442 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 303.1 K, T2 = 423.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 2·(150/650)·(423.1/303.1) = 0.6442 L

Answer

V2 = 0.6442 L
17.Heat engines & refrigerators

Answer: Wmax = 2201 kJ

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 650 + 273.15 = 923.1 K
TL = 15 + 273.15 = 288.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 288.1/923.1 = 68.79 %

Maximum work

Wmax = ηmax·QH = 0.6879·3200 = 2201 kJ

Answer

Wmax = 2201 kJ
18.Heat engines & refrigerators

Answer: Sgen = 1.6 kJ/K

Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.

Heat rejected

QL = QH − W = 3200 − 1888 = 1312 kJ

Absolute temperatures

TH = 900 + 273.15 = 1173 K
TL = 30 + 273.15 = 303.1 K

Entropy changes of the reservoirs

ΔSH = −3200/1173 = −2.728 kJ/K
ΔSL = 1312/303.1 = 4.328 kJ/K
Sgen = 4.328 − 2.728 = 1.6 kJ/K

Answer

Sgen = 1.6 kJ/K

Sgen > 0, so the engine is possible but irreversible.

19.Waves, sound & optics

Answer: f′ = 454.9 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Doppler formula

f′ = f·(v − vo)/(v + vs) = 500·(343 − 0)/(343 + 34)
f′ = 454.9 Hz

Answer

f′ = 454.9 Hz
20.Waves, sound & optics

Answer: fb = 6434 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 40000·(343 − 30)/343 = 36501 Hz

Frequency of the echo

f″ = f′·343/(343 + 30) = 33566 Hz

Beat frequency

fb = |f″ − f| = 6434 Hz

Answer

fb = 6434 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers