Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
policea = 2 m/s²car35 m/s

A car speeding at a constant 35 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2 m/s². How long does it take the police car to catch up? Find t.

vcar = 35 m/sapolice = 2 m/s²v0,police = 0
t = s
2.KinematicsHard
AB: 20 m/s40 m

Ball A is dropped from rest from a height of 40 m. At the same instant ball B is thrown straight up from the ground directly below at 20 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.

H = 40 mv0B = 20 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 20°a = ?m = 17 kg

A 17 kg block slides down a frictionless slope at 20° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 17 kgθ = 20°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
θ = 35°blockv₀ = 10.5 m/s

A block is given a push so that it starts sliding up a ramp at 35° with a speed of 10.5 m/s. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 10.5 m/sθ = 35°μ = 0.15g = 9.81 m/s²
d = m
5.Projectile motionMedium
20 my = ?v0​ = 16 m/s35°

A ball is kicked from level ground at 16 m/s and 35° above the horizontal towards a wall 20 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 16 m/sθ = 35°x = 20 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 40 mv0​ = 12 m/s65°H = ?

A ball is launched at 12 m/s and 65° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.

v₀ = 12 m/sθ = 65°h = 40 mg = 9.81 m/s²
H = m
7.Work & energyMedium
30°d = 7 mμ = 0.25

A 1 kg block slides 7 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 1 kgθ = 30°μ = 0.25d = 7 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
h = 1 mL = 3 mμ = 0.2k = 4000 N/m

A 0.5 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.2) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 0.5 kgh = 1 mL = 3 mμ = 0.2k = 4000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
5 kg54 m/s5 kgv′2​ = ?

A 10 kg projectile moving horizontally at 30 m/s explodes into two fragments that move along the same line. The 5 kg fragment continues forwards at 54 m/s. Find the velocity v′2 of the 5 kg fragment (positive in the original direction).

M = 10 kgu = 30 m/sm1 = 5 kgv′1 = 54 m/sm2 = 5 kg
v′2 = m/s
10.Momentum & collisionsHard
12 m/s5 m/s

A 0.45 kg ball hits a wall at 12 m/s and bounces straight back at 5 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.

m = 0.45 kgvin = 12 m/svout = 5 m/sΔt = 20 ms
Favg = N
11.Hydrostatic forceMedium
gated = 1.5 mH = 3 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1.5 mH = 3 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 3 mH = 2.5 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 3 mH = 2.5 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
d1​ = 250 mmd2​ = 125 mm12p1​ − p2​ = 29 kPaQ = ?

Water flows through a horizontal venturi meter with an inlet diameter of 250 mm and a throat diameter of 125 mm. The pressure at the inlet is 29 kPa higher than at the throat. Ignoring losses, find the flow rate Q.

d1 = 250 mmd2 = 125 mmp1 − p2 = 29 kPaρ = 1000 kg/m³
Q = L/s
14.Continuity & BernoulliHard
12d1​ = 150 mm, p1​ = 390 kPad2​ = 50 mm, p2​ = ?Δz = 7 m

Water flows up through a pipe that narrows from 150 mm to 50 mm while rising 7 m. At section 1 the pressure is 390 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 150 mmd2 = 50 mmp1 = 390 kPav1 = 1.25 m/sΔz = 7 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
410 g of HeV = 5 LT = 45 °CP = ?

A tank of 5 L contains 410 g of He at 45 °C. Treat it as an ideal gas and find the pressure P.

m = 410 gM = 4.003 g/molV = 5 LT = 45 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
O₂, M = 32 g/molP = 850 kPaT = 200 °Cρ = ?

Find the density ρ of O₂ at 850 kPa and 200 °C, treating it as an ideal gas.

M = 32 g/molP = 850 kPaT = 200 °CR = 8.314 J/(mol·K)
ρ = kg/m³
17.Heat engines & refrigeratorsMedium
TH​ = 375 °CTL​ = 25 °CEQH​ = 3500 kJQL​W = ?

A heat engine works between a hot reservoir at 375 °C and a cold reservoir at 25 °C. It takes in 3500 kJ of heat. Find the most work Wmax it could possibly produce.

TH = 375 °CTL = 25 °CQH = 3500 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
TH​ = 22 °CTL​ = 7 °CHPQ̇H​ = 5 kWQ̇L​Ẇ = ?

A heat pump keeps a house at 22 °C while it is 7 °C outside, delivering 5 kW of heat to the house. Find the minimum power input Ẇmin.

TH = 22 °CTL = 7 °CQ̇H = 5 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
L = 0.6 mn = 5

A pipe closed at one end is 0.6 m long. The speed of sound is 343 m/s. Find the frequency f5 of its harmonic number 5.

v = 343 m/sn = 5L = 0.6 m
f5 = Hz
20.Waves, sound & opticsHard
SO20 m/sf = 25 kHz

A parking sensor at rest sends ultrasound of 25 kHz towards a car that moves away at 20 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).

f = 25 kHzu = 20 m/sv = 343 m/s
f″ = Hz

3Solutions

1.Kinematics

Answer: t = 35 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·35/2 = 35 s

Answer

t = 35 s

At that moment the police car moves at 2v = 70 m/s.

2.Kinematics

Answer: t = 2 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Meeting time

Up is positive, the ground is y = 0.

40 − ½g·t² = 20·t − ½g·t² → t = 40/20 = 2 s

Answer

t = 2 s
3.Newton’s laws

Answer: a = 3.355 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 20° − 0·cos 20°) = 9.81·(0.342 − 0) = 3.355 m/s²

Answer

a = 3.355 m/s²
4.Newton’s laws

Answer: d = 8.068 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 35° + 0.15·cos 35°) = 6.832 m/s²

Distance

d = v₀²/(2a) = 10.5²/(2·6.832) = 8.068 m

Answer

d = 8.068 m
5.Projectile motion

Answer: y = 2.582 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 16·cos 35° = 13.11 m/s
t = x/vx = 20/13.11 = 1.526 s

Height at that time

y = 9.177·1.526 − ½·9.81·1.526² = 2.582 m

Answer

y = 2.582 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: H = 46.03 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Vertical launch speed

vy = 12·sin 65° = 10.88 m/s

Rise above the cliff

Δh = vy²/(2g) = 10.88²/(2·9.81) = 6.029 m

Height above the ground

H = 40 + 6.029 = 46.03 m

Answer

H = 46.03 m
7.Work & energy

Answer: Wf = 14.87 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 9.81·0.866 = 8.496 N
F = μN = 0.25·8.496 = 2.124 N

Work against friction

Wf = F·d = 2.124·7 = 14.87 J

Answer

Wf = 14.87 J
8.Work & energy

Answer: x = 3.132 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 4.905·(1 − 0.2·3) = 1.962 J

Maximum compression

½kx² = 1.962 → x = √(2·1.962/4000) = 0.03132 m = 3.132 cm

Answer

x = 3.132 cm
9.Momentum & collisions

Answer: v′2 = 6 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 10·30 = 300 kg·m/s

Momentum after

300 = 5·54 + 5·v′2
v′2 = (300 − 270)/5 = 6 m/s

Answer

v′2 = 6 m/s
10.Momentum & collisions

Answer: Favg = 382.5 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.45·(5 + 12) = 7.65 N·s

Average force

Favg = J/Δt = 7.65/0.02 = 382.5 N

Answer

Favg = 382.5 N
11.Hydrostatic force

Answer: F = 88.29 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1.5 + 3/2 = 3 m
A = H·b = 3·1 = 3 m²
gated = 1.5 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·3·3 = 88.29 kN

Answer

F = 88.29 kN
12.Hydrostatic force

Answer: F = 312.7 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 3 + 2.5/2 = 4.25 m
A = H·b = 2.5·3 = 7.5 m²
gated = 3 mH = 2.5 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·4.25·7.5 = 312.7 kN

Answer

F = 312.7 kN
13.Continuity & Bernoulli

Answer: Q = 96.52 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity

v1 = v2·(125/250)² = 0.25·v2

Bernoulli between inlet and throat

The pipe is horizontal, so only pressure and velocity change.

p1 − p2 = ½ρv2²(1 − β⁴)
v2 = √(2·29000/(1000·(1 − 0.0625))) = 7.866 m/s
v1 = 1.966 m/s

Flow rate

Q = A2·v2 = 0.01227·7.866 = 0.09652 m³/s = 96.52 L/s

Answer

Q = 96.52 L/s
14.Continuity & Bernoulli

Answer: p2 = 258.8 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 1.25·(150/50)² = 11.25 m/s
½ρ(v1² − v2²) = ½·1000·(1.25² − 11.25²)/1000 = −62.5 kPa
ρgΔz = 1000·9.81·7/1000 = 68.67 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 390 + (−62.5) − 68.67 = 258.8 kPa

Answer

p2 = 258.8 kPa
15.Ideal gas law

Answer: P = 54184 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 410/4.003 = 102.4 mol
T = 45 + 273.15 = 318.1 K

Pressure

P = nRT/V = 102.4·8.314·318.1/0.005 = 54184 kPa

Answer

P = 54184 kPa
16.Ideal gas law

Answer: ρ = 6.914 kg/m³

Ideal gas density: ρ = PM/(RT).

Rearrange the gas law

PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 200 + 273.15 = 473.1 K

Density

ρ = 850·32/(8.314·473.1) = 6.914 kg/m³

Answer

ρ = 6.914 kg/m³
17.Heat engines & refrigerators

Answer: Wmax = 1890 kJ

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 375 + 273.15 = 648.1 K
TL = 25 + 273.15 = 298.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 298.1/648.1 = 54 %

Maximum work

Wmax = ηmax·QH = 0.54·3500 = 1890 kJ

Answer

Wmax = 1890 kJ
18.Heat engines & refrigerators

Answer: Ẇmin = 0.2541 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 22 + 273.15 = 295.1 K
TL = 7 + 273.15 = 280.1 K

Best possible COP

COPHP,max = TH/(TH − TL) = 295.1/(295.1 − 280.1) = 19.68

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇H/COP = 5/19.68 = 0.2541 kW

Answer

Ẇmin = 0.2541 kW
19.Waves, sound & optics

Answer: f5 = 714.6 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Wavelength of this mode

λ = 4L/n = 4·0.6/5 = 0.48 m

Frequency

f = v/λ = 343/0.48 = 714.6 Hz

Answer

f5 = 714.6 Hz
20.Waves, sound & optics

Answer: f″ = 22245 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 25000·(343 − 20)/343 = 23542 Hz

Frequency of the echo

f″ = f′·343/(343 + 20) = 22245 Hz

Answer

f″ = 22245 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers