Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.5 s15

A car driving at 54 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.

v₀ = 54 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 17 m/s40 m

A ball is thrown straight up at 17 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 17 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 25°a = ?m = 3 kg

A 3 kg block slides down a frictionless slope at 25° to the horizontal. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 3 kgθ = 25°μ = 0g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
10 kg4 kgTF = 125 Nμ = 0.3

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 125 N pulls the front 4 kg block; the 10 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 10 kgm2 = 4 kgF = 125 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = 26 m/s40°range

A ball is launched at 40° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 26 m/sθ = 40°g = 9.81 m/s²
t = s
6.Projectile motionHard
h = 40 mv0​ = 15 m/s55°α = ?

A ball is launched at 15 m/s and 55° above the horizontal from the top of a 40 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 15 m/sθ = 55°h = 40 mg = 9.81 m/s²
α = °
7.Work & energyMedium
30°d = 14 mμ = 0.15

A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Find its speed v after it has slid 14 m along the slope.

θ = 30°μ = 0.15d = 14 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
h = 5 mL = 5 mμ = 0.15k = 1500 N/m

A 5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 5 m long (μ = 0.15) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 5 kgh = 5 mL = 5 mμ = 0.15k = 1500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
1100 kg7 m/s2000 kg

A 1100 kg car moving at 7 m/s runs into a stationary 2000 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?

m1 = 1100 kgv1 = 7 m/sm2 = 2000 kgv2 = 0
ΔK/K = %
10.Momentum & collisionsHard
23 m/s11 m/s

A 0.1 kg ball hits a wall at 23 m/s and bounces straight back at 11 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.

m = 0.1 kgvin = 23 m/svout = 11 m/sΔt = 20 ms
Favg = N
11.Hydrostatic forceMedium
gated = 3 mH = 2.5 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 3 mH = 2.5 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 1 mH = 2.5 m

A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 2.5 mb = 1.5 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
d1​ = 200 mmd2​ = 150 mm12p1​ − p2​ = 31 kPaQ = ?

Water flows through a horizontal venturi meter with an inlet diameter of 200 mm and a throat diameter of 150 mm. The pressure at the inlet is 31 kPa higher than at the throat. Ignoring losses, find the flow rate Q.

d1 = 200 mmd2 = 150 mmp1 − p2 = 31 kPaρ = 1000 kg/m³
Q = L/s
14.Continuity & BernoulliHard
12d1​ = 150 mm, p1​ = 200 kPad2​ = 100 mm, p2​ = ?Δz = 2 m

Water flows up through a pipe that narrows from 150 mm to 100 mm while rising 2 m. At section 1 the pressure is 200 kPa and the velocity is 2.75 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 150 mmd2 = 100 mmp1 = 200 kPav1 = 2.75 m/sΔz = 2 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
350 g of O₂V = 5 LT = 20 °CP = ?

A tank of 5 L contains 350 g of O₂ at 20 °C. Treat it as an ideal gas and find the pressure P.

m = 350 gM = 32 g/molV = 5 LT = 20 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of N₂ goes from 350 kPa, 20 L, 30 °C to 800 kPa and 180 °C. Find the new volume V2.

P1 = 350 kPaV1 = 20 LT1 = 30 °CP2 = 800 kPaT2 = 180 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 400 °CTL​ = 40 °CEQH​QL​W

A heat engine works between a hot reservoir at 400 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.

TH = 400 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
TH​ = 450 °CT0​ = 20 °CTL​ = -10 °CERWQ̇H​ = 90 kWQ̇L​ = ?

A Carnot heat engine receives 90 kW of heat from a source at 450 °C and rejects heat to the surroundings at 20 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at -10 °C and also rejects heat to the surroundings at 20 °C. Find the rate Q̇L at which heat is removed from the freezer.

TH = 450 °CT0 = 20 °CTL = -10 °CQ̇H = 90 kW
Q̇L = kW
19.Waves, sound & opticsMedium
S15 m/sOf = 400 Hz

A source of 400 Hz moves at 15 m/s towards a stationary observer. The speed of sound is 343 m/s. Find the frequency f′ that the observer hears.

f = 400 Hzv = 343 m/svs = 15 m/s
f′ = Hz
20.Waves, sound & opticsHard
λ = 532 nmθ

A diffraction grating has 800 lines per millimetre. Light of wavelength 532 nm falls on it at right angles. What is the highest order mmax of bright maximum that can be seen?

N = 800 mm⁻¹λ = 532 nm
mmax =

3Solutions

1.Kinematics

Answer: s = 18.75 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 15²/(2·6) = 18.75 m

Answer

s = 18.75 m
2.Kinematics

Answer: t = 5.073 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−40 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 40 = 0

Solve the quadratic

Only the positive root is physical.

t = (17 + √(17² + 2·9.81·40))/9.81 = 5.073 s

Answer

t = 5.073 s
3.Newton’s laws

Answer: a = 4.146 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 25° − 0·cos 25°) = 9.81·(0.4226 − 0) = 4.146 m/s²

Answer

a = 4.146 m/s²
4.Newton’s laws

Answer: T = 89.29 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (125 − 41.2)/14 = 5.986 m/s²

Rear block alone

T = m1·(a + μ·g) = 10·(5.986 + 2.943) = 89.29 N

Answer

T = 89.29 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: t = 3.407 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 26·cos 40° = 19.92 m/s
vy = v0·sin θ = 26·sin 40° = 16.71 m/s

Time in the air

Starting and landing at the same height: t = 2vy/g.

t = 2·16.71/9.81 = 3.407 s

Answer

t = 3.407 s
6.Projectile motion

Answer: α = 74.29 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 15·cos 55° = 8.604 m/s
vy0 = 15·sin 55° = 12.29 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(12.29² + 2·9.81·40) = 30.59 m/s

Impact angle

tan α = vy/vx = 30.59/8.604 → α = 74.29°

Answer

α = 74.29°
7.Work & energy

Answer: v = 10.08 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·14·(0.5 − 0.15·0.866)) = 10.08 m/s

Answer

v = 10.08 m/s
8.Work & energy

Answer: x = 52.72 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 49.05·(5 − 0.15·5) = 208.5 J

Maximum compression

½kx² = 208.5 → x = √(2·208.5/1500) = 0.5272 m = 52.72 cm

Answer

x = 52.72 cm
9.Momentum & collisions

Answer: ΔK/K = 64.52 %

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1100·7/3100 = 2.484 m/s

Kinetic energy before and after

Kbefore = ½·1100·7² = 26950 J
Kafter = ½·3100·2.484² = 9563 J

Fraction lost

ΔK/K = 17387/26950 = 64.52 %

Answer

ΔK/K = 64.52 %

The lost energy goes into deformation, heat and sound.

10.Momentum & collisions

Answer: Favg = 170 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.1·(11 + 23) = 3.4 N·s

Average force

Favg = J/Δt = 3.4/0.02 = 170 N

Answer

Favg = 170 N
11.Hydrostatic force

Answer: F = 312.7 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 3 + 2.5/2 = 4.25 m
A = H·b = 2.5·3 = 7.5 m²
gated = 3 mH = 2.5 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·4.25·7.5 = 312.7 kN

Answer

F = 312.7 kN
12.Hydrostatic force

Answer: F = 72.84 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 2.5/2 = 2.25 m
A = H·b = 2.5·1.5 = 3.75 m²
gated = 1 mH = 2.5 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·2.25·3.75 = 72.84 kN

Answer

F = 72.84 kN
13.Continuity & Bernoulli

Answer: Q = 168.3 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity

v1 = v2·(150/200)² = 0.5625·v2

Bernoulli between inlet and throat

The pipe is horizontal, so only pressure and velocity change.

p1 − p2 = ½ρv2²(1 − β⁴)
v2 = √(2·31000/(1000·(1 − 0.3164))) = 9.524 m/s
v1 = 5.357 m/s

Flow rate

Q = A2·v2 = 0.01767·9.524 = 0.1683 m³/s = 168.3 L/s

Answer

Q = 168.3 L/s
14.Continuity & Bernoulli

Answer: p2 = 165 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 2.75·(150/100)² = 6.188 m/s
½ρ(v1² − v2²) = ½·1000·(2.75² − 6.188²)/1000 = −15.36 kPa
ρgΔz = 1000·9.81·2/1000 = 19.62 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 200 + (−15.36) − 19.62 = 165 kPa

Answer

p2 = 165 kPa
15.Ideal gas law

Answer: P = 5331 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 350/32 = 10.94 mol
T = 20 + 273.15 = 293.1 K

Pressure

P = nRT/V = 10.94·8.314·293.1/0.005 = 5331 kPa

Answer

P = 5331 kPa
16.Ideal gas law

Answer: V2 = 13.08 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 303.1 K, T2 = 453.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 20·(350/800)·(453.1/303.1) = 13.08 L

Answer

V2 = 13.08 L
17.Heat engines & refrigerators

Answer: ηmax = 53.48 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 400 + 273.15 = 673.1 K
TL = 40 + 273.15 = 313.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 313.1/673.1 = 53.48 %

Answer

ηmax = 53.48 %
18.Heat engines & refrigerators

Answer: Q̇L = 469.4 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 450 + 273.15 = 723.1 K
T0 = 20 + 273.15 = 293.1 K
TL = -10 + 273.15 = 263.1 K

Engine work

η = 1 − 293.1/723.1 = 0.5946
Ẇ = 0.5946·90 = 53.52 kW

Heat removed by the refrigerator

COPR = 263.1/(293.1 − 263.1) = 8.772
Q̇L = 8.772·53.52 = 469.4 kW

Answer

Q̇L = 469.4 kW
19.Waves, sound & optics

Answer: f′ = 418.3 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Doppler formula

f′ = f·(v + vo)/(v − vs) = 400·(343 + 0)/(343 − 15)
f′ = 418.3 Hz

Answer

f′ = 418.3 Hz
20.Waves, sound & optics

Answer: mmax = 2

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Line spacing

d = 1/800 mm = 1.25 µm

Highest order

m ≤ d/λ = 1.25 µm/0.532 µm = 2.35 → mmax = 2

Answer

mmax = 2

ExamProblems · examproblems.com/courses/physics-for-engineers