Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 2.5 m/s² along a runway. Find its speed v after 700 m.
v₀ = 0a = 2.5 m/s²s = 700 m
v = m/s
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 24 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 24 m/s²t1 = 2.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 45 kg box is pushed up a ramp at 25° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.
m = 45 kgθ = 25°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 110 N pulls the front 1 kg block; the 10 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 10 kgm2 = 1 kgF = 110 Nμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is kicked from level ground at 16 m/s and 20° above the horizontal towards a wall 5 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 16 m/sθ = 20°x = 5 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 20 m/s and 20° above the horizontal from the top of a 25 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the speed v with which it hits the ground.
v₀ = 20 m/sθ = 20°h = 25 mg = 9.81 m/s²
v = m/s
7.Work & energyMedium
A 5 kg block slides 14 m down a slope at 25° to the horizontal, with a coefficient of kinetic friction of 0.3. Find the work Wf done against friction.
m = 5 kgθ = 25°μ = 0.3d = 14 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
A 1 kg block is released from rest at height 1 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.1) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 1 kgh = 1 mL = 4.5 mμ = 0.1k = 4000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 700 kg car moving at 12 m/s runs into a stationary 1900 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 700 kgv1 = 12 m/sm2 = 1900 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
A 0.25 kg ball hits a wall at 19 m/s and bounces straight back at 19 m/s. The contact lasts 20 ms. Find the average force Favg of the wall on the ball.
m = 0.25 kgvin = 19 m/svout = 19 m/sΔt = 20 ms
Favg = N
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 3 m wide sits in the wall of a tank of seawater, with its top edge 3 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 3 mH = 3 mb = 3 mρ = 1025 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water flows through a horizontal venturi meter with an inlet diameter of 200 mm and a throat diameter of 100 mm. The pressure at the inlet is 49 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
Water flows up through a pipe that narrows from 150 mm to 100 mm while rising 4 m. At section 1 the pressure is 240 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 625 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.
TH = 625 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
Two Carnot engines work in series. Engine A receives heat from a reservoir at 900 °C and rejects heat to an intermediate reservoir at temperature Tm. Engine B takes all that heat and rejects heat to a reservoir at 40 °C. Both engines produce the same work. Find Tm in °C.
TH = 900 °CTL = 40 °C
Tm = °C
19.Waves, sound & opticsMedium
A small source sends sound equally in all directions. The level is 70 dB at 1 m from it. Find the level β2 at 4 m, ignoring absorption and reflections.
β1 = 70 dBr1 = 1 mr2 = 4 m
β2 = dB
20.Waves, sound & opticsHard
An object is 12 cm in front of a concave mirror with a radius of curvature of 60 cm. Find the image distance di, positive for an image in front of the mirror (real) and negative for one behind it (virtual).
do = 12 cmR = 60 cm
di = cm
3Solutions
1.Kinematics
Answer: v = 59.16 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·2.5·700) = 59.16 m/s
Answer
v = 59.16 m/s
(213 km/h)
2.Kinematics
Answer: hmax = 258.5 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 24·2.5 = 60 m/s
h₁ = ½·24·2.5² = 75 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 60²/(2·9.81) = 183.5 m
hmax = 75 + 183.5 = 258.5 m
Answer
hmax = 258.5 m
3.Newton’s laws
Answer: F = 266.6 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 186.6 + 80.02 = 266.6 N
Answer
F = 266.6 N
4.Newton’s laws
Answer: T = 100 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: y = 1.277 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 16·cos 20° = 15.04 m/s
t = x/vx = 5/15.04 = 0.3326 s
Height at that time
y = 5.472·0.3326 − ½·9.81·0.3326² = 1.277 m
Answer
y = 1.277 m
The ball is still rising at the wall.
6.Projectile motion
Answer: v = 29.84 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 20·cos 20° = 18.79 m/s
vy0 = 20·sin 20° = 6.84 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(6.84² + 2·9.81·25) = 23.18 m/s
Impact speed
v = √(18.79² + 23.18²) = 29.84 m/s
Answer
v = 29.84 m/s
Check with energy: v² = v₀² + 2gh.
7.Work & energy
Answer: Wf = 186.7 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 49.05·0.9063 = 44.45 N
F = μN = 0.3·44.45 = 13.34 N
Work against friction
Wf = F·d = 13.34·14 = 186.7 J
Answer
Wf = 186.7 J
8.Work & energy
Answer: x = 5.194 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 9.81·(1 − 0.1·4.5) = 5.396 J
Maximum compression
½kx² = 5.396 → x = √(2·5.396/4000) = 0.05194 m = 5.194 cm
Answer
x = 5.194 cm
9.Momentum & collisions
Answer: ΔK = 36831 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 700·12/2600 = 3.231 m/s
Kinetic energy before and after
Kbefore = ½·700·12² = 50400 J
Kafter = ½·2600·3.231² = 13569 J
Energy lost
ΔK = 50400 − 13569 = 36831 J
Answer
ΔK = 36831 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: Favg = 475 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.25·(19 + 19) = 9.5 N·s
Average force
Favg = J/Δt = 9.5/0.02 = 475 N
Answer
Favg = 475 N
11.Hydrostatic force
Answer: F = 49.66 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 1.5/2 = 2.25 m
A = H·b = 1.5·1.5 = 2.25 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.25·2.25 = 49.66 kN
Answer
F = 49.66 kN
12.Hydrostatic force
Answer: ycp = 4.667 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 3/2 = 4.5 m
A = H·b = 3·3 = 9 m²
Resultant force
F = ρ·g·yc·A = 1025·9.81·4.5·9 = 407.2 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(100/200)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 625 + 273.15 = 898.1 K
TL = 40 + 273.15 = 313.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 313.1/898.1 = 65.13 %
Answer
ηmax = 65.13 %
18.Heat engines & refrigerators
Answer: Tm = 470 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 900 + 273.15 = 1173 K
TL = 40 + 273.15 = 313.1 K
Equal work
W = Q·(1 − Tlow/Thigh) and Q/T is the same at every reservoir, so W is proportional to the temperature drop.
Tm = (1173 + 313.1)/2 = 743.2 K = 470 °C
Answer
Tm = 470 °C
19.Waves, sound & optics
Answer: β2 = 57.96 dB
Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).
Intensity ratio
I₂/I₁ = (1/4)² = 0.0625
New level
β₂ = 70 + 10·log₁₀(0.0625) = 57.96 dB
Answer
β2 = 57.96 dB
Every doubling of the distance lowers the level by about 6 dB.
20.Waves, sound & optics
Answer: di = −20 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.