Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 80 km/h brakes with a constant deceleration of 6 m/s² until it stops. Find the braking distance s.
v₀ = 80 km/ha = −6 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 13 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 13 m/sh₀ = 20 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 50 kg box is pushed up a ramp at 25° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the pushing force F.
m = 50 kgθ = 25°μ = 0.15g = 9.81 m/s²
F = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 110 N pulls the front 11 kg block; the 6 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 6 kgm2 = 11 kgF = 110 Nμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched at 55° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 34 m/sθ = 55°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 34 m/s and 55° above the horizontal from the top of a 20 m cliff. Ignore air resistance and use g = 9.81 m/s². Find the greatest height H above the ground at the foot of the cliff.
v₀ = 34 m/sθ = 55°h = 20 mg = 9.81 m/s²
H = m
7.Work & energyMedium
A 1000 kg car drives up a 3° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 700 N. Find the power P the wheels must deliver, in kW.
A 4 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.3) and then runs onto a spring (k = 4000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 4 kgh = 2.5 mL = 3 mμ = 0.3k = 4000 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 3 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 3 kgm2 = 1 kgv1 = 9 m/sv2 = 0
v′2 = m/s
10.Momentum & collisionsHard
A 0.4 kg ball hits a wall at 28 m/s and bounces straight back at 17 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.4 kgvin = 28 m/svout = 17 m/sΔt = 20 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 2 mH = 3 mb = 1.5 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
Water flows through a horizontal venturi meter with an inlet diameter of 250 mm and a throat diameter of 125 mm. The pressure at the inlet is 58 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 100 mm and a gauge pressure of 140 kPa. The nozzle exit diameter is 40 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².
A heat engine works between a hot reservoir at 450 °C and a cold reservoir at 10 °C. It takes in 3100 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 450 °CTL = 10 °CQH = 3100 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A heat engine takes in 900 kJ of heat from a reservoir at 900 °C, produces 396 kJ of work and rejects the rest to a reservoir at 40 °C, per cycle. Find the total entropy generated Sgen per cycle.
TH = 900 °CTL = 40 °CQH = 900 kJW = 396 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
Light inside a transparent block is totally reflected at the boundary with glycerol (n = 1.47) for every angle of incidence above 24.4°. Find the refractive index n1 of the block.
θc = 24.4°n2 = 1.47
n1 =
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.5 and a cladding with n₂ = 1.47. Find its numerical aperture NA.
n1 = 1.5n2 = 1.47
NA =
3Solutions
1.Kinematics
Answer: s = 41.15 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 80/3.6 = 22.22 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 22.22²/(2·6) = 41.15 m
Answer
s = 41.15 m
2.Kinematics
Answer: t = 3.74 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−20 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 20 = 0
Solve the quadratic
Only the positive root is physical.
t = (13 + √(13² + 2·9.81·20))/9.81 = 3.74 s
Answer
t = 3.74 s
3.Newton’s laws
Answer: F = 274 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 207.3 + 66.68 = 274 N
Answer
F = 274 N
4.Newton’s laws
Answer: T = 38.82 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: x = 110.7 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 34·cos 55° = 19.5 m/s
vy = v0·sin θ = 34·sin 55° = 27.85 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·27.85/9.81 = 5.678 s
Horizontal distance
x = vx·t = 19.5·5.678 = 110.7 m
Answer
x = 110.7 m
6.Projectile motion
Answer: H = 59.54 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Vertical launch speed
vy = 34·sin 55° = 27.85 m/s
Rise above the cliff
Δh = vy²/(2g) = 27.85²/(2·9.81) = 39.54 m
Height above the ground
H = 20 + 39.54 = 59.54 m
Answer
H = 59.54 m
7.Work & energy
Answer: P = 18.2 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1000·9.81 = 9810 N
mg·sin θ = 9810·sin 3° = 513.4 N
F = 513.4 + 700 = 1213 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1213·15 = 18201 W = 18.2 kW
Answer
P = 18.2 kW
8.Work & energy
Answer: v = 5.603 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 39.24·(2.5 − 0.3·3) = 62.78 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·1.6) = 5.603 m/s
Answer
v = 5.603 m/s
9.Momentum & collisions
Answer: v′2 = 13.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3 − 1)/(3 + 1)·9 = 4.5 m/s
v′2 = 2·3/(3 + 1)·9 = 13.5 m/s
Answer
v′2 = 13.5 m/s
10.Momentum & collisions
Answer: J = 18 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.4·(17 + 28) = 18 N·s
Answer
J = 18 N·s
11.Hydrostatic force
Answer: F = 134.9 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2.5/2 = 2.75 m
A = H·b = 2.5·2 = 5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.75·5 = 134.9 kN
Answer
F = 134.9 kN
12.Hydrostatic force
Answer: F = 136 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2 + 3/2 = 3.5 m
A = H·b = 3·1.5 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·3.5·4.5 = 136 kN
Answer
F = 136 kN
13.Continuity & Bernoulli
Answer: Q = 136.5 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(125/250)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Exit velocity
β = 40/100 = 0.4
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·140000/(1000·0.9744)) = 16.95 m/s
Height of the jet
Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.
H = v2²/(2g) = 16.95²/(2·9.81) = 14.65 m
Answer
H = 14.65 m
15.Ideal gas law
Answer: V = 140.7 L
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = 220/28.01 = 7.854 mol
T = 50 + 273.15 = 323.1 K
Volume
V = nRT/P = 7.854·8.314·323.1/150 = 140.7 L
Answer
V = 140.7 L
16.Ideal gas law
Answer: ρ = 5.791 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 60 + 273.15 = 333.1 K
Density
ρ = 1000·16.04/(8.314·333.1) = 5.791 kg/m³
Answer
ρ = 5.791 kg/m³
17.Heat engines & refrigerators
Answer: Wmax = 1886 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 450 + 273.15 = 723.1 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/723.1 = 60.84 %
Maximum work
Wmax = ηmax·QH = 0.6084·3100 = 1886 kJ
Answer
Wmax = 1886 kJ
18.Heat engines & refrigerators
Answer: Sgen = 0.8423 kJ/K
Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.
Heat rejected
QL = QH − W = 900 − 396 = 504 kJ
Absolute temperatures
TH = 900 + 273.15 = 1173 K
TL = 40 + 273.15 = 313.1 K
Entropy changes of the reservoirs
ΔSH = −900/1173 = −0.7672 kJ/K
ΔSL = 504/313.1 = 1.609 kJ/K
Sgen = 1.609 − 0.7672 = 0.8423 kJ/K
Answer
Sgen = 0.8423 kJ/K
Sgen > 0, so the engine is possible but irreversible.
19.Waves, sound & optics
Answer: n1 = 3.558
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Refractive index of the block
n₁ = n₂/sin θc = 1.47/0.4131 = 3.558
Answer
n1 = 3.558
20.Waves, sound & optics
Answer: NA = 0.2985
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.