Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 16 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 16 m/sapolice = 3.5 m/s²v0,police = 0
d = m
2.KinematicsHard
A ball is thrown straight up at 11 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 11 m/sh₀ = 15 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 14 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 14 kgθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 6.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 6.5 kgm2 = 3.5 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 16 m/sθ = 45°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 10 m/sθ = 25°h = 15 mg = 9.81 m/s²
x = m
7.Work & energyMedium
An 800 kg car drives up a 4° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 700 N. Find the power P the wheels must deliver, in kW.
A 2.5 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4 m long (μ = 0.2) and then runs onto a spring (k = 1500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2.5 kgh = 3 mL = 4 mμ = 0.2k = 1500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 4.5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 4.5 kgm2 = 0.5 kgv1 = 2 m/sv2 = 0
v′2 = m/s
10.Momentum & collisionsHard
A 0.2 kg ball hits a wall at 30 m/s and bounces straight back at 11 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.2 kgvin = 30 m/svout = 11 m/sΔt = 10 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 75 mm to 40 mm. In the wide section the pressure is 370 kPa and the velocity is 2.25 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 150 mm to 100 mm while rising 4 m. At section 1 the pressure is 160 kPa and the velocity is 1.75 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine receives heat from a source at 900 °C and rejects heat to the surroundings at 35 °C. Its actual thermal efficiency is 52%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.
TH = 900 °CTL = 35 °Cη = 52%
ηII = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 5 °C in a kitchen at 30 °C, removing heat from the cold space at 4 kW. Find the minimum power input Ẇmin.
TH = 30 °CTL = 5 °CQ̇L = 4 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
A small source sends sound equally in all directions. The level is 85 dB at 5 m from it. Find the level β2 at 15 m, ignoring absorption and reflections.
β1 = 85 dBr1 = 5 mr2 = 15 m
β2 = dB
20.Waves, sound & opticsHard
Light of wavelength 550 nm falls on two slits 0.3 mm apart. The screen is 1.2 m away. Find the distance y4 from the central bright fringe to bright fringe number 4.
λ = 550 nmd = 0.3 mmL = 1.2 mm = 4
y4 = mm
3Solutions
1.Kinematics
Answer: d = 146.3 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·16/3.5 = 9.143 s
Distance
d = v·t = 16·9.143 = 146.3 m
Answer
d = 146.3 m
At that moment the police car moves at 2v = 32 m/s.
2.Kinematics
Answer: hmax = 21.17 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 11²/(2·9.81) = 6.167 m
Height above the ground
hmax = 15 + 6.167 = 21.17 m
Answer
hmax = 21.17 m
3.Newton’s laws
Answer: a = 4.803 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 16·cos 45° = 11.31 m/s
vy = v0·sin θ = 16·sin 45° = 11.31 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·11.31/9.81 = 2.307 s
Horizontal distance
x = vx·t = 11.31·2.307 = 26.1 m
Answer
x = 26.1 m
6.Projectile motion
Answer: x = 20.23 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 25° = 9.063 m/s
vy = v0·sin θ = 10·sin 25° = 4.226 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 15 + 4.226·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.226 + √(17.86 + 294.3))/9.81 = 2.232 s
Horizontal distance
x = vx·t = 9.063·2.232 = 20.23 m
Answer
x = 20.23 m
7.Work & energy
Answer: P = 18.71 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 800·9.81 = 7848 N
mg·sin θ = 7848·sin 4° = 547.4 N
F = 547.4 + 700 = 1247 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1247·15 = 18712 W = 18.71 kW
Answer
P = 18.71 kW
8.Work & energy
Answer: x = 26.82 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 24.53·(3 − 0.2·4) = 53.96 J
Maximum compression
½kx² = 53.96 → x = √(2·53.96/1500) = 0.2682 m = 26.82 cm
Answer
x = 26.82 cm
9.Momentum & collisions
Answer: v′2 = 3.6 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4.5 − 0.5)/(4.5 + 0.5)·2 = 1.6 m/s
v′2 = 2·4.5/(4.5 + 0.5)·2 = 3.6 m/s
Answer
v′2 = 3.6 m/s
10.Momentum & collisions
Answer: J = 8.2 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.2·(11 + 30) = 8.2 N·s
Answer
J = 8.2 N·s
11.Hydrostatic force
Answer: F = 183.9 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 2.5/2 = 3.75 m
A = H·b = 2.5·2 = 5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.75·5 = 183.9 kN
Answer
F = 183.9 kN
12.Hydrostatic force
Answer: ycp = 1.556 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 1/2 = 1.5 m
A = H·b = 1·1.5 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·1.5·1.5 = 22.07 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 900 + 273.15 = 1173 K
TL = 35 + 273.15 = 308.1 K
Carnot efficiency
ηCarnot = 1 − 308.1/1173 = 73.73 %
Second-law efficiency
ηII = η/ηCarnot = 52/73.73 = 70.52 %
Answer
ηII = 70.52 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.3595 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 4/11.13 = 0.3595 kW
Answer
Ẇmin = 0.3595 kW
19.Waves, sound & optics
Answer: β2 = 75.46 dB
Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).
Intensity ratio
I₂/I₁ = (5/15)² = 0.1111
New level
β₂ = 85 + 10·log₁₀(0.1111) = 75.46 dB
Answer
β2 = 75.46 dB
Every doubling of the distance lowers the level by about 6 dB.
20.Waves, sound & optics
Answer: y4 = 8.8 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …