Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 72 km/h sees an obstacle. Her reaction time is 1.5 s, after which the car brakes with a constant deceleration of 4.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 72 km/htr = 1.5 sa = −4.5 m/s²
d = m
2.KinematicsHard
Ball A is dropped from rest from a height of 35 m. At the same instant ball B is thrown straight up from the ground directly below at 26 m/s. Ignore air resistance and use g = 9.81 m/s². At what height y above the ground do they meet?
H = 35 mv0B = 26 m/sg = 9.81 m/s²
y = m
3.Newton’s lawsMedium
A 40 kg sled is pulled across level snow by a rope at 15° above the horizontal with a force of 180 N. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the acceleration a of the sled.
m = 40 kgF = 180 Nθ = 15°μ = 0.4g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 1 kgm2 = 1 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 25° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 10 m/sθ = 25°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 50 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 24 m/sθ = 45°h = 50 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A 2000 kg car drives up a 6° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 650 N. Find the power P the wheels must deliver, in kW.
A 0.5 kg cart is released from rest at a height of 5.6 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 0.5 kgh = 5.6 mR = 2 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 4 kg glider moving at 8 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4 kgm2 = 5 kgv1 = 8 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 0.4 kg ball hits a wall at 16 m/s and bounces straight back at 6 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.
m = 0.4 kgvin = 16 m/svout = 6 m/sΔt = 40 ms
Favg = N
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of glycerin, with its top edge 3 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water drains from a large open tank through a sharp-edged orifice with a diameter of 40 mm. The water level is kept 1 m above the orifice and the discharge coefficient is 0.62. Find the flow rate Q. Use g = 9.81 m/s².
d = 40 mmh = 1 mCd = 0.62g = 9.81 m/s²
Q = L/s
14.Continuity & BernoulliHard
A hose with an inner diameter of 32 mm siphons water from an open tank. The highest point C of the hose is 1.5 m above the water surface, and the outlet (open to the air) is 5 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the absolute pressure pC at point C. The atmospheric pressure is 101.3 kPa.
A heat engine works between a hot reservoir at 200 °C and a cold reservoir at 10 °C. It takes in 3200 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 200 °CTL = 10 °CQH = 3200 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A heat pump keeps a house at 20 °C while it is -10 °C outside, delivering 12 kW of heat to the house. Find the minimum power input Ẇmin.
TH = 20 °CTL = -10 °CQ̇H = 12 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
A string fixed at both ends is 0.75 m long; waves travel on it at 240 m/s. Find the frequency f1 of its fundamental (first harmonic).
v = 240 m/sn = 1L = 0.75 m
f1 = Hz
20.Waves, sound & opticsHard
Light of wavelength 550 nm falls at right angles on a grating with 800 lines per millimetre. Find the angle θ1 of the order-1 maximum.
N = 800 mm⁻¹λ = 550 nmm = 1
θ1 = °
3Solutions
1.Kinematics
Answer: d = 74.44 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 72/3.6 = 20 m/s
Reaction distance
d1 = v₀·tr = 20·1.5 = 30 m
Braking distance
d2 = v₀²/(2a) = 20²/(2·4.5) = 44.44 m
Total
d = 30 + 44.44 = 74.44 m
Answer
d = 74.44 m
2.Kinematics
Answer: y = 26.11 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Meeting time
Up is positive, the ground is y = 0.
35 − ½g·t² = 26·t − ½g·t² → t = 35/26 = 1.346 s
Meeting height
y = 26·1.346 − ½·9.81·1.346² = 26.11 m
Answer
y = 26.11 m
3.Newton’s laws
Answer: a = 0.8885 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Normal force
N = m·g − F·sin θ = 392.4 − 180·sin 15° = 345.8 N
Horizontal forces
m·a = F·cos θ − μ·N = 173.9 − 138.3
a = 35.54/40 = 0.8885 m/s²
Answer
a = 0.8885 m/s²
4.Newton’s laws
Answer: a = 3.433 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 25° = 9.063 m/s
vy = v0·sin θ = 10·sin 25° = 4.226 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·4.226/9.81 = 0.8616 s
Answer
t = 0.8616 s
6.Projectile motion
Answer: t = 5.361 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 24·cos 45° = 16.97 m/s
vy = v0·sin θ = 24·sin 45° = 16.97 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 50 + 16.97·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (16.97 + √(288 + 981))/9.81 = 5.361 s
Answer
t = 5.361 s
7.Work & energy
Answer: P = 40.51 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 2000·9.81 = 19620 N
mg·sin θ = 19620·sin 6° = 2051 N
F = 2051 + 650 = 2701 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 2701·15 = 40513 W = 40.51 kW
Answer
P = 40.51 kW
8.Work & energy
Answer: N = 2.943 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(5.6 − 4) = 31.39 m²/s²
Forces at the top
m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·31.39/2 − 4.905 = 2.943 N
Answer
N = 2.943 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′1 = −0.8889 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4 − 5)/(4 + 5)·8 = −0.8889 m/s
v′2 = 2·4/(4 + 5)·8 = 7.111 m/s
Answer
v′1 = −0.8889 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: Favg = 220 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.4·(6 + 16) = 8.8 N·s
Average force
Favg = J/Δt = 8.8/0.04 = 220 N
Answer
Favg = 220 N
11.Hydrostatic force
Answer: F = 165.5 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 1.5/2 = 3.75 m
A = H·b = 1.5·3 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.75·4.5 = 165.5 kN
Answer
F = 165.5 kN
12.Hydrostatic force
Answer: ycp = 4.083 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 2/2 = 4 m
A = H·b = 2·1.5 = 3 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·4·3 = 148.3 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 1.5·2³/12 = 1 m⁴
ycp = yc + Ic/(yc·A) = 4 + 1/(4·3) = 4.083 m
Answer
ycp = 4.083 m
13.Continuity & Bernoulli
Answer: Q = 3.451 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Ideal jet velocity
√(2gh) = √(2·9.81·1) = 4.429 m/s
Actual flow rate
The discharge coefficient accounts for the contraction of the jet and friction at the edge.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Velocity in the hose
Surface and outlet are both open to the air, so the pressure terms cancel.
If this pressure falls to the vapour pressure of the water, the siphon stops working.
15.Ideal gas law
Answer: P = 1041 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 440/32 = 13.75 mol
T = 0 + 273.15 = 273.1 K
Pressure
P = nRT/V = 13.75·8.314·273.1/0.03 = 1041 kPa
Answer
P = 1041 kPa
16.Ideal gas law
Answer: V2 = 12.19 L
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 308.1 K, T2 = 483.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 10·(350/450)·(483.1/308.1) = 12.19 L
Answer
V2 = 12.19 L
17.Heat engines & refrigerators
Answer: Wmax = 1285 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 200 + 273.15 = 473.1 K
TL = 10 + 273.15 = 283.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 283.1/473.1 = 40.16 %
Maximum work
Wmax = ηmax·QH = 0.4016·3200 = 1285 kJ
Answer
Wmax = 1285 kJ
18.Heat engines & refrigerators
Answer: Ẇmin = 1.228 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇H/COP = 12/9.772 = 1.228 kW
Answer
Ẇmin = 1.228 kW
19.Waves, sound & optics
Answer: f1 = 160 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 2L/n = 2·0.75/1 = 1.5 m
Frequency
f = v/λ = 240/1.5 = 160 Hz
Answer
f1 = 160 Hz
20.Waves, sound & optics
Answer: θ1 = 26.1 °
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …