Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A plane starts from rest and accelerates uniformly at 4 m/s² along a runway. Find its speed v after 2000 m.
v₀ = 0a = 4 m/s²s = 2000 m
v = m/s
2.KinematicsHard
A ball is thrown straight up at 17 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 17 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 6 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 6 kgθ = 20°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 150 N pulls the front 8 kg block; the 6 kg block is towed behind. The coefficient of kinetic friction is 0.1 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 6 kgm2 = 8 kgF = 150 Nμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is kicked from level ground at 36 m/s and 55° above the horizontal towards a wall 99 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 36 m/sθ = 55°x = 99 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 12 m/sθ = 35°h = 5 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.25. Find its speed v after it has slid 18 m along the slope.
θ = 40°μ = 0.25d = 18 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 10 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2 m long (μ = 0.1) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 10 kgh = 2.5 mL = 2 mμ = 0.1k = 2000 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 2.5 kg glider moving at 5 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 2.5 kgm2 = 1 kgv1 = 5 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 1700 kg car runs into a parked 1300 kg car. The wrecks lock together and skid 16 m before stopping. The coefficient of kinetic friction between tyres and road is 0.6. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of glycerin, with its top edge 1 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water drains from a large open tank through a sharp-edged orifice with a diameter of 20 mm. The water level is kept 6 m above the orifice and the discharge coefficient is 0.65. Find the flow rate Q. Use g = 9.81 m/s².
d = 20 mmh = 6 mCd = 0.65g = 9.81 m/s²
Q = L/s
14.Continuity & BernoulliHard
Water flows up through a pipe that narrows from 100 mm to 75 mm while rising 3 m. At section 1 the pressure is 100 kPa and the velocity is 2.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A reversible refrigerator keeps a cold room at 2 °C by removing 4.5 kW of heat, and rejects heat to the surroundings at 28 °C. Find the rate Q̇H at which it rejects heat.
TL = 2 °CTH = 28 °CQ̇L = 4.5 kW
Q̇H = kW
18.Heat engines & refrigeratorsHard
A Carnot heat engine receives 140 kW of heat from a source at 400 °C and rejects heat to the surroundings at 20 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at -10 °C and also rejects heat to the surroundings at 20 °C. Find the rate Q̇L at which heat is removed from the freezer.
TH = 400 °CT0 = 20 °CTL = -10 °CQ̇H = 140 kW
Q̇L = kW
19.Waves, sound & opticsMedium
A pipe open at both ends is 1.5 m long. The speed of sound is 343 m/s. Find the frequency f1 of its fundamental (first harmonic).
v = 343 m/sn = 1L = 1.5 m
f1 = Hz
20.Waves, sound & opticsHard
Light of wavelength 500 nm passes through a single slit 0.08 mm wide. Find the width w of the central bright maximum on a screen 1.5 m away (between the first dark fringes on either side).
λ = 500 nma = 0.08 mmL = 1.5 m
w = mm
3Solutions
1.Kinematics
Answer: v = 126.5 m/s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Speed after the distance
v = √(2·a·s) = √(2·4·2000) = 126.5 m/s
Answer
v = 126.5 m/s
(455.4 km/h)
2.Kinematics
Answer: t = 5.073 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−40 = 17·t − ½·9.81·t²
4.905·t² − 17·t − 40 = 0
Solve the quadratic
Only the positive root is physical.
t = (17 + √(17² + 2·9.81·40))/9.81 = 5.073 s
Answer
t = 5.073 s
3.Newton’s laws
Answer: a = 0.5897 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 36·cos 55° = 20.65 m/s
t = x/vx = 99/20.65 = 4.794 s
Height at that time
y = 29.49·4.794 − ½·9.81·4.794² = 28.64 m
Answer
y = 28.64 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: x = 18.98 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 12·cos 35° = 9.83 m/s
vy = v0·sin θ = 12·sin 35° = 6.883 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 5 + 6.883·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (6.883 + √(47.37 + 98.1))/9.81 = 1.931 s
Horizontal distance
x = vx·t = 9.83·1.931 = 18.98 m
Answer
x = 18.98 m
7.Work & energy
Answer: v = 12.62 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·18·(0.6428 − 0.25·0.766)) = 12.62 m/s
Answer
v = 12.62 m/s
8.Work & energy
Answer: v = 6.718 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 98.1·(2.5 − 0.1·2) = 225.6 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·2.3) = 6.718 m/s
Answer
v = 6.718 m/s
9.Momentum & collisions
Answer: v′1 = 2.143 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2.5 − 1)/(2.5 + 1)·5 = 2.143 m/s
v′2 = 2·2.5/(2.5 + 1)·5 = 7.143 m/s
Answer
v′1 = 2.143 m/s
10.Momentum & collisions
Answer: v1 = 24.22 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Ideal jet velocity
√(2gh) = √(2·9.81·6) = 10.85 m/s
Actual flow rate
The discharge coefficient accounts for the contraction of the jet and friction at the edge.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 298.1 K, T2 = 413.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 2·(200/800)·(413.1/298.1) = 0.6929 L
Answer
V2 = 0.6929 L
17.Heat engines & refrigerators
Answer: Q̇H = 4.925 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 28 + 273.15 = 301.1 K
TL = 2 + 273.15 = 275.1 K
Reversible heat ratio
Q̇H = Q̇L·TH/TL = 4.5·301.1/275.1 = 4.925 kW
Answer
Q̇H = 4.925 kW
Power input: Ẇ = 0.4252 kW.
18.Heat engines & refrigerators
Answer: Q̇L = 693.2 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 400 + 273.15 = 673.1 K
T0 = 20 + 273.15 = 293.1 K
TL = -10 + 273.15 = 263.1 K
Engine work
η = 1 − 293.1/673.1 = 0.5645
Ẇ = 0.5645·140 = 79.03 kW
Heat removed by the refrigerator
COPR = 263.1/(293.1 − 263.1) = 8.772
Q̇L = 8.772·79.03 = 693.2 kW
Answer
Q̇L = 693.2 kW
19.Waves, sound & optics
Answer: f1 = 114.3 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 2L/n = 2·1.5/1 = 3 m
Frequency
f = v/λ = 343/3 = 114.3 Hz
Answer
f1 = 114.3 Hz
20.Waves, sound & optics
Answer: w = 18.75 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …