Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 36 km/h brakes with a constant deceleration of 5 m/s² until it stops. Find the braking distance s.
v₀ = 36 km/ha = −5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 10 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 10 m/sh₀ = 5 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 5 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 5 kgθ = 30°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 6.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 6.5 kgm2 = 3 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 10 m/sθ = 20°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 5 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 23 m/sθ = 55°h = 5 mg = 9.81 m/s²
t = s
7.Work & energyMedium
A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Find its speed v after it has slid 3 m along the slope.
θ = 45°μ = 0.2d = 3 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 5 kg block starts from rest at the bottom of a 25° slope and is pulled up the slope by a constant force of 35 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 10 m up the slope.
A 6 kg projectile moving horizontally at 21 m/s explodes into two fragments that move along the same line. The 2 kg fragment continues forwards at 70 m/s. Find the velocity v′2 of the 4 kg fragment (positive in the original direction).
M = 6 kgu = 21 m/sm1 = 2 kgv′1 = 70 m/sm2 = 4 kg
v′2 = m/s
10.Momentum & collisionsHard
At a crossing a 1800 kg car travelling east at 9 m/s collides with an 800 kg car travelling north at 15 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1800 kgv1 = 9 m/s (E)m2 = 800 kgv2 = 15 m/s (N)
θ = °
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of seawater, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal pipe that narrows from 100 mm to 50 mm. In the wide section the pressure is 300 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 100 mm and a gauge pressure of 50 kPa. The nozzle exit diameter is 25 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².
A reversible (Carnot) heat engine takes in 2700 kJ of heat from a reservoir at 675 °C and rejects 863 kJ per cycle. Find the temperature TL of the cold reservoir in °C.
TH = 675 °CQH = 2700 kJQL = 863 kJ
TL = °C
18.Heat engines & refrigeratorsHard
A heat pump keeps a house at 21 °C while it is -5 °C outside, delivering 6 kW of heat to the house. Find the minimum power input Ẇmin.
TH = 21 °CTL = -5 °CQ̇H = 6 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An object stands 8 cm in front of a thin diverging lens with a focal length of 10 cm. Find the image distance di. Use the sign convention 1/f = 1/do + 1/di (f < 0 for a diverging lens, di < 0 for a virtual image).
do = 8 cmf = −10 cm
di = cm
20.Waves, sound & opticsHard
An object is 50 cm in front of a convex mirror with a radius of curvature of 10 cm. Find the image distance di, positive for an image in front of the mirror (real) and negative for one behind it (virtual).
do = 50 cmR = 10 cm
di = cm
3Solutions
1.Kinematics
Answer: s = 10 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 36/3.6 = 10 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 10²/(2·5) = 10 m
Answer
s = 10 m
2.Kinematics
Answer: hmax = 10.1 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 10²/(2·9.81) = 5.097 m
Height above the ground
hmax = 5 + 5.097 = 10.1 m
Answer
hmax = 10.1 m
3.Newton’s laws
Answer: a = 2.781 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 20° = 9.397 m/s
vy = v0·sin θ = 10·sin 20° = 3.42 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·3.42/9.81 = 0.6973 s
Answer
t = 0.6973 s
6.Projectile motion
Answer: t = 4.09 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 23·cos 55° = 13.19 m/s
vy = v0·sin θ = 23·sin 55° = 18.84 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 5 + 18.84·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.84 + √(355 + 98.1))/9.81 = 4.09 s
Answer
t = 4.09 s
7.Work & energy
Answer: v = 5.77 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.7071 − 0.2·0.7071)) = 5.77 m/s
Answer
v = 5.77 m/s
8.Work & energy
Answer: v = 5.514 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 5·9.81 = 49.05 N
mg·sin θ = 20.73 N
μ·mg·cos θ = 6.668 N
Work–energy
½mv² = (35 − 27.4)·10 = 76.02 J
v = √(2·76.02/5) = 5.514 m/s
Answer
v = 5.514 m/s
9.Momentum & collisions
Answer: v′2 = −3.5 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 6·21 = 126 kg·m/s
Momentum after
126 = 2·70 + 4·v′2
v′2 = (126 − 140)/4 = −3.5 m/s
Answer
v′2 = −3.5 m/s
The minus sign means the second fragment flies backwards.
10.Momentum & collisions
Answer: θ = 36.53 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1800·9 = 16200 kg·m/s
py = 800·15 = 12000 kg·m/s
Direction
tan θ = py/px = 0.7407 → θ = 36.53°
Answer
θ = 36.53°
11.Hydrostatic force
Answer: F = 143.5 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1.5/2 = 3.25 m
A = H·b = 1.5·3 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.25·4.5 = 143.5 kN
Answer
F = 143.5 kN
12.Hydrostatic force
Answer: F = 45.25 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1/2 = 3 m
A = H·b = 1·1.5 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1025·9.81·3·1.5 = 45.25 kN
Answer
F = 45.25 kN
13.Continuity & Bernoulli
Answer: p2 = 295.8 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Exit velocity
β = 25/100 = 0.25
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·50000/(1000·0.9961)) = 10.02 m/s
Height of the jet
Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.
H = v2²/(2g) = 10.02²/(2·9.81) = 5.117 m
Answer
H = 5.117 m
15.Ideal gas law
Answer: V = 48.45 L
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = 370/39.95 = 9.262 mol
T = 10 + 273.15 = 283.1 K
Volume
V = nRT/P = 9.262·8.314·283.1/450 = 48.45 L
Answer
V = 48.45 L
16.Ideal gas law
Answer: ρ = 5.814 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 0 + 273.15 = 273.1 K
Density
ρ = 300·44.01/(8.314·273.1) = 5.814 kg/m³
Answer
ρ = 5.814 kg/m³
17.Heat engines & refrigerators
Answer: TL = 29.91 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperature of the source
TH = 675 + 273.15 = 948.1 K
Reversible heat ratio
TL = TH·QL/QH = 948.1·863/2700 = 303.1 K = 29.91 °C
Answer
TL = 29.91 °C
18.Heat engines & refrigerators
Answer: Ẇmin = 0.5303 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇H/COP = 6/11.31 = 0.5303 kW
Answer
Ẇmin = 0.5303 kW
19.Waves, sound & optics
Answer: di = −4.444 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/(−10) − 1/8
di = −4.444 cm
Ray diagram
virtual, on the same side as the object
Answer
di = −4.444 cm
20.Waves, sound & optics
Answer: di = −4.545 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.