Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 45 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.
v₀ = 45 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 38 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 38 m/s²t1 = 2.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 15 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 15 kgθ = 30°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 9.5 kgm2 = 3.5 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 40° above the horizontal and lands 60 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 40°R = 60 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is thrown from ground level at 17 m/s and 70° above the horizontal. It lands on the flat roof of a building 9 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 17 m/sθ = 70°hroof = 9 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 2 kg block slides 3 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.15. Find the work Wf done against friction.
m = 2 kgθ = 45°μ = 0.15d = 3 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
A 1 kg cart is released from rest at a height of 3.2 m on a smooth track that leads into a vertical circular loop of radius 1 m. Find the speed v of the cart at the top of the loop.
m = 1 kgh = 3.2 mR = 1 mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 2 kg glider moving at 6 m/s makes a perfectly elastic head-on collision with a 1 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 2 kgm2 = 1 kgv1 = 6 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 0.45 kg ball hits a wall at 12 m/s and bounces straight back at 17 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.
m = 0.45 kgvin = 12 m/svout = 17 m/sΔt = 10 ms
Favg = N
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of glycerin, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal pipe that narrows from 100 mm to 40 mm. In the wide section the pressure is 130 kPa and the velocity is 1.25 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 200 mm to 50 mm while rising 8 m. At section 1 the pressure is 350 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 550 °C and a cold reservoir at 15 °C. Find the highest possible thermal efficiency ηmax.
TH = 550 °CTL = 15 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat pump delivers 18.5 kW of heat to a heating system at 21 °C, taking heat from a source at -5 °C. Its actual COP is 40% of the Carnot COP between these temperatures. Find the electrical power Ẇ it uses.
TH = 21 °CTL = -5 °CηII = 40%Q̇H = 18.5 kW
Ẇ = kW
19.Waves, sound & opticsMedium
A pipe open at both ends must have its harmonic number 2 at 457 Hz. The speed of sound is 343 m/s. Find the length L of the pipe.
v = 343 m/sn = 2f2 = 457 Hz
L = m
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.5 and a cladding with n₂ = 1.42. Find the largest angle θa to the fibre axis at which light from air can enter the end of the fibre and still be guided by total internal reflection.
n1 = 1.5n2 = 1.42n0 = 1.00
θa = °
3Solutions
1.Kinematics
Answer: s = 17.36 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 45/3.6 = 12.5 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·4.5) = 17.36 m
Answer
s = 17.36 m
2.Kinematics
Answer: hmax = 578.7 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 38·2.5 = 95 m/s
h₁ = ½·38·2.5² = 118.8 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 95²/(2·9.81) = 460 m
hmax = 118.8 + 460 = 578.7 m
Answer
hmax = 578.7 m
3.Newton’s laws
Answer: a = 3.631 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·60/sin 80°) = 24.45 m/s
Answer
v0 = 24.45 m/s
6.Projectile motion
Answer: x = 14.72 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 5.814 m/s, vy = 15.97 m/s
Time to land on the roof
Larger root: the ball is descending.
9 = 15.97·t − 4.905·t²
t = (15.97 + √(15.97² − 2·9.81·9))/9.81 = 2.532 s
Horizontal distance
x = vx·t = 5.814·2.532 = 14.72 m
Answer
x = 14.72 m
7.Work & energy
Answer: Wf = 6.243 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 19.62·0.7071 = 13.87 N
F = μN = 0.15·13.87 = 2.081 N
Work against friction
Wf = F·d = 2.081·3 = 6.243 J
Answer
Wf = 6.243 J
8.Work & energy
Answer: v = 4.852 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(3.2 − 2) = 23.54 m²/s²
v = 4.852 m/s
Answer
v = 4.852 m/s
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′1 = 2 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (2 − 1)/(2 + 1)·6 = 2 m/s
v′2 = 2·2/(2 + 1)·6 = 8 m/s
Answer
v′1 = 2 m/s
10.Momentum & collisions
Answer: Favg = 1305 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.45·(17 + 12) = 13.05 N·s
Average force
Favg = J/Δt = 13.05/0.01 = 1305 N
Answer
Favg = 1305 N
11.Hydrostatic force
Answer: F = 208.5 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 2.5/2 = 4.25 m
A = H·b = 2.5·2 = 5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.25·5 = 208.5 kN
Answer
F = 208.5 kN
12.Hydrostatic force
Answer: F = 90.39 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1.5/2 = 3.25 m
A = H·b = 1.5·1.5 = 2.25 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·3.25·2.25 = 90.39 kN
Answer
F = 90.39 kN
13.Continuity & Bernoulli
Answer: p2 = 100.3 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 550 + 273.15 = 823.1 K
TL = 15 + 273.15 = 288.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 288.1/823.1 = 64.99 %
Answer
ηmax = 64.99 %
18.Heat engines & refrigerators
Answer: Ẇ = 4.088 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 21 + 273.15 = 294.1 K
TL = -5 + 273.15 = 268.1 K
Carnot and actual COP
COPmax = 294.1/(294.1 − 268.1) = 11.31
COP = 0.4·11.31 = 4.525
Power input
Ẇ = Q̇H/COP = 18.5/4.525 = 4.088 kW
Answer
Ẇ = 4.088 kW
19.Waves, sound & optics
Answer: L = 0.7505 m
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength
λ = v/f = 343/457 = 0.7505 m
Length
L = nλ/2 = 2·0.7505/2 = 0.7505 m
Answer
L = 0.7505 m
20.Waves, sound & optics
Answer: θa = 28.9 °
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.