Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
a = 3.75 m/s²s = 1100 m

A plane starts from rest and accelerates uniformly at 3.75 m/s² along a runway. Find its speed v after 1100 m.

v₀ = 0a = 3.75 m/s²s = 1100 m
v = m/s
2.KinematicsHard
a = 36 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 36 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 36 m/s²t1 = 2 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 18 kg

An 18 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 30°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 1 kg1 kgμ = 0.1

A 1 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 1 kgm2 = 1 kgμ = 0.1g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?50°R = 40 m

A ball is launched from level ground at 50° above the horizontal and lands 40 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 50°R = 40 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 15 mv0​ = 16 m/s55°range

A ball is launched at 55° above horizontal from the top of a 15 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 16 m/sθ = 55°h = 15 mg = 9.81 m/s²
t = s
7.Work & energyMedium
45°d = 10 mμ = 0.1

A 1 kg block slides 10 m down a slope at 45° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.

m = 1 kgθ = 45°μ = 0.1d = 10 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
5 kg3 kgμ = 0.25d = 0.5 m

A 5 kg block rests on a rough horizontal table (μ = 0.25). A light string runs from it over a smooth pulley at the edge of the table to a hanging 3 kg block. The system is released from rest. Find the speed v of the blocks after the hanging block has dropped 0.5 m.

m1 = 5 kgm2 = 3 kgμ = 0.25d = 0.5 mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
5 kg2 m/s3.5 kg

A 5 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 5 kgm2 = 3.5 kgv1 = 2 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
1400 kg19 m/s800 kg9 m/sv′ = ?

At a crossing a 1400 kg car travelling east at 19 m/s collides with an 800 kg car travelling north at 9 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.

m1 = 1400 kgv1 = 19 m/s (E)m2 = 800 kgv2 = 9 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
gated = 2 mH = 3 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 2 mH = 3 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 0.5 mH = 1.5 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 0.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.

d = 0.5 mH = 1.5 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
12d1​ = 200 mm, p1​ = 150 kPad2​ = 40 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 200 mm to 40 mm. In the wide section the pressure is 150 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 200 mmd2 = 40 mmp1 = 150 kPav1 = 0.5 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
12d1​ = 75 mm, p1​ = 130 kPad2​ = 50 mm, p2​ = ?Δz = 7 m

Water flows up through a pipe that narrows from 75 mm to 50 mm while rising 7 m. At section 1 the pressure is 130 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 75 mmd2 = 50 mmp1 = 130 kPav1 = 0.5 m/sΔz = 7 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
90 g of CO₂V = 50 LT = 35 °CP = ?

A tank of 50 L contains 90 g of CO₂ at 35 °C. Treat it as an ideal gas and find the pressure P.

m = 90 gM = 44.01 g/molV = 50 LT = 35 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
N₂, M = 28.01 g/molP = 750 kPaT = 150 °Cρ = ?

Find the density ρ of N₂ at 750 kPa and 150 °C, treating it as an ideal gas.

M = 28.01 g/molP = 750 kPaT = 150 °CR = 8.314 J/(mol·K)
ρ = kg/m³
17.Heat engines & refrigeratorsMedium
TH​ = 40 °CTL​ = 0 °CRQ̇H​ = ?Q̇L​ = 2 kWẆ

A reversible refrigerator keeps a cold room at 0 °C by removing 2 kW of heat, and rejects heat to the surroundings at 40 °C. Find the rate Q̇H at which it rejects heat.

TL = 0 °CTH = 40 °CQ̇L = 2 kW
Q̇H = kW
18.Heat engines & refrigeratorsHard
TH​ = 21 °CTL​ = 0 °CHPQ̇H​ = 11 kWQ̇L​Ẇ = ?

A heat pump keeps a house at 21 °C while it is 0 °C outside, delivering 11 kW of heat to the house. Find the minimum power input Ẇmin.

TH = 21 °CTL = 0 °CQ̇H = 11 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
75 dB?5 m25 m

A small source sends sound equally in all directions. The level is 75 dB at 5 m from it. Find the level β2 at 25 m, ignoring absorption and reflections.

β1 = 75 dBr1 = 5 mr2 = 25 m
β2 = dB
20.Waves, sound & opticsHard
λ = 550 nmθ2​ = ?

Light of wavelength 550 nm falls at right angles on a grating with 300 lines per millimetre. Find the angle θ2 of the order-2 maximum.

N = 300 mm⁻¹λ = 550 nmm = 2
θ2 = °

3Solutions

1.Kinematics

Answer: v = 90.83 m/s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Speed after the distance

v = √(2·a·s) = √(2·3.75·1100) = 90.83 m/s

Answer

v = 90.83 m/s
(327 km/h)
2.Kinematics

Answer: t = 17.62 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 36·2 = 72 m/s
h₁ = ½·36·2² = 72 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (72 + √(72² + 2·9.81·72))/9.81 = 15.62 s
t = 2 + 15.62 = 17.62 s

Answer

t = 17.62 s
3.Newton’s laws

Answer: a = 2.781 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.25·cos 30°) = 9.81·(0.5 − 0.2165) = 2.781 m/s²

Answer

a = 2.781 m/s²
4.Newton’s laws

Answer: a = 4.415 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (9.81 − 0.981)/2 = 4.415 m/s²

Answer

a = 4.415 m/s²
5.Projectile motion

Answer: v0 = 19.96 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·40/sin 100°) = 19.96 m/s

Answer

v0 = 19.96 m/s
6.Projectile motion

Answer: t = 3.537 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 16·cos 55° = 9.177 m/s
vy = v0·sin θ = 16·sin 55° = 13.11 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 15 + 13.11·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (13.11 + √(171.8 + 294.3))/9.81 = 3.537 s

Answer

t = 3.537 s
7.Work & energy

Answer: Wf = 6.937 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 9.81·0.7071 = 6.937 N
F = μN = 0.1·6.937 = 0.6937 N

Work against friction

Wf = F·d = 0.6937·10 = 6.937 J

Answer

Wf = 6.937 J
8.Work & energy

Answer: v = 1.465 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy released and lost

m₂g·d = 29.43·0.5 = 14.71 J
μ·m₁g·d = 0.25·49.05·0.5 = 6.131 J

Kinetic energy of both blocks

½(m₁ + m₂)v² = 8.584 → v = √(2·8.584/8) = 1.465 m/s

Answer

v = 1.465 m/s
9.Momentum & collisions

Answer: v′1 = 0.3529 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (5 − 3.5)/(5 + 3.5)·2 = 0.3529 m/s
v′2 = 2·5/(5 + 3.5)·2 = 2.353 m/s

Answer

v′1 = 0.3529 m/s
10.Momentum & collisions

Answer: v′ = 12.53 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1400·19 = 26600 kg·m/s
py = 800·9 = 7200 kg·m/s

Speed of the wreck

v′ = √(px² + py²)/(m1 + m2) = 27557/2200 = 12.53 m/s

Answer

v′ = 12.53 m/s
11.Hydrostatic force

Answer: F = 309 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 2 + 3/2 = 3.5 m
A = H·b = 3·3 = 9 m²
gated = 2 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·3.5·9 = 309 kN

Answer

F = 309 kN
12.Hydrostatic force

Answer: ycp = 1.4 m

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 0.5 + 1.5/2 = 1.25 m
A = H·b = 1.5·2 = 3 m²
gated = 0.5 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·1.25·3 = 32.37 kN

Centre of pressure

Pressure grows with depth, so the resultant acts below the centroid.

Ic = b·H³/12 = 2·1.5³/12 = 0.5625 m⁴
ycp = yc + Ic/(yc·A) = 1.25 + 0.5625/(1.25·3) = 1.4 m

Answer

ycp = 1.4 m
13.Continuity & Bernoulli

Answer: p2 = 72 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.5·(200/40)² = 12.5 m/s
½ρ(v1² − v2²) = ½·1000·(0.5² − 12.5²)/1000 = −78 kPa
p2 = p1 + ½ρ(v1² − v2²) = 150 + (−78) = 72 kPa

Answer

p2 = 72 kPa
14.Continuity & Bernoulli

Answer: p2 = 60.82 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.5·(75/50)² = 1.125 m/s
½ρ(v1² − v2²) = ½·1000·(0.5² − 1.125²)/1000 = −0.5078 kPa
ρgΔz = 1000·9.81·7/1000 = 68.67 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 130 + (−0.5078) − 68.67 = 60.82 kPa

Answer

p2 = 60.82 kPa
15.Ideal gas law

Answer: P = 104.8 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 90/44.01 = 2.045 mol
T = 35 + 273.15 = 308.1 K

Pressure

P = nRT/V = 2.045·8.314·308.1/0.05 = 104.8 kPa

Answer

P = 104.8 kPa
16.Ideal gas law

Answer: ρ = 5.971 kg/m³

Ideal gas density: ρ = PM/(RT).

Rearrange the gas law

PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 150 + 273.15 = 423.1 K

Density

ρ = 750·28.01/(8.314·423.1) = 5.971 kg/m³

Answer

ρ = 5.971 kg/m³
17.Heat engines & refrigerators

Answer: Q̇H = 2.293 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 40 + 273.15 = 313.1 K
TL = 0 + 273.15 = 273.1 K

Reversible heat ratio

Q̇H = Q̇L·TH/TL = 2·313.1/273.1 = 2.293 kW

Answer

Q̇H = 2.293 kW

Power input: Ẇ = 0.2929 kW.

18.Heat engines & refrigerators

Answer: Ẇmin = 0.7853 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 21 + 273.15 = 294.1 K
TL = 0 + 273.15 = 273.1 K

Best possible COP

COPHP,max = TH/(TH − TL) = 294.1/(294.1 − 273.1) = 14.01

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇H/COP = 11/14.01 = 0.7853 kW

Answer

Ẇmin = 0.7853 kW
19.Waves, sound & optics

Answer: β2 = 61.02 dB

Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).

Intensity ratio

I₂/I₁ = (5/25)² = 0.04

New level

β₂ = 75 + 10·log₁₀(0.04) = 61.02 dB

Answer

β2 = 61.02 dB

Every doubling of the distance lowers the level by about 6 dB.

20.Waves, sound & optics

Answer: θ2 = 19.27 °

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Line spacing

d = 1/300 mm = 3.333 × 10⁻⁶ m

Grating equation

sin θ = mλ/d = 2·550 × 10⁻⁹/(3.333 × 10⁻⁶) = 0.33
θ = 19.27°

Answer

θ2 = 19.27°

ExamProblems · examproblems.com/courses/physics-for-engineers