Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 120 km/h sees an obstacle. Her reaction time is 0.8 s, after which the car brakes with a constant deceleration of 6.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 120 km/htr = 0.8 sa = −6.5 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 6 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 6 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 3 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 3 kgθ = 40°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
An 8 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 8 kgm2 = 2 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is kicked from level ground at 10 m/s and 40° above the horizontal towards a wall 8 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 10 m/sθ = 40°x = 8 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is thrown from ground level at 20 m/s and 60° above the horizontal. It lands on the flat roof of a building 9 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 20 m/sθ = 60°hroof = 9 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 0.5 kg block slides 13 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.1. Find the work Wf done against friction.
m = 0.5 kgθ = 35°μ = 0.1d = 13 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
A 5 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 40 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 8 m up the slope.
A 1000 kg car moving at 24 m/s runs into a stationary 2000 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 1000 kgv1 = 24 m/sm2 = 2000 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
A 5 g bullet is fired horizontally into a 4.5 kg block hanging from light strings 1.1 m long, and stays in it. The strings swing out to a largest angle of 30° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 4.5 kgL = 1.1 mθ = 30°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of glycerin, with its top edge 2.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 150 mm to 100 mm. In the wide section the pressure is 380 kPa and the velocity is 2.25 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A hose with an inner diameter of 40 mm siphons water from an open tank. The highest point C of the hose is 1 m above the water surface, and the outlet (open to the air) is 4.5 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the absolute pressure pC at point C. The atmospheric pressure is 101.3 kPa.
A heat engine receives heat from a source at 450 °C and rejects heat to the surroundings at 25 °C. Its actual thermal efficiency is 32%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.
TH = 450 °CTL = 25 °Cη = 32%
ηII = %
18.Heat engines & refrigeratorsHard
A heat pump delivers 17 kW of heat to a heating system at 45 °C, taking heat from a source at 0 °C. Its actual COP is 30% of the Carnot COP between these temperatures. Find the electrical power Ẇ it uses.
TH = 45 °CTL = 0 °CηII = 30%Q̇H = 17 kW
Ẇ = kW
19.Waves, sound & opticsMedium
A pipe closed at one end is 0.8 m long. The speed of sound is 343 m/s. Find the frequency f5 of its harmonic number 5.
v = 343 m/sn = 5L = 0.8 m
f5 = Hz
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.5 and a cladding with n₂ = 1.45. Find the largest angle θa to the fibre axis at which light from air can enter the end of the fibre and still be guided by total internal reflection.
n1 = 1.5n2 = 1.45n0 = 1.00
θa = °
3Solutions
1.Kinematics
Answer: d = 112.1 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Reaction distance
d1 = v₀·tr = 33.33·0.8 = 26.67 m
Braking distance
d2 = v₀²/(2a) = 33.33²/(2·6.5) = 85.47 m
Total
d = 26.67 + 85.47 = 112.1 m
Answer
d = 112.1 m
2.Kinematics
Answer: t = 3.159 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−30 = 6·t − ½·9.81·t²
4.905·t² − 6·t − 30 = 0
Solve the quadratic
Only the positive root is physical.
t = (6 + √(6² + 2·9.81·30))/9.81 = 3.159 s
Answer
t = 3.159 s
3.Newton’s laws
Answer: a = 5.554 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 10·cos 40° = 7.66 m/s
t = x/vx = 8/7.66 = 1.044 s
Height at that time
y = 6.428·1.044 − ½·9.81·1.044² = 1.363 m
Answer
y = 1.363 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: x = 28.98 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 10 m/s, vy = 17.32 m/s
Time to land on the roof
Larger root: the ball is descending.
9 = 17.32·t − 4.905·t²
t = (17.32 + √(17.32² − 2·9.81·9))/9.81 = 2.898 s
Horizontal distance
x = vx·t = 10·2.898 = 28.98 m
Answer
x = 28.98 m
7.Work & energy
Answer: Wf = 5.223 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 4.905·0.8192 = 4.018 N
F = μN = 0.1·4.018 = 0.4018 N
Work against friction
Wf = F·d = 0.4018·13 = 5.223 J
Answer
Wf = 5.223 J
8.Work & energy
Answer: v = 8.04 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 5·9.81 = 49.05 N
mg·sin θ = 12.7 N
μ·mg·cos θ = 7.107 N
Work–energy
½mv² = (40 − 19.8)·8 = 161.6 J
v = √(2·161.6/5) = 8.04 m/s
Answer
v = 8.04 m/s
9.Momentum & collisions
Answer: ΔK = 192000 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1000·24/3000 = 8 m/s
Kinetic energy before and after
Kbefore = ½·1000·24² = 288000 J
Kafter = ½·3000·8² = 96000 J
Energy lost
ΔK = 288000 − 96000 = 192000 J
Answer
ΔK = 192000 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: v = 1532 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.1·(1 − cos 30°) = 0.1474 m
Speed after impact
V = √(2·9.81·0.1474) = 1.7 m/s
Collision
v = (m + M)·V/m = 4.505·1.7/0.005 = 1532 m/s
Answer
v = 1532 m/s
11.Hydrostatic force
Answer: F = 264.9 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 3/2 = 3 m
A = H·b = 3·3 = 9 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3·9 = 264.9 kN
Answer
F = 264.9 kN
12.Hydrostatic force
Answer: ycp = 4.188 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 3/2 = 4 m
A = H·b = 3·2 = 6 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·4·6 = 296.7 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 2·3³/12 = 4.5 m⁴
ycp = yc + Ic/(yc·A) = 4 + 4.5/(4·6) = 4.188 m
Answer
ycp = 4.188 m
13.Continuity & Bernoulli
Answer: p2 = 369.7 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Velocity in the hose
Surface and outlet are both open to the air, so the pressure terms cancel.
If this pressure falls to the vapour pressure of the water, the siphon stops working.
15.Ideal gas law
Answer: P = 814.8 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 80/28.01 = 2.856 mol
T = 70 + 273.15 = 343.1 K
Pressure
P = nRT/V = 2.856·8.314·343.1/0.01 = 814.8 kPa
Answer
P = 814.8 kPa
16.Ideal gas law
Answer: ρ = 9.829 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 50 + 273.15 = 323.1 K
Density
ρ = 600·44.01/(8.314·323.1) = 9.829 kg/m³
Answer
ρ = 9.829 kg/m³
17.Heat engines & refrigerators
Answer: ηII = 54.45 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 450 + 273.15 = 723.1 K
TL = 25 + 273.15 = 298.1 K
Carnot efficiency
ηCarnot = 1 − 298.1/723.1 = 58.77 %
Second-law efficiency
ηII = η/ηCarnot = 32/58.77 = 54.45 %
Answer
ηII = 54.45 %
18.Heat engines & refrigerators
Answer: Ẇ = 8.015 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 45 + 273.15 = 318.1 K
TL = 0 + 273.15 = 273.1 K
Carnot and actual COP
COPmax = 318.1/(318.1 − 273.1) = 7.07
COP = 0.3·7.07 = 2.121
Power input
Ẇ = Q̇H/COP = 17/2.121 = 8.015 kW
Answer
Ẇ = 8.015 kW
19.Waves, sound & optics
Answer: f5 = 535.9 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 4L/n = 4·0.8/5 = 0.64 m
Frequency
f = v/λ = 343/0.64 = 535.9 Hz
Answer
f5 = 535.9 Hz
20.Waves, sound & optics
Answer: θa = 22.59 °
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.