Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A plane needs a speed of 250 km/h to take off and the usable runway is 900 m long. Starting from rest, what constant acceleration a does it need?
v₀ = 0v = 250 km/hs = 900 m
a = m/s²
2.KinematicsHard
A ball is thrown straight up at 7 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 7 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 2 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 2 kgθ = 20°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 3.5 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 4.5 kg mass. The hanging mass moves down. The ramp is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 3.5 kgm2 = 4.5 kgθ = 40°μ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 70° above horizontal from level ground. Ignore air resistance. Find the time of flight t until the ball hits the ground.
v0 = 36 m/sθ = 70°g = 9.81 m/s²
t = s
6.Projectile motionHard
A ball is launched at 20° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 34 m/sθ = 20°h = 60 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 1500 kg car drives up a 6° slope at a constant 90 km/h. Air resistance and rolling resistance together amount to 350 N. Find the power P the wheels must deliver, in kW.
A 5 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.2) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 5 kgh = 5 mL = 4.5 mμ = 0.2k = 800 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 1300 kg car moving at 25 m/s runs into a stationary 1300 kg car and the two lock together. What percentage ΔK/K of the original kinetic energy is lost?
m1 = 1300 kgv1 = 25 m/sm2 = 1300 kgv2 = 0
ΔK/K = %
10.Momentum & collisionsHard
A 5 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 0.7 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 5 gM = 1.5 kgL = 0.7 mθ = 25°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1 m wide sits in the wall of a tank of glycerin, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal pipe that narrows from 200 mm to 100 mm. In the wide section the pressure is 270 kPa and the velocity is 1.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 75 mm to 50 mm while rising 1 m. At section 1 the pressure is 200 kPa and the velocity is 1.5 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine receives heat from a source at 900 °C and rejects heat to the surroundings at 35 °C. Its actual thermal efficiency is 41%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.
TH = 900 °CTL = 35 °Cη = 41%
ηII = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 5 °C in a kitchen at 28 °C, removing heat from the cold space at 2 kW. Find the minimum power input Ẇmin.
TH = 28 °CTL = 5 °CQ̇L = 2 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
Light travels in flint glass (n = 1.62) towards a flat boundary with ethanol (n = 1.36). Find the critical angle θc beyond which it is totally reflected.
n1 = 1.62n2 = 1.36
θc = °
20.Waves, sound & opticsHard
A parking sensor at rest sends ultrasound of 40 kHz towards a car that approaches at 10 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).
f = 40 kHzu = 10 m/sv = 343 m/s
f″ = Hz
3Solutions
1.Kinematics
Answer: a = 2.679 m/s²
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v = 250/3.6 = 69.44 m/s
Acceleration
a = v²/(2s) = 69.44²/(2·900) = 2.679 m/s²
Answer
a = 2.679 m/s²
2.Kinematics
Answer: t = 3.478 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−35 = 7·t − ½·9.81·t²
4.905·t² − 7·t − 35 = 0
Solve the quadratic
Only the positive root is physical.
t = (7 + √(7² + 2·9.81·35))/9.81 = 3.478 s
Answer
t = 3.478 s
3.Newton’s laws
Answer: a = 2.433 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 44.15 N
m₁·g·sin θ = 22.07 N
μ·m₁·g·cos θ = 0 N
Acceleration of the system
a = (44.15 − 22.07 − 0)/8 = 2.759 m/s²
Answer
a = 2.759 m/s²
5.Projectile motion
Answer: t = 6.897 s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 36·cos 70° = 12.31 m/s
vy = v0·sin θ = 36·sin 70° = 33.83 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·33.83/9.81 = 6.897 s
Answer
t = 6.897 s
6.Projectile motion
Answer: x = 155.9 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 34·cos 20° = 31.95 m/s
vy = v0·sin θ = 34·sin 20° = 11.63 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 11.63·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (11.63 + √(135.2 + 1177))/9.81 = 4.878 s
Horizontal distance
x = vx·t = 31.95·4.878 = 155.9 m
Answer
x = 155.9 m
7.Work & energy
Answer: P = 47.2 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 6° = 1538 N
F = 1538 + 350 = 1888 N
Power
v = 90/3.6 = 25 m/s
P = F·v = 1888·25 = 47203 W = 47.2 kW
Answer
P = 47.2 kW
8.Work & energy
Answer: v = 8.969 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 49.05·(5 − 0.2·4.5) = 201.1 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·4.1) = 8.969 m/s
Answer
v = 8.969 m/s
9.Momentum & collisions
Answer: ΔK/K = 50 %
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1300·25/2600 = 12.5 m/s
Kinetic energy before and after
Kbefore = ½·1300·25² = 406250 J
Kafter = ½·2600·12.5² = 203125 J
Fraction lost
ΔK/K = 203125/406250 = 50 %
Answer
ΔK/K = 50 %
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: v = 341.4 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 0.7·(1 − cos 25°) = 0.06558 m
Speed after impact
V = √(2·9.81·0.06558) = 1.134 m/s
Collision
v = (m + M)·V/m = 1.505·1.134/0.005 = 341.4 m/s
Answer
v = 341.4 m/s
11.Hydrostatic force
Answer: F = 117.7 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 0.5 + 3/2 = 2 m
A = H·b = 3·2 = 6 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2·6 = 117.7 kN
Answer
F = 117.7 kN
12.Hydrostatic force
Answer: F = 37.08 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 0.5 + 2/2 = 1.5 m
A = H·b = 2·1 = 2 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·1.5·2 = 37.08 kN
Answer
F = 37.08 kN
13.Continuity & Bernoulli
Answer: p2 = 247 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 303.1 K, T2 = 513.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 5·(100/550)·(513.1/303.1) = 1.539 L
Answer
V2 = 1.539 L
17.Heat engines & refrigerators
Answer: ηII = 55.61 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 900 + 273.15 = 1173 K
TL = 35 + 273.15 = 308.1 K
Carnot efficiency
ηCarnot = 1 − 308.1/1173 = 73.73 %
Second-law efficiency
ηII = η/ηCarnot = 41/73.73 = 55.61 %
Answer
ηII = 55.61 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.1654 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 2/12.09 = 0.1654 kW
Answer
Ẇmin = 0.1654 kW
19.Waves, sound & optics
Answer: θc = 57.09 °
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Refraction at 90°
sin θc = n₂/n₁ = 1.36/1.62 = 0.8395
Critical angle
θc = arcsin(0.8395) = 57.09°
Answer
θc = 57.09°
20.Waves, sound & optics
Answer: f″ = 42402 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.