Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 20 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How long does it take the police car to catch up? Find t.
vcar = 20 m/sapolice = 3 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 13 m/s from the edge of a roof 5 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 13 m/sh₀ = 5 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A box slides across a level floor with an initial speed of 8 m/s and comes to rest after 8.2 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.
v₀ = 8 m/sd = 8.2 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
A 2 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 1.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 2 kgm2 = 1.5 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 30° above the horizontal and lands 100 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 30°R = 100 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is thrown from ground level at 38 m/s and 55° above the horizontal. It lands on the flat roof of a building 16 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 38 m/sθ = 55°hroof = 16 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A block slides from rest down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 3 m along the slope.
θ = 35°μ = 0.3d = 3 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 1 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.1) and then runs onto a spring (k = 500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 1 kgh = 5 mL = 4.5 mμ = 0.1k = 500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 1.5 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 4 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 1.5 kgm2 = 4 kgv1 = 4 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 1100 kg car runs into a parked 1600 kg car. The wrecks lock together and skid 17 m before stopping. The coefficient of kinetic friction between tyres and road is 0.5. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows at 17 L/s through a horizontal pipe that narrows from 200 mm to 100 mm. The pressure in the narrow section is 240 kPa. Ignoring losses, find the pressure p1 in the wide section.
Water flows up through a pipe that narrows from 100 mm to 75 mm while rising 7 m. At section 1 the pressure is 370 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 375 °C and a cold reservoir at 40 °C. It takes in 2500 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 375 °CTL = 40 °CQH = 2500 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 5 °C in a kitchen at 25 °C, removing heat from the cold space at 2.5 kW. Find the highest possible coefficient of performance COPmax.
TH = 25 °CTL = 5 °CQ̇L = 2.5 kW
COPmax =
19.Waves, sound & opticsMedium
A string fixed at both ends must have its harmonic number 2 at 240 Hz; waves travel on it at 240 m/s. Find its length L.
v = 240 m/sn = 2f2 = 240 Hz
L = m
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.52 and a cladding with n₂ = 1.42. Find its numerical aperture NA.
n1 = 1.52n2 = 1.42
NA =
3Solutions
1.Kinematics
Answer: t = 13.33 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·20/3 = 13.33 s
Answer
t = 13.33 s
At that moment the police car moves at 2v = 40 m/s.
2.Kinematics
Answer: t = 2.991 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−5 = 13·t − ½·9.81·t²
4.905·t² − 13·t − 5 = 0
Solve the quadratic
Only the positive root is physical.
t = (13 + √(13² + 2·9.81·5))/9.81 = 2.991 s
Answer
t = 2.991 s
3.Newton’s laws
Answer: μ = 0.3978
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Deceleration
a = v₀²/(2d) = 8²/(2·8.2) = 3.902 m/s²
Friction coefficient
μ·m·g = m·a → μ = a/g = 3.902/9.81 = 0.3978
Answer
μ = 0.3978
4.Newton’s laws
Answer: T = 10.09 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·100/sin 60°) = 33.66 m/s
Answer
v0 = 33.66 m/s
6.Projectile motion
Answer: x = 126 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 21.8 m/s, vy = 31.13 m/s
Time to land on the roof
Larger root: the ball is descending.
16 = 31.13·t − 4.905·t²
t = (31.13 + √(31.13² − 2·9.81·16))/9.81 = 5.782 s
Horizontal distance
x = vx·t = 21.8·5.782 = 126 m
Answer
x = 126 m
7.Work & energy
Answer: v = 4.393 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.5736 − 0.3·0.8192)) = 4.393 m/s
Answer
v = 4.393 m/s
8.Work & energy
Answer: x = 42.25 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 9.81·(5 − 0.1·4.5) = 44.64 J
Maximum compression
½kx² = 44.64 → x = √(2·44.64/500) = 0.4225 m = 42.25 cm
Answer
x = 42.25 cm
9.Momentum & collisions
Answer: v′1 = −1.818 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1.5 − 4)/(1.5 + 4)·4 = −1.818 m/s
v′2 = 2·1.5/(1.5 + 4)·4 = 2.182 m/s
Answer
v′1 = −1.818 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: v1 = 31.7 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 3/2 = 2.5 m
A = H·b = 3·1.5 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.5·4.5 = 110.4 kN
Answer
F = 110.4 kN
12.Hydrostatic force
Answer: F = 14.71 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 0.5 + 1/2 = 1 m
A = H·b = 1·1.5 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·1·1.5 = 14.71 kN
Answer
F = 14.71 kN
13.Continuity & Bernoulli
Answer: p1 = 242.2 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 375 + 273.15 = 648.1 K
TL = 40 + 273.15 = 313.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 313.1/648.1 = 51.69 %
Maximum work
Wmax = ηmax·QH = 0.5169·2500 = 1292 kJ
Answer
Wmax = 1292 kJ
18.Heat engines & refrigerators
Answer: COPmax = 13.91
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength
λ = v/f = 240/240 = 1 m
Length
L = nλ/2 = 2·1/2 = 1 m
Answer
L = 1 m
20.Waves, sound & optics
Answer: NA = 0.5422
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.