Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)2.083 s16.67

A car driving at 60 km/h brakes with a constant deceleration of 8 m/s² until it stops. Find the braking distance s.

v₀ = 60 km/ha = −8 m/s²v = 0
s = m
2.KinematicsHard
a = 40 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 40 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.

a = 40 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
25 kg35°F = 110 Nμ = 0.4

A 25 kg sled is pulled across level snow by a rope at 35° above the horizontal with a force of 110 N. The coefficient of kinetic friction is 0.4. Use g = 9.81 m/s². Find the acceleration a of the sled.

m = 25 kgF = 110 Nθ = 35°μ = 0.4g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
10 kg4 kgTF = 25 Nμ = 0.15

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 25 N pulls the front 4 kg block; the 10 kg block is towed behind. The coefficient of kinetic friction is 0.15 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.

m1 = 10 kgm2 = 4 kgF = 25 Nμ = 0.15g = 9.81 m/s²
T = N
5.Projectile motionMedium
v0​ = ?55°R = 50 m

A ball is launched from level ground at 55° above the horizontal and lands 50 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 55°R = 50 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 25 mv0​ = 21 m/s50°α = ?

A ball is launched at 21 m/s and 50° above the horizontal from the top of a 25 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 21 m/sθ = 50°h = 25 mg = 9.81 m/s²
α = °
7.Work & energyMedium
50 km/h

A car travelling at 50 km/h on a level road brakes hard and skids to a stop with its wheels locked. The coefficient of kinetic friction between the tyres and the road is 0.8. Find the stopping distance d.

v = 50 km/hμ = 0.8g = 9.81 m/s²
d = m
8.Work & energyHard
h = 10.4 mR = 4 mN = ?

A 10 kg cart is released from rest at a height of 10.4 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.

m = 10 kgh = 10.4 mR = 4 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
2 kgv = ?15 gh = 25 cm

A 15 g bullet is fired horizontally into a 2 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 25 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 15 gM = 2 kgh = 25 cmg = 9.81 m/s²
v = m/s
10.Momentum & collisionsHard
1900 kg23 m/s1000 kg23 m/sθ = ?

At a crossing a 1900 kg car travelling east at 23 m/s collides with a 1000 kg car travelling north at 23 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.

m1 = 1900 kgv1 = 23 m/s (E)m2 = 1000 kgv2 = 23 m/s (N)
θ = °
11.Hydrostatic forceMedium
gated = 2 mH = 3 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 2 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 2 mH = 3 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 2.5 mH = 3 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 2.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.

d = 2.5 mH = 3 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
d1​ = 200 mmd2​ = 100 mm12p1​ − p2​ = 59 kPaQ = ?

Water flows through a horizontal venturi meter with an inlet diameter of 200 mm and a throat diameter of 100 mm. The pressure at the inlet is 59 kPa higher than at the throat. Ignoring losses, find the flow rate Q.

d1 = 200 mmd2 = 100 mmp1 − p2 = 59 kPaρ = 1000 kg/m³
Q = L/s
14.Continuity & BernoulliHard
d1​ = 80 mmd2​ = 40 mm12Δh = 250 mmmercuryQ = ?

A horizontal venturi meter (inlet 80 mm, throat 40 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 250 mm. The discharge coefficient is 0.97. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².

d1 = 80 mmd2 = 40 mmΔh = 250 mmCd = 0.97ρHg = 13 600 kg/m³g = 9.81 m/s²
Q = L/s
15.Ideal gas lawMedium
330 g of CO₂V = 10 LT = 70 °CP = ?

A tank of 10 L contains 330 g of CO₂ at 70 °C. Treat it as an ideal gas and find the pressure P.

m = 330 gM = 44.01 g/molV = 10 LT = 70 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of Ar goes from 200 kPa, 20 L, 15 °C to 650 kPa and 150 °C. Find the new volume V2.

P1 = 200 kPaV1 = 20 LT1 = 15 °CP2 = 650 kPaT2 = 150 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 350 °CTL​ = ?EQH​ = 3600 kJQL​ = 1751 kJW

A reversible (Carnot) heat engine takes in 3600 kJ of heat from a reservoir at 350 °C and rejects 1751 kJ per cycle. Find the temperature TL of the cold reservoir in °C.

TH = 350 °CQH = 3600 kJQL = 1751 kJ
TL = °C
18.Heat engines & refrigeratorsHard
TH​ = 32 °CTL​ = -20 °CRQ̇H​Q̇L​ = 4.5 kWẆ

A refrigerator keeps its cold space at -20 °C in a kitchen at 32 °C, removing heat from the cold space at 4.5 kW. Find the highest possible coefficient of performance COPmax.

TH = 32 °CTL = -20 °CQ̇L = 4.5 kW
COPmax =
19.Waves, sound & opticsMedium
80 dB?10 m30 m

A small source sends sound equally in all directions. The level is 80 dB at 10 m from it. Find the level β2 at 30 m, ignoring absorption and reflections.

β1 = 80 dBr1 = 10 mr2 = 30 m
β2 = dB
20.Waves, sound & opticsHard
SO20 m/sf = 30 kHz

A sensor at rest sends ultrasound of 30 kHz towards a car that moves away at 20 m/s and mixes the echo with the emitted signal. Find the beat frequency fb (speed of sound 343 m/s).

f = 30 kHzu = 20 m/sv = 343 m/s
fb = Hz

3Solutions

1.Kinematics

Answer: s = 17.36 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 60/3.6 = 16.67 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 16.67²/(2·8) = 17.36 m

Answer

s = 17.36 m
2.Kinematics

Answer: hmax = 101.5 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 40·1 = 40 m/s
h₁ = ½·40·1² = 20 m

Free flight up

At the top the velocity is zero.

Δh = v₁²/(2g) = 40²/(2·9.81) = 81.55 m
hmax = 20 + 81.55 = 101.5 m

Answer

hmax = 101.5 m
3.Newton’s laws

Answer: a = 0.6898 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Normal force

N = m·g − F·sin θ = 245.3 − 110·sin 35° = 182.2 N

Horizontal forces

m·a = F·cos θ − μ·N = 90.11 − 72.86
a = 17.24/25 = 0.6898 m/s²

Answer

a = 0.6898 m/s²
4.Newton’s laws

Answer: T = 17.86 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (25 − 20.6)/14 = 0.3142 m/s²

Rear block alone

T = m1·(a + μ·g) = 10·(0.3142 + 1.472) = 17.86 N

Answer

T = 17.86 N

With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).

5.Projectile motion

Answer: v0 = 22.85 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·50/sin 110°) = 22.85 m/s

Answer

v0 = 22.85 m/s
6.Projectile motion

Answer: α = 63.75 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 21·cos 50° = 13.5 m/s
vy0 = 21·sin 50° = 16.09 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(16.09² + 2·9.81·25) = 27.37 m/s

Impact angle

tan α = vy/vx = 27.37/13.5 → α = 63.75°

Answer

α = 63.75°
7.Work & energy

Answer: d = 12.29 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Speed in base units

v = 50/3.6 = 13.89 m/s

Energy balance

½mv² = μmg·d → d = v²/(2μg) = 13.89²/(2·0.8·9.81) = 12.29 m

Answer

d = 12.29 m

Doubling the speed makes the stopping distance four times longer.

8.Work & energy

Answer: N = 19.62 N

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(10.4 − 8) = 47.09 m²/s²

Forces at the top

m·g = 10·9.81 = 98.1 N
N = mv²/R − mg = 10·47.09/4 − 98.1 = 19.62 N

Answer

N = 19.62 N

The cart just makes it round when h = 2.5R; then N = 0 at the top.

9.Momentum & collisions

Answer: v = 297.5 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.25) = 2.215 m/s

Collision

m·v = (m + M)·V → v = (0.015 + 2)·2.215/0.015 = 297.5 m/s

Answer

v = 297.5 m/s
10.Momentum & collisions

Answer: θ = 27.76 °

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum components

px = 1900·23 = 43700 kg·m/s
py = 1000·23 = 23000 kg·m/s

Direction

tan θ = py/px = 0.5263 → θ = 27.76°

Answer

θ = 27.76°
11.Hydrostatic force

Answer: F = 103 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 2 + 3/2 = 3.5 m
A = H·b = 3·1 = 3 m²
gated = 2 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·3.5·3 = 103 kN

Answer

F = 103 kN
12.Hydrostatic force

Answer: ycp = 4.188 m

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 2.5 + 3/2 = 4 m
A = H·b = 3·2 = 6 m²
gated = 2.5 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·4·6 = 207.2 kN

Centre of pressure

Pressure grows with depth, so the resultant acts below the centroid.

Ic = b·H³/12 = 2·3³/12 = 4.5 m⁴
ycp = yc + Ic/(yc·A) = 4 + 4.5/(4·6) = 4.188 m

Answer

ycp = 4.188 m
13.Continuity & Bernoulli

Answer: Q = 88.11 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity

v1 = v2·(100/200)² = 0.25·v2

Bernoulli between inlet and throat

The pipe is horizontal, so only pressure and velocity change.

p1 − p2 = ½ρv2²(1 − β⁴)
v2 = √(2·59000/(1000·(1 − 0.0625))) = 11.22 m/s
v1 = 2.805 m/s

Flow rate

Q = A2·v2 = 0.007854·11.22 = 0.08811 m³/s = 88.11 L/s

Answer

Q = 88.11 L/s
14.Continuity & Bernoulli

Answer: Q = 9.897 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Pressure difference from the manometer

Δp = (13600 − 1000)·9.81·0.25 = 30902 Pa

Throat velocity

Continuity and Bernoulli together give the ideal throat velocity.

β = 40/80 = 0.5
v2 = √(2·30902/(1000·(1 − 0.0625))) = 8.119 m/s

Actual flow rate

Q = Cd·A2·v2 = 0.97·0.001257·8.119 = 0.009897 m³/s = 9.897 L/s

Answer

Q = 9.897 L/s
15.Ideal gas law

Answer: P = 2139 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 330/44.01 = 7.498 mol
T = 70 + 273.15 = 343.1 K

Pressure

P = nRT/V = 7.498·8.314·343.1/0.01 = 2139 kPa

Answer

P = 2139 kPa
16.Ideal gas law

Answer: V2 = 9.037 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 288.1 K, T2 = 423.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 20·(200/650)·(423.1/288.1) = 9.037 L

Answer

V2 = 9.037 L
17.Heat engines & refrigerators

Answer: TL = 29.94 °C

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperature of the source

TH = 350 + 273.15 = 623.1 K

Reversible heat ratio

TL = TH·QL/QH = 623.1·1751/3600 = 303.1 K = 29.94 °C

Answer

TL = 29.94 °C
18.Heat engines & refrigerators

Answer: COPmax = 4.868

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 32 + 273.15 = 305.1 K
TL = -20 + 273.15 = 253.1 K

Best possible COP

COPR,max = TL/(TH − TL) = 253.1/(305.1 − 253.1) = 4.868

Answer

COPmax = 4.868
19.Waves, sound & optics

Answer: β2 = 70.46 dB

Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).

Intensity ratio

I₂/I₁ = (10/30)² = 0.1111

New level

β₂ = 80 + 10·log₁₀(0.1111) = 70.46 dB

Answer

β2 = 70.46 dB

Every doubling of the distance lowers the level by about 6 dB.

20.Waves, sound & optics

Answer: fb = 3306 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 30000·(343 − 20)/343 = 28251 Hz

Frequency of the echo

f″ = f′·343/(343 + 20) = 26694 Hz

Beat frequency

fb = |f″ − f| = 3306 Hz

Answer

fb = 3306 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers