Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 16 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2.5 m/s². How long does it take the police car to catch up? Find t.
vcar = 16 m/sapolice = 2.5 m/s²v0,police = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 15 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 15 m/sh₀ = 35 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 7 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 7 kgθ = 45°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 80 N pulls the front 2 kg block; the 5 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 5 kgm2 = 2 kgF = 80 Nμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 38 m/s and must land 130 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 38 m/sR = 130 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 22 m/sθ = 55°h = 25 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 18 m along the slope.
θ = 30°μ = 0.3d = 18 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 2 kg block starts from rest at the bottom of a 20° slope and is pulled up the slope by a constant force of 15 N parallel to the slope. The coefficient of kinetic friction is 0.1. Find the speed v of the block after it has moved 5 m up the slope.
A 4 kg glider moving at 3 m/s makes a perfectly elastic head-on collision with a 0.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4 kgm2 = 0.5 kgv1 = 3 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
At a crossing a 900 kg car travelling east at 23 m/s collides with a 1100 kg car travelling north at 21 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 900 kgv1 = 23 m/s (E)m2 = 1100 kgv2 = 21 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal venturi meter with an inlet diameter of 150 mm and a throat diameter of 100 mm. The pressure at the inlet is 58 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
Water flows up through a pipe that narrows from 100 mm to 50 mm while rising 8 m. At section 1 the pressure is 400 kPa and the velocity is 2.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A reversible (Carnot) heat engine takes in 1500 kJ of heat from a reservoir at 550 °C and rejects 598 kJ per cycle. Find the temperature TL of the cold reservoir in °C.
TH = 550 °CQH = 1500 kJQL = 598 kJ
TL = °C
18.Heat engines & refrigeratorsHard
A Carnot heat engine receives 170 kW of heat from a source at 1000 °C and rejects heat to the surroundings at 20 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at -30 °C and also rejects heat to the surroundings at 20 °C. Find the rate Q̇L at which heat is removed from the freezer.
TH = 1000 °CT0 = 20 °CTL = -30 °CQ̇H = 170 kW
Q̇L = kW
19.Waves, sound & opticsMedium
A string fixed at both ends is 0.75 m long; waves travel on it at 180 m/s. Find the frequency f5 of its harmonic number 5.
v = 180 m/sn = 5L = 0.75 m
f5 = Hz
20.Waves, sound & opticsHard
Light of wavelength 500 nm falls at right angles on a grating with 800 lines per millimetre. Find the angle θ2 of the order-2 maximum.
N = 800 mm⁻¹λ = 500 nmm = 2
θ2 = °
3Solutions
1.Kinematics
Answer: t = 12.8 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·16/2.5 = 12.8 s
Answer
t = 12.8 s
At that moment the police car moves at 2v = 32 m/s.
2.Kinematics
Answer: hmax = 46.47 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 15²/(2·9.81) = 11.47 m
Height above the ground
hmax = 35 + 11.47 = 46.47 m
Answer
hmax = 46.47 m
3.Newton’s laws
Answer: a = 5.549 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·130/38² = 0.8832
Angle
2θ = 62.03° → θ = 31.01°
Answer
θ = 31.01°
The other solution is 90° − θ = 58.99°.
6.Projectile motion
Answer: x = 59.91 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 22·cos 55° = 12.62 m/s
vy = v0·sin θ = 22·sin 55° = 18.02 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 25 + 18.02·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.02 + √(324.8 + 490.5))/9.81 = 4.748 s
Horizontal distance
x = vx·t = 12.62·4.748 = 59.91 m
Answer
x = 59.91 m
7.Work & energy
Answer: v = 9.21 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·18·(0.5 − 0.3·0.866)) = 9.21 m/s
Answer
v = 9.21 m/s
8.Work & energy
Answer: v = 5.677 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 2·9.81 = 19.62 N
mg·sin θ = 6.71 N
μ·mg·cos θ = 1.844 N
Work–energy
½mv² = (15 − 8.554)·5 = 32.23 J
v = √(2·32.23/2) = 5.677 m/s
Answer
v = 5.677 m/s
9.Momentum & collisions
Answer: v′1 = 2.333 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4 − 0.5)/(4 + 0.5)·3 = 2.333 m/s
v′2 = 2·4/(4 + 0.5)·3 = 5.333 m/s
Answer
v′1 = 2.333 m/s
10.Momentum & collisions
Answer: v′ = 15.51 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 3/2 = 4.5 m
A = H·b = 3·1.5 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.5·4.5 = 198.7 kN
Answer
F = 198.7 kN
12.Hydrostatic force
Answer: F = 49.66 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 1.5/2 = 2.25 m
A = H·b = 1.5·1.5 = 2.25 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.25·2.25 = 49.66 kN
Answer
F = 49.66 kN
13.Continuity & Bernoulli
Answer: Q = 94.43 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(100/150)² = 0.4444·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperature of the source
TH = 550 + 273.15 = 823.1 K
Reversible heat ratio
TL = TH·QL/QH = 823.1·598/1500 = 328.2 K = 55.01 °C
Answer
TL = 55.01 °C
18.Heat engines & refrigerators
Answer: Q̇L = 636.4 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 1000 + 273.15 = 1273 K
T0 = 20 + 273.15 = 293.1 K
TL = -30 + 273.15 = 243.1 K
Engine work
η = 1 − 293.1/1273 = 0.7697
Ẇ = 0.7697·170 = 130.9 kW
Heat removed by the refrigerator
COPR = 243.1/(293.1 − 243.1) = 4.863
Q̇L = 4.863·130.9 = 636.4 kW
Answer
Q̇L = 636.4 kW
19.Waves, sound & optics
Answer: f5 = 600 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Wavelength of this mode
λ = 2L/n = 2·0.75/5 = 0.3 m
Frequency
f = v/λ = 180/0.3 = 600 Hz
Answer
f5 = 600 Hz
20.Waves, sound & optics
Answer: θ2 = 53.13 °
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …