Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)0.5 s27.78

A driver moving at 100 km/h sees an obstacle. Her reaction time is 0.5 s, after which the car brakes with a constant deceleration of 4 m/s². Find the total stopping distance d from the moment she sees the obstacle.

v₀ = 100 km/htr = 0.5 sa = −4 m/s²
d = m
2.KinematicsHard
v₀ = 9 m/s35 m

A ball is thrown straight up at 9 m/s from the edge of a roof 35 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 9 m/sh₀ = 35 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
boxv₀ = 11 m/sμ = ?

A box slides across a level floor with an initial speed of 11 m/s and comes to rest after 25 m. Use g = 9.81 m/s². Find the coefficient of kinetic friction μ.

v₀ = 11 m/sd = 25 mg = 9.81 m/s²
μ =
4.Newton’s lawsHard
m1​ = 9 kg2.5 kgμ = 0.1

A 9 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 2.5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 9 kgm2 = 2.5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
27 my = ?v0​ = 26 m/s40°

A ball is kicked from level ground at 26 m/s and 40° above the horizontal towards a wall 27 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 26 m/sθ = 40°x = 27 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 30 mv0​ = 33 m/s55°range

A ball is launched at 55° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the time of flight t until the ball hits the ground.

v0 = 33 m/sθ = 55°h = 30 mg = 9.81 m/s²
t = s
7.Work & energyMedium
25°d = 15 mμ = 0.2

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.2. Find its speed v after it has slid 15 m along the slope.

θ = 25°μ = 0.2d = 15 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
h = 1.5 mL = 2.5 mμ = 0.25k = 800 N/m

A 4 kg block is released from rest at height 1.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.25) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 1.5 mL = 2.5 mμ = 0.25k = 800 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
11 kg78 m/s1 kgv′2​ = ?

A 12 kg projectile moving horizontally at 19 m/s explodes into two fragments that move along the same line. The 11 kg fragment continues forwards at 78 m/s. Find the velocity v′2 of the 1 kg fragment (positive in the original direction).

M = 12 kgu = 19 m/sm1 = 11 kgv′1 = 78 m/sm2 = 1 kg
v′2 = m/s
10.Momentum & collisionsHard
18 m/s9 m/s

A 0.6 kg ball hits a wall at 18 m/s and bounces straight back at 9 m/s. The contact lasts 50 ms. Find the average force Favg of the wall on the ball.

m = 0.6 kgvin = 18 m/svout = 9 m/sΔt = 50 ms
Favg = N
11.Hydrostatic forceMedium
gated = 1 mH = 3 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 3 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 0.5 mH = 1.5 m

A vertical rectangular gate 1.5 m wide sits in the wall of a tank of seawater, with its top edge 0.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.

d = 0.5 mH = 1.5 mb = 1.5 mρ = 1025 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
12d1​ = 75 mm, p1​ = 300 kPad2​ = 40 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 75 mm to 40 mm. In the wide section the pressure is 300 kPa and the velocity is 3 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 75 mmd2 = 40 mmp1 = 300 kPav1 = 3 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
12d1​ = 100 mm, p1​ = 370 kPad2​ = 75 mm, p2​ = ?Δz = 9 m

Water flows up through a pipe that narrows from 100 mm to 75 mm while rising 9 m. At section 1 the pressure is 370 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 100 mmd2 = 75 mmp1 = 370 kPav1 = 0.5 m/sΔz = 9 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
230 g of CO₂P = 200 kPaT = 70 °CV = ?

What volume V does 230 g of CO₂ occupy at 200 kPa and 70 °C? Treat it as an ideal gas.

m = 230 gM = 44.01 g/molP = 200 kPaT = 70 °CR = 8.314 J/(mol·K)
V = L
16.Ideal gas lawHard
State 1State 2

A fixed amount of N₂ goes from 150 kPa, 20 L, 15 °C to 350 kPa and 130 °C. Find the new volume V2.

P1 = 150 kPaV1 = 20 LT1 = 15 °CP2 = 350 kPaT2 = 130 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 425 °CTL​ = ?EQH​ = 1400 kJQL​ = 618 kJW

A reversible (Carnot) heat engine takes in 1400 kJ of heat from a reservoir at 425 °C and rejects 618 kJ per cycle. Find the temperature TL of the cold reservoir in °C.

TH = 425 °CQH = 1400 kJQL = 618 kJ
TL = °C
18.Heat engines & refrigeratorsHard
TH​ = 350 °CTL​ = 10 °CEQH​ = 1000 kJQL​ = 670 kJW = 330 kJ

A heat engine takes in 1000 kJ of heat from a reservoir at 350 °C, produces 330 kJ of work and rejects the rest to a reservoir at 10 °C, per cycle. Find the total entropy generated Sgen per cycle.

TH = 350 °CTL = 10 °CQH = 1000 kJW = 330 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
L = 0.8 mn = 2

A pipe open at both ends is 0.8 m long. The speed of sound is 343 m/s. Find the frequency f2 of its harmonic number 2.

v = 343 m/sn = 2L = 0.8 m
f2 = Hz
20.Waves, sound & opticsHard
SO10 m/sf = 30 kHz

A parking sensor at rest sends ultrasound of 30 kHz towards a car that moves away at 10 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).

f = 30 kHzu = 10 m/sv = 343 m/s
f″ = Hz

3Solutions

1.Kinematics

Answer: d = 110.3 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 100/3.6 = 27.78 m/s

Reaction distance

d1 = v₀·tr = 27.78·0.5 = 13.89 m

Braking distance

d2 = v₀²/(2a) = 27.78²/(2·4) = 96.45 m

Total

d = 13.89 + 96.45 = 110.3 m

Answer

d = 110.3 m
2.Kinematics

Answer: t = 3.742 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−35 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 35 = 0

Solve the quadratic

Only the positive root is physical.

t = (9 + √(9² + 2·9.81·35))/9.81 = 3.742 s

Answer

t = 3.742 s
3.Newton’s laws

Answer: μ = 0.2467

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

a = v₀²/(2d) = 11²/(2·25) = 2.42 m/s²

Friction coefficient

μ·m·g = m·a → μ = a/g = 2.42/9.81 = 0.2467

Answer

μ = 0.2467
4.Newton’s laws

Answer: T = 21.11 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (24.53 − 8.829)/11.5 = 1.365 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 9·1.365 + 8.829 = 21.11 N

Answer

T = 21.11 N
5.Projectile motion

Answer: y = 13.64 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 26·cos 40° = 19.92 m/s
t = x/vx = 27/19.92 = 1.356 s

Height at that time

y = 16.71·1.356 − ½·9.81·1.356² = 13.64 m

Answer

y = 13.64 m

The ball is still rising at the wall.

6.Projectile motion

Answer: t = 6.458 s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 33·cos 55° = 18.93 m/s
vy = v0·sin θ = 33·sin 55° = 27.03 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 30 + 27.03·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (27.03 + √(730.7 + 588.6))/9.81 = 6.458 s

Answer

t = 6.458 s
7.Work & energy

Answer: v = 8.428 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·15·(0.4226 − 0.2·0.9063)) = 8.428 m/s

Answer

v = 8.428 m/s
8.Work & energy

Answer: x = 29.3 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(1.5 − 0.25·2.5) = 34.34 J

Maximum compression

½kx² = 34.34 → x = √(2·34.34/800) = 0.293 m = 29.3 cm

Answer

x = 29.3 cm
9.Momentum & collisions

Answer: v′2 = −630 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 12·19 = 228 kg·m/s

Momentum after

228 = 11·78 + 1·v′2
v′2 = (228 − 858)/1 = −630 m/s

Answer

v′2 = −630 m/s

The minus sign means the second fragment flies backwards.

10.Momentum & collisions

Answer: Favg = 324 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.6·(9 + 18) = 16.2 N·s

Average force

Favg = J/Δt = 16.2/0.05 = 324 N

Answer

Favg = 324 N
11.Hydrostatic force

Answer: F = 220.7 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 3/2 = 2.5 m
A = H·b = 3·3 = 9 m²
gated = 1 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2.5·9 = 220.7 kN

Answer

F = 220.7 kN
12.Hydrostatic force

Answer: ycp = 1.4 m

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 0.5 + 1.5/2 = 1.25 m
A = H·b = 1.5·1.5 = 2.25 m²
gated = 0.5 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 1025·9.81·1.25·2.25 = 28.28 kN

Centre of pressure

Pressure grows with depth, so the resultant acts below the centroid.

Ic = b·H³/12 = 1.5·1.5³/12 = 0.4219 m⁴
ycp = yc + Ic/(yc·A) = 1.25 + 0.4219/(1.25·2.25) = 1.4 m

Answer

ycp = 1.4 m
13.Continuity & Bernoulli

Answer: p2 = 248.9 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 3·(75/40)² = 10.55 m/s
½ρ(v1² − v2²) = ½·1000·(3² − 10.55²)/1000 = −51.12 kPa
p2 = p1 + ½ρ(v1² − v2²) = 300 + (−51.12) = 248.9 kPa

Answer

p2 = 248.9 kPa
14.Continuity & Bernoulli

Answer: p2 = 281.4 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.5·(100/75)² = 0.8889 m/s
½ρ(v1² − v2²) = ½·1000·(0.5² − 0.8889²)/1000 = −0.2701 kPa
ρgΔz = 1000·9.81·9/1000 = 88.29 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 370 + (−0.2701) − 88.29 = 281.4 kPa

Answer

p2 = 281.4 kPa
15.Ideal gas law

Answer: V = 74.55 L

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = 230/44.01 = 5.226 mol
T = 70 + 273.15 = 343.1 K

Volume

V = nRT/P = 5.226·8.314·343.1/200 = 74.55 L

Answer

V = 74.55 L
16.Ideal gas law

Answer: V2 = 11.99 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 288.1 K, T2 = 403.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 20·(150/350)·(403.1/288.1) = 11.99 L

Answer

V2 = 11.99 L
17.Heat engines & refrigerators

Answer: TL = 35.03 °C

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperature of the source

TH = 425 + 273.15 = 698.1 K

Reversible heat ratio

TL = TH·QL/QH = 698.1·618/1400 = 308.2 K = 35.03 °C

Answer

TL = 35.03 °C
18.Heat engines & refrigerators

Answer: Sgen = 0.7615 kJ/K

Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.

Heat rejected

QL = QH − W = 1000 − 330 = 670 kJ

Absolute temperatures

TH = 350 + 273.15 = 623.1 K
TL = 10 + 273.15 = 283.1 K

Entropy changes of the reservoirs

ΔSH = −1000/623.1 = −1.605 kJ/K
ΔSL = 670/283.1 = 2.366 kJ/K
Sgen = 2.366 − 1.605 = 0.7615 kJ/K

Answer

Sgen = 0.7615 kJ/K

Sgen > 0, so the engine is possible but irreversible.

19.Waves, sound & optics

Answer: f2 = 428.8 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Wavelength of this mode

λ = 2L/n = 2·0.8/2 = 0.8 m

Frequency

f = v/λ = 343/0.8 = 428.8 Hz

Answer

f2 = 428.8 Hz
20.Waves, sound & optics

Answer: f″ = 28300 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 30000·(343 − 10)/343 = 29125 Hz

Frequency of the echo

f″ = f′·343/(343 + 10) = 28300 Hz

Answer

f″ = 28300 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers