Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 36 km/h sees an obstacle. Her reaction time is 0.6 s, after which the car brakes with a constant deceleration of 7 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 36 km/htr = 0.6 sa = −7 m/s²
d = m
2.KinematicsHard
A ball is thrown straight up at 5 m/s from the edge of a roof 20 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.
v₀ = 5 m/sh₀ = 20 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 15 kg box is pushed up a ramp at 15° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the pushing force F.
m = 15 kgθ = 15°μ = 0.1g = 9.81 m/s²
F = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 45 N pulls the front 7 kg block; the 6 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 6 kgm2 = 7 kgF = 45 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 55° above the horizontal and lands 80 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 55°R = 80 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is launched at 20° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 24 m/sθ = 20°h = 30 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 1500 kg car drives up a 4° slope at a constant 54 km/h. Air resistance and rolling resistance together amount to 350 N. Find the power P the wheels must deliver, in kW.
A 0.5 kg block is released from rest at height 4.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 2.5 m long (μ = 0.25) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 0.5 kgh = 4.5 mL = 2.5 mμ = 0.25k = 2000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 0.5 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 4.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 0.5 kgm2 = 4.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 15 g bullet is fired horizontally into a 2 kg block hanging from light strings 1 m long, and stays in it. The strings swing out to a largest angle of 15° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 15 gM = 2 kgL = 1 mθ = 15°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 3 mH = 2 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
A vertical rectangular gate 3 m wide sits in the wall of a tank of oil, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 1 mH = 1 mb = 3 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
Water flows through a horizontal venturi meter with an inlet diameter of 250 mm and a throat diameter of 125 mm. The pressure at the inlet is 44 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
Water flows up through a pipe that narrows from 150 mm to 75 mm while rising 9 m. At section 1 the pressure is 160 kPa and the velocity is 1.5 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 275 °C and a cold reservoir at 15 °C. It takes in 2500 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 275 °CTL = 15 °CQH = 2500 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at -20 °C in a kitchen at 32 °C, removing heat from the cold space at 4 kW. Find the minimum power input Ẇmin.
TH = 32 °CTL = -20 °CQ̇L = 4 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An object 1.5 cm tall stands 20 cm in front of a thin diverging lens with a focal length of 30 cm. Find the image height hi (negative for an inverted image).
ho = 1.5 cmdo = 20 cmf = −30 cm
hi = cm
20.Waves, sound & opticsHard
Light of wavelength 589 nm falls on two slits 0.15 mm apart. The screen is 2.5 m away. Find the distance y5 from the central bright fringe to bright fringe number 5.
λ = 589 nmd = 0.15 mmL = 2.5 mm = 5
y5 = mm
3Solutions
1.Kinematics
Answer: d = 13.14 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 36/3.6 = 10 m/s
Reaction distance
d1 = v₀·tr = 10·0.6 = 6 m
Braking distance
d2 = v₀²/(2a) = 10²/(2·7) = 7.143 m
Total
d = 6 + 7.143 = 13.14 m
Answer
d = 13.14 m
2.Kinematics
Answer: hmax = 21.27 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Rise above the roof
0 = v₀² − 2·g·Δh → Δh = 5²/(2·9.81) = 1.274 m
Height above the ground
hmax = 20 + 1.274 = 21.27 m
Answer
hmax = 21.27 m
3.Newton’s laws
Answer: F = 52.3 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 38.09 + 14.21 = 52.3 N
Answer
F = 52.3 N
4.Newton’s laws
Answer: T = 20.77 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: v0 = 28.9 m/s
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·80/sin 110°) = 28.9 m/s
Answer
v0 = 28.9 m/s
6.Projectile motion
Answer: x = 77.75 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 24·cos 20° = 22.55 m/s
vy = v0·sin θ = 24·sin 20° = 8.208 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 30 + 8.208·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (8.208 + √(67.38 + 588.6))/9.81 = 3.448 s
Horizontal distance
x = vx·t = 22.55·3.448 = 77.75 m
Answer
x = 77.75 m
7.Work & energy
Answer: P = 20.65 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1500·9.81 = 14715 N
mg·sin θ = 14715·sin 4° = 1026 N
F = 1026 + 350 = 1376 N
Power
v = 54/3.6 = 15 m/s
P = F·v = 1376·15 = 20647 W = 20.65 kW
Answer
P = 20.65 kW
8.Work & energy
Answer: x = 13.79 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 4.905·(4.5 − 0.25·2.5) = 19.01 J
Maximum compression
½kx² = 19.01 → x = √(2·19.01/2000) = 0.1379 m = 13.79 cm
Answer
x = 13.79 cm
9.Momentum & collisions
Answer: v′1 = −8.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 4.5)/(0.5 + 4.5)·11 = −8.8 m/s
v′2 = 2·0.5/(0.5 + 4.5)·11 = 2.2 m/s
Answer
v′1 = −8.8 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: v = 109.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1·(1 − cos 15°) = 0.03407 m
Speed after impact
V = √(2·9.81·0.03407) = 0.8176 m/s
Collision
v = (m + M)·V/m = 2.015·0.8176/0.015 = 109.8 m/s
Answer
v = 109.8 m/s
11.Hydrostatic force
Answer: F = 78.48 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 2/2 = 4 m
A = H·b = 2·1 = 2 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4·2 = 78.48 kN
Answer
F = 78.48 kN
12.Hydrostatic force
Answer: F = 38.85 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 1/2 = 1.5 m
A = H·b = 1·3 = 3 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·1.5·3 = 38.85 kN
Answer
F = 38.85 kN
13.Continuity & Bernoulli
Answer: Q = 118.9 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(125/250)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 303.1 K, T2 = 403.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 10·(250/250)·(403.1/303.1) = 13.3 L
Answer
V2 = 13.3 L
17.Heat engines & refrigerators
Answer: Wmax = 1186 kJ
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 275 + 273.15 = 548.1 K
TL = 15 + 273.15 = 288.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 288.1/548.1 = 47.43 %
Maximum work
Wmax = ηmax·QH = 0.4743·2500 = 1186 kJ
Answer
Wmax = 1186 kJ
18.Heat engines & refrigerators
Answer: Ẇmin = 0.8216 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 4/4.868 = 0.8216 kW
Answer
Ẇmin = 0.8216 kW
19.Waves, sound & optics
Answer: hi = 0.9 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/(−30) − 1/20
di = −12 cm
Magnification and height
m = −(−12)/20 = 0.6
hi = 0.6·1.5 = 0.9 cm
Answer
hi = 0.9 cm
20.Waves, sound & optics
Answer: y5 = 49.08 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …