Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 25 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 5 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 25 m/sapolice = 5 m/s²v0,police = 0
d = m
2.KinematicsHard
Ball A is dropped from rest from a height of 35 m. At the same instant ball B is thrown straight up from the ground directly below at 25 m/s. Ignore air resistance and use g = 9.81 m/s². When do the balls meet? Find t.
H = 35 mv0B = 25 m/sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 50 kg box is pushed up a ramp at 40° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the pushing force F.
m = 50 kgθ = 40°μ = 0.3g = 9.81 m/s²
F = N
4.Newton’s lawsHard
A 2.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 6 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 2.5 kgm2 = 6 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 45° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 14 m/sθ = 45°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 35 m/s and 15° above the horizontal from the top of a 45 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?
v₀ = 35 m/sθ = 15°h = 45 mg = 9.81 m/s²
α = °
7.Work & energyMedium
A 2.5 kg block slides 17 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.4. Find the work Wf done against friction.
m = 2.5 kgθ = 35°μ = 0.4d = 17 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
A 2 kg cart is released from rest at a height of 12.8 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 2 kgh = 12.8 mR = 4 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 1600 kg car moving at 13 m/s runs into a stationary 1800 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?
m1 = 1600 kgv1 = 13 m/sm2 = 1800 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
A 0.5 kg ball hits a wall at 14 m/s and bounces straight back at 14 m/s. The contact lasts 5 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.5 kgvin = 14 m/svout = 14 m/sΔt = 5 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 150 mm to 100 mm. In the wide section the pressure is 170 kPa and the velocity is 2.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 200 mm to 100 mm while rising 1 m. At section 1 the pressure is 270 kPa and the velocity is 2.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 475 °C and a cold reservoir at 30 °C. Find the highest possible thermal efficiency ηmax.
TH = 475 °CTL = 30 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A heat pump keeps a house at 22 °C while it is -5 °C outside, delivering 14 kW of heat to the house. Find the minimum power input Ẇmin.
TH = 22 °CTL = -5 °CQ̇H = 14 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An observer moves at 5 m/s away from a stationary source of 1000 Hz. The speed of sound is 343 m/s. Find the frequency f′ that the observer hears.
f = 1000 Hzv = 343 m/svo = 5 m/s
f′ = Hz
20.Waves, sound & opticsHard
An optical fibre has a core with n₁ = 1.52 and a cladding with n₂ = 1.5. Find the largest angle θa to the fibre axis at which light from air can enter the end of the fibre and still be guided by total internal reflection.
n1 = 1.52n2 = 1.5n0 = 1.00
θa = °
3Solutions
1.Kinematics
Answer: d = 250 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·25/5 = 10 s
Distance
d = v·t = 25·10 = 250 m
Answer
d = 250 m
At that moment the police car moves at 2v = 50 m/s.
2.Kinematics
Answer: t = 1.4 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Meeting time
Up is positive, the ground is y = 0.
35 − ½g·t² = 25·t − ½g·t² → t = 35/25 = 1.4 s
Answer
t = 1.4 s
3.Newton’s laws
Answer: F = 428 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the slope
Constant speed: the forces balance.
F = m·g·sin θ + μ·m·g·cos θ
Pushing force
F = 315.3 + 112.7 = 428 N
Answer
F = 428 N
4.Newton’s laws
Answer: a = 6.059 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 14·cos 45° = 9.899 m/s
vy = v0·sin θ = 14·sin 45° = 9.899 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 9.899²/(2·9.81) = 4.995 m
Answer
H = 4.995 m
6.Projectile motion
Answer: α = 42.58 °
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 35·cos 15° = 33.81 m/s
vy0 = 35·sin 15° = 9.059 m/s
Vertical speed at impact
Energy or v² = v₀² + 2as in the vertical direction.
vy = √(9.059² + 2·9.81·45) = 31.06 m/s
Impact angle
tan α = vy/vx = 31.06/33.81 → α = 42.58°
Answer
α = 42.58°
7.Work & energy
Answer: Wf = 136.6 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 24.53·0.8192 = 20.09 N
F = μN = 0.4·20.09 = 8.036 N
Work against friction
Wf = F·d = 8.036·17 = 136.6 J
Answer
Wf = 136.6 J
8.Work & energy
Answer: N = 27.47 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(12.8 − 8) = 94.18 m²/s²
Forces at the top
m·g = 2·9.81 = 19.62 N
N = mv²/R − mg = 2·94.18/4 − 19.62 = 27.47 N
Answer
N = 27.47 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: ΔK = 71576 J
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Common velocity
v′ = m1·v1/(m1 + m2) = 1600·13/3400 = 6.118 m/s
Kinetic energy before and after
Kbefore = ½·1600·13² = 135200 J
Kafter = ½·3400·6.118² = 63624 J
Energy lost
ΔK = 135200 − 63624 = 71576 J
Answer
ΔK = 71576 J
The lost energy goes into deformation, heat and sound.
10.Momentum & collisions
Answer: J = 14 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.5·(14 + 14) = 14 N·s
Answer
J = 14 N·s
11.Hydrostatic force
Answer: F = 71.74 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1.5/2 = 3.25 m
A = H·b = 1.5·1.5 = 2.25 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.25·2.25 = 71.74 kN
Answer
F = 71.74 kN
12.Hydrostatic force
Answer: ycp = 1.083 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 0.5 + 1/2 = 1 m
A = H·b = 1·2 = 2 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·1·2 = 19.62 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 2·1³/12 = 0.1667 m⁴
ycp = yc + Ic/(yc·A) = 1 + 0.1667/(1·2) = 1.083 m
Answer
ycp = 1.083 m
13.Continuity & Bernoulli
Answer: p2 = 154.6 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 475 + 273.15 = 748.1 K
TL = 30 + 273.15 = 303.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 303.1/748.1 = 59.48 %
Answer
ηmax = 59.48 %
18.Heat engines & refrigerators
Answer: Ẇmin = 1.281 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇H/COP = 14/10.93 = 1.281 kW
Answer
Ẇmin = 1.281 kW
19.Waves, sound & optics
Answer: f′ = 985.4 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.