Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 45 km/h brakes with a constant deceleration of 4 m/s² until it stops. Find the braking distance s.
v₀ = 45 km/ha = −4 m/s²v = 0
s = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 24 m/s² for 1 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 24 m/s²t1 = 1 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 3 kg block slides down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.25. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 3 kgθ = 25°μ = 0.25g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 75 N pulls the front 12 kg block; the 1 kg block is towed behind. The coefficient of kinetic friction is 0.25 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.
m1 = 1 kgm2 = 12 kgF = 75 Nμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 65° above horizontal from level ground. Ignore air resistance. Find the maximum height H the ball reaches.
v0 = 10 m/sθ = 65°g = 9.81 m/s²
H = m
6.Projectile motionHard
A ball is launched at 35° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 31 m/sθ = 35°h = 60 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A block slides from rest down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 3 m along the slope.
θ = 40°μ = 0.3d = 3 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 1 kg cart is released from rest at a height of 9 m on a smooth track that leads into a vertical circular loop of radius 2 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 1 kgh = 9 mR = 2 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 4 kg glider moving at 11 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4 kgm2 = 3.5 kgv1 = 11 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 12 g bullet is fired horizontally into a 1.5 kg block hanging from light strings 0.8 m long, and stays in it. The strings swing out to a largest angle of 25° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 12 gM = 1.5 kgL = 0.8 mθ = 25°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 4 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 4 mH = 2 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water flows through a horizontal pipe that narrows from 100 mm to 50 mm. In the wide section the pressure is 160 kPa and the velocity is 2 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A closed water tank has compressed air above the water at a gauge pressure of 150 kPa. Water leaves through an opening with a diameter of 30 mm, 2 m below the water surface, into the open air. Ignoring losses, find the jet velocity v. Use g = 9.81 m/s².
A reversible (Carnot) heat engine takes in 3800 kJ of heat from a reservoir at 800 °C and rejects 1144 kJ per cycle. Find the temperature TL of the cold reservoir in °C.
TH = 800 °CQH = 3800 kJQL = 1144 kJ
TL = °C
18.Heat engines & refrigeratorsHard
A heat pump keeps a house at 21 °C while it is 2 °C outside, delivering 15 kW of heat to the house. Find the minimum power input Ẇmin.
TH = 21 °CTL = 2 °CQ̇H = 15 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An observer moves at 20 m/s away from a stationary source of 1200 Hz. The speed of sound is 343 m/s. Find the frequency f′ that the observer hears.
f = 1200 Hzv = 343 m/svo = 20 m/s
f′ = Hz
20.Waves, sound & opticsHard
A grating with 1200 lines per millimetre shows the order-1 maximum of a spectral line at 35.7° from the straight-through direction. Find the wavelength λ of the line.
N = 1200 mm⁻¹θ1 = 35.7°m = 1
λ = nm
3Solutions
1.Kinematics
Answer: s = 19.53 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 45/3.6 = 12.5 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 12.5²/(2·4) = 19.53 m
Answer
s = 19.53 m
2.Kinematics
Answer: hmax = 41.36 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 24·1 = 24 m/s
h₁ = ½·24·1² = 12 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 24²/(2·9.81) = 29.36 m
hmax = 12 + 29.36 = 41.36 m
Answer
hmax = 41.36 m
3.Newton’s laws
Answer: a = 1.923 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 10·cos 65° = 4.226 m/s
vy = v0·sin θ = 10·sin 65° = 9.063 m/s
Highest point
At the top the vertical velocity is zero: vy² = 2gH.
H = vy²/(2g) = 9.063²/(2·9.81) = 4.187 m
Answer
H = 4.187 m
6.Projectile motion
Answer: x = 146.1 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 31·cos 35° = 25.39 m/s
vy = v0·sin θ = 31·sin 35° = 17.78 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 60 + 17.78·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (17.78 + √(316.2 + 1177))/9.81 = 5.752 s
Horizontal distance
x = vx·t = 25.39·5.752 = 146.1 m
Answer
x = 146.1 m
7.Work & energy
Answer: v = 4.93 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·3·(0.6428 − 0.3·0.766)) = 4.93 m/s
Answer
v = 4.93 m/s
8.Work & energy
Answer: N = 39.24 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(9 − 4) = 98.1 m²/s²
Forces at the top
m·g = 1·9.81 = 9.81 N
N = mv²/R − mg = 1·98.1/2 − 9.81 = 39.24 N
Answer
N = 39.24 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′1 = 0.7333 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4 − 3.5)/(4 + 3.5)·11 = 0.7333 m/s
v′2 = 2·4/(4 + 3.5)·11 = 11.73 m/s
Answer
v′1 = 0.7333 m/s
10.Momentum & collisions
Answer: v = 152.8 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 0.8·(1 − cos 25°) = 0.07495 m
Speed after impact
V = √(2·9.81·0.07495) = 1.213 m/s
Collision
v = (m + M)·V/m = 1.512·1.213/0.012 = 152.8 m/s
Answer
v = 152.8 m/s
11.Hydrostatic force
Answer: F = 95.65 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1.5/2 = 3.25 m
A = H·b = 1.5·2 = 3 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3.25·3 = 95.65 kN
Answer
F = 95.65 kN
12.Hydrostatic force
Answer: ycp = 5.067 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 4 + 2/2 = 5 m
A = H·b = 2·2 = 4 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·5·4 = 172.7 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Ic = b·H³/12 = 2·2³/12 = 1.333 m⁴
ycp = yc + Ic/(yc·A) = 5 + 1.333/(5·4) = 5.067 m
Answer
ycp = 5.067 m
13.Continuity & Bernoulli
Answer: p2 = 130 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli
Work in Pa, then divide by 1000 to get kPa.
v2 = v1·(d1/d2)² = 2·(100/50)² = 8 m/s
½ρ(v1² − v2²) = ½·1000·(2² − 8²)/1000 = −30 kPa
p2 = p1 + ½ρ(v1² − v2²) = 160 + (−30) = 130 kPa
Answer
p2 = 130 kPa
14.Continuity & Bernoulli
Answer: v = 18.42 m/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Bernoulli from the surface to the jet
v = √(2·(150000/1000 + 9.81·2)) = 18.42 m/s
Answer
v = 18.42 m/s
15.Ideal gas law
Answer: P = 1357 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 490/44.01 = 11.13 mol
T = 20 + 273.15 = 293.1 K
Pressure
P = nRT/V = 11.13·8.314·293.1/0.02 = 1357 kPa
Answer
P = 1357 kPa
16.Ideal gas law
Answer: ρ = 7.274 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 190 + 273.15 = 463.1 K
Density
ρ = 1000·28.01/(8.314·463.1) = 7.274 kg/m³
Answer
ρ = 7.274 kg/m³
17.Heat engines & refrigerators
Answer: TL = 49.92 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperature of the source
TH = 800 + 273.15 = 1073 K
Reversible heat ratio
TL = TH·QL/QH = 1073·1144/3800 = 323.1 K = 49.92 °C
Answer
TL = 49.92 °C
18.Heat engines & refrigerators
Answer: Ẇmin = 0.9689 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇H/COP = 15/15.48 = 0.9689 kW
Answer
Ẇmin = 0.9689 kW
19.Waves, sound & optics
Answer: f′ = 1130 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …