Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
policea = 4 m/s²car17 m/s

A car speeding at a constant 17 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 4 m/s². How long does it take the police car to catch up? Find t.

vcar = 17 m/sapolice = 4 m/s²v0,police = 0
t = s
2.KinematicsHard
v₀ = 8 m/s15 m

A ball is thrown straight up at 8 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 8 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
7 kg3.5 kg

Masses of 7 kg and 3.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 7 kgm2 = 3.5 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
θ = 15°blockv₀ = 11 m/s

A block is given a push so that it starts sliding up a ramp at 15° with a speed of 11 m/s. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². How far d along the ramp does it slide before it stops?

v₀ = 11 m/sθ = 15°μ = 0.3g = 9.81 m/s²
d = m
5.Projectile motionMedium
9 my = ?v0​ = 16 m/s60°

A ball is kicked from level ground at 16 m/s and 60° above the horizontal towards a wall 9 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 16 m/sθ = 60°x = 9 mg = 9.81 m/s²
y = m
6.Projectile motionHard
h = 60 mv0​ = 32 m/s50°x = ?

A ball is launched at 50° above horizontal from the top of a 60 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 32 m/sθ = 50°h = 60 mg = 9.81 m/s²
x = m
7.Work & energyMedium
72 km/h2°1200 kg

A 1200 kg car drives up a 2° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 300 N. Find the power P the wheels must deliver, in kW.

m = 1200 kgθ = 2°Fr = 300 Nv = 72 km/hg = 9.81 m/s²
P = kW
8.Work & energyHard
F = 80 N35°μ = 0.255 kg

A 5 kg block starts from rest at the bottom of a 35° slope and is pulled up the slope by a constant force of 80 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 2 m up the slope.

m = 5 kgF = 80 Nθ = 35°μ = 0.25d = 2 mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
2 kgv = ?8 gh = 18 cm

An 8 g bullet is fired horizontally into a 2 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 18 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 2 kgh = 18 cmg = 9.81 m/s²
v = m/s
10.Momentum & collisionsHard
14 m/s19 m/s

A 0.55 kg ball hits a wall at 14 m/s and bounces straight back at 19 m/s. The contact lasts 10 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.55 kgvin = 14 m/svout = 19 m/sΔt = 10 ms
J = N·s
11.Hydrostatic forceMedium
gated = 1.5 mH = 2 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1.5 mH = 2 mb = 2 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 3 mH = 2.5 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of glycerin, with its top edge 3 m below the surface. Find the depth ycp of the centre of pressure below the surface.

d = 3 mH = 2.5 mb = 1 mρ = 1260 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
12d1​ = 150 mm, p1​ = 340 kPad2​ = 100 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 150 mm to 100 mm. In the wide section the pressure is 340 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 150 mmd2 = 100 mmp1 = 340 kPav1 = 0.75 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
d1​ = 100 mmd2​ = 50 mm12Δh = 330 mmmercuryQ = ?

A horizontal venturi meter (inlet 100 mm, throat 50 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 330 mm. The discharge coefficient is 0.98. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².

d1 = 100 mmd2 = 50 mmΔh = 330 mmCd = 0.98ρHg = 13 600 kg/m³g = 9.81 m/s²
Q = L/s
15.Ideal gas lawMedium
400 g of N₂V = 50 LT = 10 °CP = ?

A tank of 50 L contains 400 g of N₂ at 10 °C. Treat it as an ideal gas and find the pressure P.

m = 400 gM = 28.01 g/molV = 50 LT = 10 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of Ar goes from 400 kPa, 10 L, 35 °C to 450 kPa and 140 °C. Find the new volume V2.

P1 = 400 kPaV1 = 10 LT1 = 35 °CP2 = 450 kPaT2 = 140 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 400 °CTL​ = 30 °CEQH​QL​η = 22%

A heat engine receives heat from a source at 400 °C and rejects heat to the surroundings at 30 °C. Its actual thermal efficiency is 22%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.

TH = 400 °CTL = 30 °Cη = 22%
ηII = %
18.Heat engines & refrigeratorsHard
TH​ = 850 °CT0​ = 30 °CTL​ = -5 °CERWQ̇H​ = 170 kWQ̇L​ = ?

A Carnot heat engine receives 170 kW of heat from a source at 850 °C and rejects heat to the surroundings at 30 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at -5 °C and also rejects heat to the surroundings at 30 °C. Find the rate Q̇L at which heat is removed from the freezer.

TH = 850 °CT0 = 30 °CTL = -5 °CQ̇H = 170 kW
Q̇L = kW
19.Waves, sound & opticsMedium
θc = ?90°acrylic, n1​ = 1.49water, n2​ = 1.33

Light travels in acrylic (n = 1.49) towards a flat boundary with water (n = 1.33). Find the critical angle θc beyond which it is totally reflected.

n1 = 1.49n2 = 1.33
θc = °
20.Waves, sound & opticsHard
SO25 m/sf = 20 kHz

A parking sensor at rest sends ultrasound of 20 kHz towards a car that approaches at 25 m/s. Find the frequency f″ of the echo received back at the sensor (speed of sound 343 m/s).

f = 20 kHzu = 25 m/sv = 343 m/s
f″ = Hz

3Solutions

1.Kinematics

Answer: t = 8.5 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·17/4 = 8.5 s

Answer

t = 8.5 s

At that moment the police car moves at 2v = 34 m/s.

2.Kinematics

Answer: t = 2.745 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−15 = 8·t − ½·9.81·t²
4.905·t² − 8·t − 15 = 0

Solve the quadratic

Only the positive root is physical.

t = (8 + √(8² + 2·9.81·15))/9.81 = 2.745 s

Answer

t = 2.745 s
3.Newton’s laws

Answer: T = 45.78 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration

The net driving force is the difference of the weights; it moves the total mass.

a = (7 − 3.5)·9.81/(7 + 3.5) = 3.27 m/s²

Tension from the lighter mass

T − m2·g = m2·a → T = 3.5·(9.81 + 3.27) = 45.78 N

Answer

T = 45.78 N
4.Newton’s laws

Answer: d = 11.24 m

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Deceleration

Both forces point down the slope; the mass cancels.

a = 9.81·(sin 15° + 0.3·cos 15°) = 5.382 m/s²

Distance

d = v₀²/(2a) = 11²/(2·5.382) = 11.24 m

Answer

d = 11.24 m
5.Projectile motion

Answer: y = 9.381 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 16·cos 60° = 8 m/s
t = x/vx = 9/8 = 1.125 s

Height at that time

y = 13.86·1.125 − ½·9.81·1.125² = 9.381 m

Answer

y = 9.381 m

The ball is still rising at the wall.

6.Projectile motion

Answer: x = 139.8 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 32·cos 50° = 20.57 m/s
vy = v0·sin θ = 32·sin 50° = 24.51 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 60 + 24.51·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (24.51 + √(600.9 + 1177))/9.81 = 6.797 s

Horizontal distance

x = vx·t = 20.57·6.797 = 139.8 m

Answer

x = 139.8 m
7.Work & energy

Answer: P = 14.22 kW

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.

Driving force

m·g = 1200·9.81 = 11772 N
mg·sin θ = 11772·sin 2° = 410.8 N
F = 410.8 + 300 = 710.8 N

Power

v = 72/3.6 = 20 m/s
P = F·v = 710.8·20 = 14217 W = 14.22 kW

Answer

P = 14.22 kW
8.Work & energy

Answer: v = 5.784 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Forces along the slope

m·g = 5·9.81 = 49.05 N
mg·sin θ = 28.13 N
μ·mg·cos θ = 10.04 N

Work–energy

½mv² = (80 − 38.18)·2 = 83.64 J
v = √(2·83.64/5) = 5.784 m/s

Answer

v = 5.784 m/s
9.Momentum & collisions

Answer: v = 471.7 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.18) = 1.879 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 2)·1.879/0.008 = 471.7 m/s

Answer

v = 471.7 m/s
10.Momentum & collisions

Answer: J = 18.15 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.55·(19 + 14) = 18.15 N·s

Answer

J = 18.15 N·s
11.Hydrostatic force

Answer: F = 98.1 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1.5 + 2/2 = 2.5 m
A = H·b = 2·2 = 4 m²
gated = 1.5 mH = 2 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2.5·4 = 98.1 kN

Answer

F = 98.1 kN
12.Hydrostatic force

Answer: ycp = 4.373 m

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 3 + 2.5/2 = 4.25 m
A = H·b = 2.5·1 = 2.5 m²
gated = 3 mH = 2.5 mF

Resultant force

F = ρ·g·yc·A = 1260·9.81·4.25·2.5 = 131.3 kN

Centre of pressure

Pressure grows with depth, so the resultant acts below the centroid.

Ic = b·H³/12 = 1·2.5³/12 = 1.302 m⁴
ycp = yc + Ic/(yc·A) = 4.25 + 1.302/(4.25·2.5) = 4.373 m

Answer

ycp = 4.373 m
13.Continuity & Bernoulli

Answer: p2 = 338.9 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.75·(150/100)² = 1.688 m/s
½ρ(v1² − v2²) = ½·1000·(0.75² − 1.688²)/1000 = −1.143 kPa
p2 = p1 + ½ρ(v1² − v2²) = 340 + (−1.143) = 338.9 kPa

Answer

p2 = 338.9 kPa
14.Continuity & Bernoulli

Answer: Q = 17.95 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Pressure difference from the manometer

Δp = (13600 − 1000)·9.81·0.33 = 40790 Pa

Throat velocity

Continuity and Bernoulli together give the ideal throat velocity.

β = 50/100 = 0.5
v2 = √(2·40790/(1000·(1 − 0.0625))) = 9.328 m/s

Actual flow rate

Q = Cd·A2·v2 = 0.98·0.001963·9.328 = 0.01795 m³/s = 17.95 L/s

Answer

Q = 17.95 L/s
15.Ideal gas law

Answer: P = 672.4 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 400/28.01 = 14.28 mol
T = 10 + 273.15 = 283.1 K

Pressure

P = nRT/V = 14.28·8.314·283.1/0.05 = 672.4 kPa

Answer

P = 672.4 kPa
16.Ideal gas law

Answer: V2 = 11.92 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 308.1 K, T2 = 413.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 10·(400/450)·(413.1/308.1) = 11.92 L

Answer

V2 = 11.92 L
17.Heat engines & refrigerators

Answer: ηII = 40.03 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 400 + 273.15 = 673.1 K
TL = 30 + 273.15 = 303.1 K

Carnot efficiency

ηCarnot = 1 − 303.1/673.1 = 54.97 %

Second-law efficiency

ηII = η/ηCarnot = 22/54.97 = 40.03 %

Answer

ηII = 40.03 %
18.Heat engines & refrigerators

Answer: Q̇L = 950.9 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 850 + 273.15 = 1123 K
T0 = 30 + 273.15 = 303.1 K
TL = -5 + 273.15 = 268.1 K

Engine work

η = 1 − 303.1/1123 = 0.7301
Ẇ = 0.7301·170 = 124.1 kW

Heat removed by the refrigerator

COPR = 268.1/(303.1 − 268.1) = 7.661
Q̇L = 7.661·124.1 = 950.9 kW

Answer

Q̇L = 950.9 kW
19.Waves, sound & optics

Answer: θc = 63.2 °

Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.

Refraction at 90°

sin θc = n₂/n₁ = 1.33/1.49 = 0.8926

Critical angle

θc = arcsin(0.8926) = 63.2°

Answer

θc = 63.2°
20.Waves, sound & optics

Answer: f″ = 23145 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 20000·(343 + 25)/343 = 21458 Hz

Frequency of the echo

f″ = f′·343/(343 − 25) = 23145 Hz

Answer

f″ = 23145 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers