Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 80 km/h brakes with a constant deceleration of 5.5 m/s² until it stops. Find the braking distance s.
v₀ = 80 km/ha = −5.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 11 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 11 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
Masses of 10 kg and 5.5 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the acceleration a of the masses.
m1 = 10 kgm2 = 5.5 kgg = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 1.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 0.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 1.5 kgm2 = 0.5 kgμ = 0.25g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched at 50° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 26 m/sθ = 50°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 25° above horizontal from the top of a 35 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 11 m/sθ = 25°h = 35 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A block slides from rest down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 7 m along the slope.
θ = 30°μ = 0.3d = 7 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 10 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3 m long (μ = 0.15) and then runs onto a spring (k = 800 N/m) on a smooth surface. Find the speed v of the block when it reaches the spring.
m = 10 kgh = 5 mL = 3 mμ = 0.15k = 800 N/mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
A 0.5 kg glider moving at 7 m/s makes a perfectly elastic head-on collision with a 2.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 0.5 kgm2 = 2.5 kgv1 = 7 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
At a crossing a 1800 kg car travelling east at 11 m/s collides with a 2000 kg car travelling north at 22 m/s. The cars lock together. Find the speed v′ of the wreck just after the collision.
m1 = 1800 kgv1 = 11 m/s (E)m2 = 2000 kgv2 = 22 m/s (N)
v′ = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 2 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
d = 3 mH = 2 mb = 2 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
A vertical rectangular gate 1 m wide sits in the wall of a tank of glycerin, with its top edge 3 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal pipe that narrows from 75 mm to 25 mm. In the wide section the pressure is 380 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.
Water flows up through a pipe that narrows from 75 mm to 50 mm while rising 9 m. At section 1 the pressure is 360 kPa and the velocity is 2.25 m/s. Ignoring losses, find the pressure p2 at section 2.
A reversible (Carnot) heat engine takes in 500 kJ of heat from a reservoir at 725 °C and rejects 147 kJ per cycle. Find the temperature TL of the cold reservoir in °C.
TH = 725 °CQH = 500 kJQL = 147 kJ
TL = °C
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 4 °C in a kitchen at 25 °C, removing heat from the cold space at 1.5 kW. Find the highest possible coefficient of performance COPmax.
TH = 25 °CTL = 4 °CQ̇L = 1.5 kW
COPmax =
19.Waves, sound & opticsMedium
An object 2 cm tall stands 15 cm in front of a thin converging lens with a focal length of 5 cm. Find the image height hi (negative for an inverted image).
ho = 2 cmdo = 15 cmf = 5 cm
hi = cm
20.Waves, sound & opticsHard
Light of wavelength 650 nm passes through a single slit 0.12 mm wide. Find the angle θ3 of dark fringe number 3 from the straight-through direction.
λ = 650 nma = 0.12 mmm = 3
θ3 = °
3Solutions
1.Kinematics
Answer: s = 44.89 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 80/3.6 = 22.22 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 22.22²/(2·5.5) = 44.89 m
Answer
s = 44.89 m
2.Kinematics
Answer: t = 3.199 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−15 = 11·t − ½·9.81·t²
4.905·t² − 11·t − 15 = 0
Solve the quadratic
Only the positive root is physical.
t = (11 + √(11² + 2·9.81·15))/9.81 = 3.199 s
Answer
t = 3.199 s
3.Newton’s laws
Answer: a = 2.848 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (10 − 5.5)·9.81/(10 + 5.5) = 2.848 m/s²
Answer
a = 2.848 m/s²
4.Newton’s laws
Answer: a = 0.6131 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 26·cos 50° = 16.71 m/s
vy = v0·sin θ = 26·sin 50° = 19.92 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·19.92/9.81 = 4.061 s
Horizontal distance
x = vx·t = 16.71·4.061 = 67.86 m
Answer
x = 67.86 m
6.Projectile motion
Answer: x = 31.77 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 11·cos 25° = 9.969 m/s
vy = v0·sin θ = 11·sin 25° = 4.649 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 35 + 4.649·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (4.649 + √(21.61 + 686.7))/9.81 = 3.187 s
Horizontal distance
x = vx·t = 9.969·3.187 = 31.77 m
Answer
x = 31.77 m
7.Work & energy
Answer: v = 5.744 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·7·(0.5 − 0.3·0.866)) = 5.744 m/s
Answer
v = 5.744 m/s
8.Work & energy
Answer: v = 9.448 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 98.1·(5 − 0.15·3) = 446.4 J
Speed at the spring
½mv² = mg(h − μL) → v = √(2g(h − μL)) = √(2·9.81·4.55) = 9.448 m/s
Answer
v = 9.448 m/s
9.Momentum & collisions
Answer: v′1 = −4.667 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 2.5)/(0.5 + 2.5)·7 = −4.667 m/s
v′2 = 2·0.5/(0.5 + 2.5)·7 = 2.333 m/s
Answer
v′1 = −4.667 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: v′ = 12.7 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperature of the source
TH = 725 + 273.15 = 998.1 K
Reversible heat ratio
TL = TH·QL/QH = 998.1·147/500 = 293.5 K = 20.31 °C
Answer
TL = 20.31 °C
18.Heat engines & refrigerators
Answer: COPmax = 13.2
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/5 − 1/15
di = 7.5 cm
Magnification and height
m = −7.5/15 = −0.5
hi = −0.5·2 = −1 cm
Answer
hi = −1 cm
20.Waves, sound & optics
Answer: θ3 = 0.9311 °
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …