Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 50 km/h brakes with a constant deceleration of 3.5 m/s² until it stops. Find the braking distance s.
v₀ = 50 km/ha = −3.5 m/s²v = 0
s = m
2.KinematicsHard
A ball is thrown straight up at 9 m/s from the edge of a roof 15 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 9 m/sh₀ = 15 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
An 18 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 18 kgθ = 45°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 7 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.
m1 = 7 kgm2 = 5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
A ball is launched from level ground at 20 m/s and must land 35 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.
v₀ = 20 m/sR = 35 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
A ball is thrown from ground level at 32 m/s and 70° above the horizontal. It lands on the flat roof of a building 30 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 32 m/sθ = 70°hroof = 30 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 1000 kg car drives up an 8° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 250 N. Find the power P the wheels must deliver, in kW.
A 0.5 kg cart is released from rest at a height of 14 m on a smooth track that leads into a vertical circular loop of radius 4 m. Find the normal force N the track exerts on the cart at the top of the loop.
m = 0.5 kgh = 14 mR = 4 mg = 9.81 m/s²
N = N
9.Momentum & collisionsMedium
A 0.5 kg glider moving at 12 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′2 of the second glider after the collision.
m1 = 0.5 kgm2 = 5 kgv1 = 12 m/sv2 = 0
v′2 = m/s
10.Momentum & collisionsHard
A 900 kg car runs into a parked 1800 kg car. The wrecks lock together and skid 23 m before stopping. The coefficient of kinetic friction between tyres and road is 0.75. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 2 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 2 mH = 1 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water flows through a horizontal pipe that narrows from 150 mm to 40 mm. In the wide section the pressure is 270 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.
A hose with an inner diameter of 20 mm siphons water from an open tank. The highest point C of the hose is 1.5 m above the water surface, and the outlet (open to the air) is 2 m below the water surface. Ignore losses and take g = 9.81 m/s². Find the absolute pressure pC at point C. The atmospheric pressure is 101.3 kPa.
A heat engine receives heat from a source at 800 °C and rejects heat to the surroundings at 35 °C. Its actual thermal efficiency is 39%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.
TH = 800 °CTL = 35 °Cη = 39%
ηII = %
18.Heat engines & refrigeratorsHard
A Carnot heat engine receives 190 kW of heat from a source at 850 °C and rejects heat to the surroundings at 30 °C. All of its work drives a Carnot refrigerator that removes heat from a freezer at -15 °C and also rejects heat to the surroundings at 30 °C. Find the rate Q̇L at which heat is removed from the freezer.
TH = 850 °CT0 = 30 °CTL = -15 °CQ̇H = 190 kW
Q̇L = kW
19.Waves, sound & opticsMedium
An object stands 50 cm in front of a thin converging lens with a focal length of 15 cm. Find the image distance di. Use the sign convention 1/f = 1/do + 1/di (f < 0 for a diverging lens, di < 0 for a virtual image).
do = 50 cmf = 15 cm
di = cm
20.Waves, sound & opticsHard
Light of wavelength 550 nm falls on two slits 0.2 mm apart. The screen is 1.2 m away. Find the distance y2 from the central bright fringe to bright fringe number 2.
λ = 550 nmd = 0.2 mmL = 1.2 mm = 2
y2 = mm
3Solutions
1.Kinematics
Answer: s = 27.56 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 50/3.6 = 13.89 m/s
Braking distance
0 = v₀² − 2·a·s → s = v₀²/(2a) = 13.89²/(2·3.5) = 27.56 m
Answer
s = 27.56 m
2.Kinematics
Answer: t = 2.892 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−15 = 9·t − ½·9.81·t²
4.905·t² − 9·t − 15 = 0
Solve the quadratic
Only the positive root is physical.
t = (9 + √(9² + 2·9.81·15))/9.81 = 2.892 s
Answer
t = 2.892 s
3.Newton’s laws
Answer: a = 4.856 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Range formula
R = v₀²·sin 2θ/g → sin 2θ = 9.81·35/20² = 0.8584
Angle
2θ = 59.13° → θ = 29.57°
Answer
θ = 29.57°
The other solution is 90° − θ = 60.43°.
6.Projectile motion
Answer: x = 53.37 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 10.94 m/s, vy = 30.07 m/s
Time to land on the roof
Larger root: the ball is descending.
30 = 30.07·t − 4.905·t²
t = (30.07 + √(30.07² − 2·9.81·30))/9.81 = 4.876 s
Horizontal distance
x = vx·t = 10.94·4.876 = 53.37 m
Answer
x = 53.37 m
7.Work & energy
Answer: P = 32.31 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1000·9.81 = 9810 N
mg·sin θ = 9810·sin 8° = 1365 N
F = 1365 + 250 = 1615 N
Power
v = 72/3.6 = 20 m/s
P = F·v = 1615·20 = 32306 W = 32.31 kW
Answer
P = 32.31 kW
8.Work & energy
Answer: N = 9.81 N
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.
Speed at the top
v² = 2g(h − 2R) = 2·9.81·(14 − 8) = 117.7 m²/s²
Forces at the top
m·g = 0.5·9.81 = 4.905 N
N = mv²/R − mg = 0.5·117.7/4 − 4.905 = 9.81 N
Answer
N = 9.81 N
The cart just makes it round when h = 2.5R; then N = 0 at the top.
9.Momentum & collisions
Answer: v′2 = 2.182 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (0.5 − 5)/(0.5 + 5)·12 = −9.818 m/s
v′2 = 2·0.5/(0.5 + 5)·12 = 2.182 m/s
Answer
v′2 = 2.182 m/s
10.Momentum & collisions
Answer: v1 = 55.19 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Velocity in the hose
Surface and outlet are both open to the air, so the pressure terms cancel.
If this pressure falls to the vapour pressure of the water, the siphon stops working.
15.Ideal gas law
Answer: P = 293.6 kPa
Ideal gas law: PV = nRT, with n = m/M.
Moles
n = m/M = 110/32 = 3.438 mol
T = 35 + 273.15 = 308.1 K
Pressure
P = nRT/V = 3.438·8.314·308.1/0.03 = 293.6 kPa
Answer
P = 293.6 kPa
16.Ideal gas law
Answer: ρ = 9.262 kg/m³
Ideal gas density: ρ = PM/(RT).
Rearrange the gas law
PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 90 + 273.15 = 363.1 K
Density
ρ = 700·39.95/(8.314·363.1) = 9.262 kg/m³
Answer
ρ = 9.262 kg/m³
17.Heat engines & refrigerators
Answer: ηII = 54.71 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 800 + 273.15 = 1073 K
TL = 35 + 273.15 = 308.1 K
Carnot efficiency
ηCarnot = 1 − 308.1/1073 = 71.29 %
Second-law efficiency
ηII = η/ηCarnot = 39/71.29 = 54.71 %
Answer
ηII = 54.71 %
18.Heat engines & refrigerators
Answer: Q̇L = 795.8 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 850 + 273.15 = 1123 K
T0 = 30 + 273.15 = 303.1 K
TL = -15 + 273.15 = 258.1 K
Engine work
η = 1 − 303.1/1123 = 0.7301
Ẇ = 0.7301·190 = 138.7 kW
Heat removed by the refrigerator
COPR = 258.1/(303.1 − 258.1) = 5.737
Q̇L = 5.737·138.7 = 795.8 kW
Answer
Q̇L = 795.8 kW
19.Waves, sound & optics
Answer: di = 21.43 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/15 − 1/50
di = 21.43 cm
Ray diagram
real, on the far side of the lens
Answer
di = 21.43 cm
20.Waves, sound & optics
Answer: y2 = 6.6 mm
Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …