Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 18 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 18 m/sapolice = 3 m/s²v0,police = 0
d = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 38 m/s² for 1.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax the rocket reaches.
a = 38 m/s²t1 = 1.5 sg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
A 17 kg block slides down a slope at 40° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 17 kgθ = 40°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 9.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 9.5 kgm2 = 3 kgμ = 0.2g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is kicked from level ground at 18 m/s and 65° above the horizontal towards a wall 18 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 18 m/sθ = 65°x = 18 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 40° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 12 m/sθ = 40°h = 30 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 1800 kg car drives up an 8° slope at a constant 72 km/h. Air resistance and rolling resistance together amount to 200 N. Find the power P the wheels must deliver, in kW.
A 2.5 kg block is released from rest at height 2.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.2) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 2.5 kgh = 2.5 mL = 1.5 mμ = 0.2k = 2500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 3.5 kg glider moving at 7 m/s makes a perfectly elastic head-on collision with a 2 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 3.5 kgm2 = 2 kgv1 = 7 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 0.3 kg ball hits a wall at 22 m/s and bounces straight back at 18 m/s. The contact lasts 5 ms. Find the average force Favg of the wall on the ball.
m = 0.3 kgvin = 22 m/svout = 18 m/sΔt = 5 ms
Favg = N
11.Hydrostatic forceMedium
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 2 m wide sits in the wall of a tank of glycerin, with its top edge 1.5 m below the surface. Find the depth ycp of the centre of pressure below the surface.
Water flows through a horizontal venturi meter with an inlet diameter of 200 mm and a throat diameter of 100 mm. The pressure at the inlet is 19 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
A horizontal venturi meter (inlet 150 mm, throat 75 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 300 mm. The discharge coefficient is 0.96. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².
A heat engine receives heat from a source at 600 °C and rejects heat to the surroundings at 35 °C. Its actual thermal efficiency is 39%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.
TH = 600 °CTL = 35 °Cη = 39%
ηII = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 5 °C in a kitchen at 30 °C, removing heat from the cold space at 3.5 kW. Find the minimum power input Ẇmin.
TH = 30 °CTL = 5 °CQ̇L = 3.5 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An object stands 30 cm in front of a thin diverging lens with a focal length of 5 cm. Find the image distance di. Use the sign convention 1/f = 1/do + 1/di (f < 0 for a diverging lens, di < 0 for a virtual image).
do = 30 cmf = −5 cm
di = cm
20.Waves, sound & opticsHard
An object is 12 cm in front of a concave mirror with a radius of curvature of 20 cm. Find the image distance di, positive for an image in front of the mirror (real) and negative for one behind it (virtual).
do = 12 cmR = 20 cm
di = cm
3Solutions
1.Kinematics
Answer: d = 216 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·18/3 = 12 s
Distance
d = v·t = 18·12 = 216 m
Answer
d = 216 m
At that moment the police car moves at 2v = 36 m/s.
2.Kinematics
Answer: hmax = 208.3 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 38·1.5 = 57 m/s
h₁ = ½·38·1.5² = 42.75 m
Free flight up
At the top the velocity is zero.
Δh = v₁²/(2g) = 57²/(2·9.81) = 165.6 m
hmax = 42.75 + 165.6 = 208.3 m
Answer
hmax = 208.3 m
3.Newton’s laws
Answer: a = 4.803 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 18·cos 65° = 7.607 m/s
t = x/vx = 18/7.607 = 2.366 s
Height at that time
y = 16.31·2.366 − ½·9.81·2.366² = 11.14 m
Answer
y = 11.14 m
The ball is already on its way down at the wall.
6.Projectile motion
Answer: x = 31.08 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 12·cos 40° = 9.193 m/s
vy = v0·sin θ = 12·sin 40° = 7.713 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 30 + 7.713·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (7.713 + √(59.5 + 588.6))/9.81 = 3.381 s
Horizontal distance
x = vx·t = 9.193·3.381 = 31.08 m
Answer
x = 31.08 m
7.Work & energy
Answer: P = 53.15 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 1800·9.81 = 17658 N
mg·sin θ = 17658·sin 8° = 2458 N
F = 2458 + 200 = 2658 N
Power
v = 72/3.6 = 20 m/s
P = F·v = 2658·20 = 53150 W = 53.15 kW
Answer
P = 53.15 kW
8.Work & energy
Answer: x = 20.78 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 24.53·(2.5 − 0.2·1.5) = 53.96 J
Maximum compression
½kx² = 53.96 → x = √(2·53.96/2500) = 0.2078 m = 20.78 cm
Answer
x = 20.78 cm
9.Momentum & collisions
Answer: v′1 = 1.909 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (3.5 − 2)/(3.5 + 2)·7 = 1.909 m/s
v′2 = 2·3.5/(3.5 + 2)·7 = 8.909 m/s
Answer
v′1 = 1.909 m/s
10.Momentum & collisions
Answer: Favg = 2400 N
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.3·(18 + 22) = 12 N·s
Average force
Favg = J/Δt = 12/0.005 = 2400 N
Answer
Favg = 2400 N
11.Hydrostatic force
Answer: F = 69.9 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 4 + 1.5/2 = 4.75 m
A = H·b = 1.5·1 = 1.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.75·1.5 = 69.9 kN
Answer
F = 69.9 kN
12.Hydrostatic force
Answer: ycp = 2.939 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2.5/2 = 2.75 m
A = H·b = 2.5·2 = 5 m²
Resultant force
F = ρ·g·yc·A = 1260·9.81·2.75·5 = 170 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(100/200)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
p1 − p2 = ½ρv2²(1 − β⁴)
v2 = √(2·19000/(1000·(1 − 0.0625))) = 6.367 m/s
v1 = 1.592 m/s
Flow rate
Q = A2·v2 = 0.007854·6.367 = 0.05 m³/s = 50 L/s
Answer
Q = 50 L/s
14.Continuity & Bernoulli
Answer: Q = 37.72 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Pressure difference from the manometer
Δp = (13600 − 1000)·9.81·0.3 = 37082 Pa
Throat velocity
Continuity and Bernoulli together give the ideal throat velocity.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 313.1 K, T2 = 333.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 2·(250/600)·(333.1/313.1) = 0.8866 L
Answer
V2 = 0.8866 L
17.Heat engines & refrigerators
Answer: ηII = 60.27 %
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 600 + 273.15 = 873.1 K
TL = 35 + 273.15 = 308.1 K
Carnot efficiency
ηCarnot = 1 − 308.1/873.1 = 64.71 %
Second-law efficiency
ηII = η/ηCarnot = 39/64.71 = 60.27 %
Answer
ηII = 60.27 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.3146 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 3.5/11.13 = 0.3146 kW
Answer
Ẇmin = 0.3146 kW
19.Waves, sound & optics
Answer: di = −4.286 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/(−5) − 1/30
di = −4.286 cm
Ray diagram
virtual, on the same side as the object
Answer
di = −4.286 cm
20.Waves, sound & optics
Answer: di = 60 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.