Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)6.667 s30

A car driving at 108 km/h brakes with a constant deceleration of 4.5 m/s² until it stops. Find the braking distance s.

v₀ = 108 km/ha = −4.5 m/s²v = 0
s = m
2.KinematicsHard
v₀ = 10 m/s30 m

A ball is thrown straight up at 10 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 10 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 30°a = ?m = 11 kg

An 11 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 11 kgθ = 30°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 10 kg4.5 kgno friction

A 10 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4.5 kg mass. The table is frictionless. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 10 kgm2 = 4.5 kgμ = 0g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 30 m/sθ = ?R = 80 m

A ball is launched from level ground at 30 m/s and must land 80 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 30 m/sR = 80 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 5 mv0​ = 11 m/s35°α = ?

A ball is launched at 11 m/s and 35° above the horizontal from the top of a 5 m cliff. Ignore air resistance and use g = 9.81 m/s². At what angle α below the horizontal does it hit the ground?

v₀ = 11 m/sθ = 35°h = 5 mg = 9.81 m/s²
α = °
7.Work & energyMedium
0.05 kgk = 1000 N/mh = ?

A toy launcher has a vertical spring of stiffness 1000 N/m. A 0.05 kg ball is placed on it and the spring is compressed by 8 cm, then released. Ignoring air resistance and the spring’s mass, find the height h the ball rises, measured from its position when the spring was compressed.

m = 0.05 kgk = 1000 N/mx = 8 cmg = 9.81 m/s²
h = m
8.Work & energyHard
h = 4 mL = 4.5 mμ = 0.1k = 5000 N/m

A 4 kg block is released from rest at height 4 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.1) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 4 kgh = 4 mL = 4.5 mμ = 0.1k = 5000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
800 kg10 m/s2000 kg

An 800 kg car moving at 10 m/s runs into a stationary 2000 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 800 kgv1 = 10 m/sm2 = 2000 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
18 m/s6 m/s

A 0.4 kg ball hits a wall at 18 m/s and bounces straight back at 6 m/s. The contact lasts 40 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.4 kgvin = 18 m/svout = 6 m/sΔt = 40 ms
J = N·s
11.Hydrostatic forceMedium
gated = 2.5 mH = 2 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 2.5 mH = 2 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 4 mH = 3 m

A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 4 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 4 mH = 3 mb = 1.5 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 200 mm, p1​ = 210 kPad2​ = 75 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 200 mm to 75 mm. In the wide section the pressure is 210 kPa and the velocity is 0.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 200 mmd2 = 75 mmp1 = 210 kPav1 = 0.75 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
d1​ = 100 mmd2​ = 60 mm12Δh = 310 mmmercuryQ = ?

A horizontal venturi meter (inlet 100 mm, throat 60 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 310 mm. The discharge coefficient is 0.98. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².

d1 = 100 mmd2 = 60 mmΔh = 310 mmCd = 0.98ρHg = 13 600 kg/m³g = 9.81 m/s²
Q = L/s
15.Ideal gas lawMedium
450 g of O₂P = 800 kPaT = 30 °CV = ?

What volume V does 450 g of O₂ occupy at 800 kPa and 30 °C? Treat it as an ideal gas.

m = 450 gM = 32 g/molP = 800 kPaT = 30 °CR = 8.314 J/(mol·K)
V = L
16.Ideal gas lawHard
N₂, M = 28.01 g/molP = 150 kPaT = 70 °Cρ = ?

Find the density ρ of N₂ at 150 kPa and 70 °C, treating it as an ideal gas.

M = 28.01 g/molP = 150 kPaT = 70 °CR = 8.314 J/(mol·K)
ρ = kg/m³
17.Heat engines & refrigeratorsMedium
TH​ = 475 °CTL​ = 25 °CEQH​ = 4600 kJQL​W = ?

A heat engine works between a hot reservoir at 475 °C and a cold reservoir at 25 °C. It takes in 4600 kJ of heat. Find the most work Wmax it could possibly produce.

TH = 475 °CTL = 25 °CQH = 4600 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
TH​ = 32 °CTL​ = -25 °CRQ̇H​Q̇L​ = 1 kWẆ = ?

A refrigerator keeps its cold space at -25 °C in a kitchen at 32 °C, removing heat from the cold space at 1 kW. Find the minimum power input Ẇmin.

TH = 32 °CTL = -25 °CQ̇L = 1 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
38°90°n1​ = ?glycerol, n2​ = 1.47

Light inside a transparent block is totally reflected at the boundary with glycerol (n = 1.47) for every angle of incidence above 38°. Find the refractive index n1 of the block.

θc = 38°n2 = 1.47
n1 =
20.Waves, sound & opticsHard
SO25 m/sf = 30 kHz

A sensor at rest sends ultrasound of 30 kHz towards a car that approaches at 25 m/s and mixes the echo with the emitted signal. Find the beat frequency fb (speed of sound 343 m/s).

f = 30 kHzu = 25 m/sv = 343 m/s
fb = Hz

3Solutions

1.Kinematics

Answer: s = 100 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 108/3.6 = 30 m/s

Braking distance

0 = v₀² − 2·a·s → s = v₀²/(2a) = 30²/(2·4.5) = 100 m

Answer

s = 100 m
2.Kinematics

Answer: t = 3.694 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 10·t − ½·9.81·t²
4.905·t² − 10·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (10 + √(10² + 2·9.81·30))/9.81 = 3.694 s

Answer

t = 3.694 s
3.Newton’s laws

Answer: a = 3.206 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.2·cos 30°) = 9.81·(0.5 − 0.1732) = 3.206 m/s²

Answer

a = 3.206 m/s²
4.Newton’s laws

Answer: a = 3.044 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (44.15 − 0)/14.5 = 3.044 m/s²

Answer

a = 3.044 m/s²
5.Projectile motion

Answer: θ = 30.35 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·80/30² = 0.872

Angle

2θ = 60.69° → θ = 30.35°

Answer

θ = 30.35°

The other solution is 90° − θ = 59.65°.

6.Projectile motion

Answer: α = 52.5 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 11·cos 35° = 9.011 m/s
vy0 = 11·sin 35° = 6.309 m/s

Vertical speed at impact

Energy or v² = v₀² + 2as in the vertical direction.

vy = √(6.309² + 2·9.81·5) = 11.74 m/s

Impact angle

tan α = vy/vx = 11.74/9.011 → α = 52.5°

Answer

α = 52.5°
7.Work & energy

Answer: h = 6.524 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 8 cm = 0.08 m
½kx² = ½·1000·0.08² = 3.2 J

Height

m·g = 0.05·9.81 = 0.4905 N
h = ½kx²/(mg) = 3.2/0.4905 = 6.524 m

Answer

h = 6.524 m
8.Work & energy

Answer: x = 23.61 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 39.24·(4 − 0.1·4.5) = 139.3 J

Maximum compression

½kx² = 139.3 → x = √(2·139.3/5000) = 0.2361 m = 23.61 cm

Answer

x = 23.61 cm
9.Momentum & collisions

Answer: ΔK = 28571 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 800·10/2800 = 2.857 m/s

Kinetic energy before and after

Kbefore = ½·800·10² = 40000 J
Kafter = ½·2800·2.857² = 11429 J

Energy lost

ΔK = 40000 − 11429 = 28571 J

Answer

ΔK = 28571 J

The lost energy goes into deformation, heat and sound.

10.Momentum & collisions

Answer: J = 9.6 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.4·(6 + 18) = 9.6 N·s

Answer

J = 9.6 N·s
11.Hydrostatic force

Answer: F = 68.67 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 2.5 + 2/2 = 3.5 m
A = H·b = 2·1 = 2 m²
gated = 2.5 mH = 2 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·3.5·2 = 68.67 kN

Answer

F = 68.67 kN
12.Hydrostatic force

Answer: F = 213.7 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 4 + 3/2 = 5.5 m
A = H·b = 3·1.5 = 4.5 m²
gated = 4 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·5.5·4.5 = 213.7 kN

Answer

F = 213.7 kN
13.Continuity & Bernoulli

Answer: p2 = 196.1 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.75·(200/75)² = 5.333 m/s
½ρ(v1² − v2²) = ½·1000·(0.75² − 5.333²)/1000 = −13.94 kPa
p2 = p1 + ½ρ(v1² − v2²) = 210 + (−13.94) = 196.1 kPa

Answer

p2 = 196.1 kPa
14.Continuity & Bernoulli

Answer: Q = 26 L/s

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Pressure difference from the manometer

Δp = (13600 − 1000)·9.81·0.31 = 38318 Pa

Throat velocity

Continuity and Bernoulli together give the ideal throat velocity.

β = 60/100 = 0.6
v2 = √(2·38318/(1000·(1 − 0.1296))) = 9.383 m/s

Actual flow rate

Q = Cd·A2·v2 = 0.98·0.002827·9.383 = 0.026 m³/s = 26 L/s

Answer

Q = 26 L/s
15.Ideal gas law

Answer: V = 44.3 L

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = 450/32 = 14.06 mol
T = 30 + 273.15 = 303.1 K

Volume

V = nRT/P = 14.06·8.314·303.1/800 = 44.3 L

Answer

V = 44.3 L
16.Ideal gas law

Answer: ρ = 1.473 kg/m³

Ideal gas density: ρ = PM/(RT).

Rearrange the gas law

PV = (m/M)RT → ρ = m/V = PM/(RT)
T = 70 + 273.15 = 343.1 K

Density

ρ = 150·28.01/(8.314·343.1) = 1.473 kg/m³

Answer

ρ = 1.473 kg/m³
17.Heat engines & refrigerators

Answer: Wmax = 2767 kJ

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 475 + 273.15 = 748.1 K
TL = 25 + 273.15 = 298.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 298.1/748.1 = 60.15 %

Maximum work

Wmax = ηmax·QH = 0.6015·4600 = 2767 kJ

Answer

Wmax = 2767 kJ
18.Heat engines & refrigerators

Answer: Ẇmin = 0.2297 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 32 + 273.15 = 305.1 K
TL = -25 + 273.15 = 248.1 K

Best possible COP

COPR,max = TL/(TH − TL) = 248.1/(305.1 − 248.1) = 4.354

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇L/COP = 1/4.354 = 0.2297 kW

Answer

Ẇmin = 0.2297 kW
19.Waves, sound & optics

Answer: n1 = 2.388

Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.

Refractive index of the block

n₁ = n₂/sin θc = 1.47/0.6157 = 2.388

Answer

n1 = 2.388
20.Waves, sound & optics

Answer: fb = 4717 Hz

Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.

Frequency at the car

f′ = 30000·(343 + 25)/343 = 32187 Hz

Frequency of the echo

f″ = f′·343/(343 − 25) = 34717 Hz

Beat frequency

fb = |f″ − f| = 4717 Hz

Answer

fb = 4717 Hz

ExamProblems · examproblems.com/courses/physics-for-engineers