Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
t (s)v (m/s)t = ?15

A car driving at 54 km/h brakes with a constant deceleration of 7 m/s² until it stops. How long does braking take? Find t.

v₀ = 54 km/ha = −7 m/s²v = 0
t = s
2.KinematicsHard
a = 30 m/s²

A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 30 m/s² for 2 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.

a = 30 m/s²t1 = 2 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 40°45 kgF = ?

A 45 kg box is pushed up a ramp at 40° to the horizontal at constant speed, by a force parallel to the ramp. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the pushing force F.

m = 45 kgθ = 40°μ = 0.2g = 9.81 m/s²
F = N
4.Newton’s lawsHard
m1​ = 6.5 kg3.5 kgμ = 0.25

A 6.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 3.5 kg mass. The coefficient of kinetic friction between block and table is 0.25. Use g = 9.81 m/s². Find the tension T in the string.

m1 = 6.5 kgm2 = 3.5 kgμ = 0.25g = 9.81 m/s²
T = N
5.Projectile motionMedium
15 my = ?v0​ = 16 m/s40°

A ball is kicked from level ground at 16 m/s and 40° above the horizontal towards a wall 15 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?

v₀ = 16 m/sθ = 40°x = 15 mg = 9.81 m/s²
y = m
6.Projectile motionHard
5 mv0​ = 29 m/s45°x = ?

A ball is thrown from ground level at 29 m/s and 45° above the horizontal. It lands on the flat roof of a building 5 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 29 m/sθ = 45°hroof = 5 mg = 9.81 m/s²
x = m
7.Work & energyMedium
25°d = 14 mμ = 0.3

A block slides from rest down a slope at 25° to the horizontal. The coefficient of kinetic friction is 0.3. Find its speed v after it has slid 14 m along the slope.

θ = 25°μ = 0.3d = 14 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
k = 2000 N/m25°μ = 0.150.5 kg

A spring of stiffness 2000 N/m at the bottom of a 25° slope is compressed by 20 cm against a 0.5 kg block and released. The coefficient of kinetic friction between block and slope is 0.15. How far d up the slope does the block travel from the release point before it stops? (Ignore the short distance over which the spring pushes, i.e. take friction and gravity over the whole distance d.)

m = 0.5 kgk = 2000 N/mx = 20 cmθ = 25°μ = 0.15g = 9.81 m/s²
d = m
9.Momentum & collisionsMedium
2 kg9 m/s3.5 kg

A 2 kg glider moving at 9 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).

m1 = 2 kgm2 = 3.5 kgv1 = 9 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
12 m/s19 m/s

A 0.6 kg ball hits a wall at 12 m/s and bounces straight back at 19 m/s. The contact lasts 20 ms. Find the magnitude of the impulse J the wall gives the ball.

m = 0.6 kgvin = 12 m/svout = 19 m/sΔt = 20 ms
J = N·s
11.Hydrostatic forceMedium
gated = 1.5 mH = 1 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1.5 mH = 1 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 0.5 mH = 3 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 0.5 mH = 3 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 100 mm, p1​ = 380 kPad2​ = 75 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 100 mm to 75 mm. In the wide section the pressure is 380 kPa and the velocity is 1.75 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 100 mmd2 = 75 mmp1 = 380 kPav1 = 1.75 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
12d1​ = 200 mm, p1​ = 250 kPad2​ = 75 mm, p2​ = ?Δz = 1 m

Water flows up through a pipe that narrows from 200 mm to 75 mm while rising 1 m. At section 1 the pressure is 250 kPa and the velocity is 1.75 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 200 mmd2 = 75 mmp1 = 250 kPav1 = 1.75 m/sΔz = 1 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
160 g of O₂V = 50 LT = 80 °CP = ?

A tank of 50 L contains 160 g of O₂ at 80 °C. Treat it as an ideal gas and find the pressure P.

m = 160 gM = 32 g/molV = 50 LT = 80 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of CO₂ goes from 400 kPa, 5 L, 40 °C to 800 kPa and 230 °C. Find the new volume V2.

P1 = 400 kPaV1 = 5 LT1 = 40 °CP2 = 800 kPaT2 = 230 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 575 °CTL​ = 40 °CEQH​QL​W

A heat engine works between a hot reservoir at 575 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.

TH = 575 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
TH​ = 650 °CTL​ = 25 °CEQH​ = 4800 kJQL​ = 2832 kJW = 1968 kJ

A heat engine takes in 4800 kJ of heat from a reservoir at 650 °C, produces 1968 kJ of work and rejects the rest to a reservoir at 25 °C, per cycle. Find the total entropy generated Sgen per cycle.

TH = 650 °CTL = 25 °CQH = 4800 kJW = 1968 kJ
Sgen = kJ/K
19.Waves, sound & opticsMedium
P4 × 85 dB

One machine gives a sound level of 85 dB at a certain point. Find the level β at that point when 4 identical machines run at the same time (incoherent sources).

β1 = 85 dBn = 4
β = dB
20.Waves, sound & opticsHard
λ = 650 nmd = 0.3 mmL = 1.5 m

Light of wavelength 650 nm falls on two slits 0.3 mm apart. The screen is 1.5 m away. Find the spacing Δy between neighbouring bright fringes.

λ = 650 nmd = 0.3 mmL = 1.5 m
Δy = mm

3Solutions

1.Kinematics

Answer: t = 2.143 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v₀ = 54/3.6 = 15 m/s

Braking time

0 = v₀ − a·t → t = v₀/a = 15/7 = 2.143 s

Answer

t = 2.143 s
2.Kinematics

Answer: t = 15.16 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Powered phase

v₁ = 30·2 = 60 m/s
h₁ = ½·30·2² = 60 m

Free flight to the ground

Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.

t₂ = (60 + √(60² + 2·9.81·60))/9.81 = 13.16 s
t = 2 + 13.16 = 15.16 s

Answer

t = 15.16 s
3.Newton’s laws

Answer: F = 351.4 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Constant speed: the forces balance.

F = m·g·sin θ + μ·m·g·cos θ

Pushing force

F = 283.8 + 67.63 = 351.4 N

Answer

F = 351.4 N
4.Newton’s laws

Answer: T = 27.9 N

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (34.34 − 15.94)/10 = 1.839 m/s²

Tension from the block on the table

T − μ·m1·g = m1·a
T = 6.5·1.839 + 15.94 = 27.9 N

Answer

T = 27.9 N
5.Projectile motion

Answer: y = 5.24 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Time to the wall

vx = 16·cos 40° = 12.26 m/s
t = x/vx = 15/12.26 = 1.224 s

Height at that time

y = 10.28·1.224 − ½·9.81·1.224² = 5.24 m

Answer

y = 5.24 m

The ball is already on its way down at the wall.

6.Projectile motion

Answer: x = 80.4 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 20.51 m/s, vy = 20.51 m/s

Time to land on the roof

Larger root: the ball is descending.

5 = 20.51·t − 4.905·t²
t = (20.51 + √(20.51² − 2·9.81·5))/9.81 = 3.921 s

Horizontal distance

x = vx·t = 20.51·3.921 = 80.4 m

Answer

x = 80.4 m
7.Work & energy

Answer: v = 6.434 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy balance along the slope

The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.

½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·14·(0.4226 − 0.3·0.9063)) = 6.434 m/s

Answer

v = 6.434 m/s
8.Work & energy

Answer: d = 14.6 m

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Spring energy

x = 20 cm = 0.2 m
½kx² = ½·2000·0.2² = 40 J

Energy balance along the slope

m·g = 0.5·9.81 = 4.905 N
½kx² = mg·d·(sin θ + μ·cos θ)
d = 40/(4.905·(0.4226 + 0.15·0.9063)) = 14.6 m

Answer

d = 14.6 m
9.Momentum & collisions

Answer: v′1 = −2.455 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Elastic collision with a target at rest

Solving momentum and energy conservation together gives these two results.

v′1 = (2 − 3.5)/(2 + 3.5)·9 = −2.455 m/s
v′2 = 2·2/(2 + 3.5)·9 = 6.545 m/s

Answer

v′1 = −2.455 m/s

The minus sign means the first glider bounces back.

10.Momentum & collisions

Answer: J = 18.6 N·s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.6·(19 + 12) = 18.6 N·s

Answer

J = 18.6 N·s
11.Hydrostatic force

Answer: F = 58.86 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1.5 + 1/2 = 2 m
A = H·b = 1·3 = 3 m²
gated = 1.5 mH = 1 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2·3 = 58.86 kN

Answer

F = 58.86 kN
12.Hydrostatic force

Answer: F = 176.6 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 0.5 + 3/2 = 2 m
A = H·b = 3·3 = 9 m²
gated = 0.5 mH = 3 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2·9 = 176.6 kN

Answer

F = 176.6 kN
13.Continuity & Bernoulli

Answer: p2 = 376.7 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 1.75·(100/75)² = 3.111 m/s
½ρ(v1² − v2²) = ½·1000·(1.75² − 3.111²)/1000 = −3.308 kPa
p2 = p1 + ½ρ(v1² − v2²) = 380 + (−3.308) = 376.7 kPa

Answer

p2 = 376.7 kPa
14.Continuity & Bernoulli

Answer: p2 = 164.3 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 1.75·(200/75)² = 12.44 m/s
½ρ(v1² − v2²) = ½·1000·(1.75² − 12.44²)/1000 = −75.9 kPa
ρgΔz = 1000·9.81·1/1000 = 9.81 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 250 + (−75.9) − 9.81 = 164.3 kPa

Answer

p2 = 164.3 kPa
15.Ideal gas law

Answer: P = 293.6 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 160/32 = 5 mol
T = 80 + 273.15 = 353.1 K

Pressure

P = nRT/V = 5·8.314·353.1/0.05 = 293.6 kPa

Answer

P = 293.6 kPa
16.Ideal gas law

Answer: V2 = 4.017 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 313.1 K, T2 = 503.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 5·(400/800)·(503.1/313.1) = 4.017 L

Answer

V2 = 4.017 L
17.Heat engines & refrigerators

Answer: ηmax = 63.08 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 575 + 273.15 = 848.1 K
TL = 40 + 273.15 = 313.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 313.1/848.1 = 63.08 %

Answer

ηmax = 63.08 %
18.Heat engines & refrigerators

Answer: Sgen = 4.299 kJ/K

Entropy generation: over a full cycle the working fluid has no net entropy change. The hot reservoir loses QH/TH and the cold reservoir gains QL/TL. Their sum is the entropy generated, which is zero for a reversible cycle and positive for every real one.

Heat rejected

QL = QH − W = 4800 − 1968 = 2832 kJ

Absolute temperatures

TH = 650 + 273.15 = 923.1 K
TL = 25 + 273.15 = 298.1 K

Entropy changes of the reservoirs

ΔSH = −4800/923.1 = −5.2 kJ/K
ΔSL = 2832/298.1 = 9.499 kJ/K
Sgen = 9.499 − 5.2 = 4.299 kJ/K

Answer

Sgen = 4.299 kJ/K

Sgen > 0, so the engine is possible but irreversible.

19.Waves, sound & optics

Answer: β = 91.02 dB

Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).

Total intensity

I = 4·I₁

Level

β = 85 + 10·log₁₀(4) = 91.02 dB

Answer

β = 91.02 dB
20.Waves, sound & optics

Answer: Δy = 3.25 mm

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Fringe spacing

Δy = λL/d = 650 × 10⁻⁹·1.5/(0.3 × 10⁻³) = 3.25 mm

Answer

Δy = 3.25 mm

ExamProblems · examproblems.com/courses/physics-for-engineers