Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A driver moving at 36 km/h sees an obstacle. Her reaction time is 1.1 s, after which the car brakes with a constant deceleration of 6.5 m/s². Find the total stopping distance d from the moment she sees the obstacle.
v₀ = 36 km/htr = 1.1 sa = −6.5 m/s²
d = m
2.KinematicsHard
A model rocket is launched straight up from rest. Its engine gives it a constant upward acceleration of 34 m/s² for 2.5 s, after which the engine stops and the rocket moves freely. Ignore air resistance and use g = 9.81 m/s². How long after launch does it hit the ground? Find t.
a = 34 m/s²t1 = 2.5 sg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
An 8 kg block slides down a slope at 20° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 8 kgθ = 20°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 2.5 kg block on a ramp at 40° is connected by a light string over a frictionless pulley at the top of the ramp to a hanging 8.5 kg mass. The hanging mass moves down. The coefficient of kinetic friction between block and ramp is 0.25. Use g = 9.81 m/s². Find the acceleration a of the system.
A ball is launched at 20° above horizontal from level ground. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 20 m/sθ = 20°g = 9.81 m/s²
x = m
6.Projectile motionHard
A ball is launched at 55° above horizontal from the top of a 30 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 23 m/sθ = 55°h = 30 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 2000 kg car drives up a 4° slope at a constant 36 km/h. Air resistance and rolling resistance together amount to 750 N. Find the power P the wheels must deliver, in kW.
A 20 kg block starts from rest at the bottom of a 15° slope and is pulled up the slope by a constant force of 200 N parallel to the slope. The coefficient of kinetic friction is 0.25. Find the speed v of the block after it has moved 7 m up the slope.
A 4 kg projectile moving horizontally at 24 m/s explodes into two fragments that move along the same line. The 1 kg fragment continues forwards at 53 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).
M = 4 kgu = 24 m/sm1 = 1 kgv′1 = 53 m/sm2 = 3 kg
v′2 = m/s
10.Momentum & collisionsHard
A 0.6 kg ball hits a wall at 9 m/s and bounces straight back at 7 m/s. The contact lasts 5 ms. Find the magnitude of the impulse J the wall gives the ball.
m = 0.6 kgvin = 9 m/svout = 7 m/sΔt = 5 ms
J = N·s
11.Hydrostatic forceMedium
A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 2.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 4 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 4 mH = 3 mb = 1.5 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water flows through a horizontal venturi meter with an inlet diameter of 100 mm and a throat diameter of 50 mm. The pressure at the inlet is 56 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
A horizontal venturi meter (inlet 150 mm, throat 100 mm) carries water. A mercury U-tube manometer connected between the inlet and the throat shows a level difference of 90 mm. The discharge coefficient is 0.96. Find the flow rate Q. Use ρ = 1000 kg/m³ for water, 13 600 kg/m³ for mercury and g = 9.81 m/s².
A heat engine works between a hot reservoir at 425 °C and a cold reservoir at 30 °C. Find the highest possible thermal efficiency ηmax.
TH = 425 °CTL = 30 °C
ηmax = %
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 5 °C in a kitchen at 35 °C, removing heat from the cold space at 5 kW. Find the minimum power input Ẇmin.
TH = 35 °CTL = 5 °CQ̇L = 5 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An object 1 cm tall stands 50 cm in front of a thin converging lens with a focal length of 20 cm. Find the image height hi (negative for an inverted image).
ho = 1 cmdo = 50 cmf = 20 cm
hi = cm
20.Waves, sound & opticsHard
An object is 30 cm in front of a concave mirror with a radius of curvature of 20 cm. Find the image distance di, positive for an image in front of the mirror (real) and negative for one behind it (virtual).
do = 30 cmR = 20 cm
di = cm
3Solutions
1.Kinematics
Answer: d = 18.69 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 36/3.6 = 10 m/s
Reaction distance
d1 = v₀·tr = 10·1.1 = 11 m
Braking distance
d2 = v₀²/(2a) = 10²/(2·6.5) = 7.692 m
Total
d = 11 + 7.692 = 18.69 m
Answer
d = 18.69 m
2.Kinematics
Answer: t = 21 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Powered phase
v₁ = 34·2.5 = 85 m/s
h₁ = ½·34·2.5² = 106.3 m
Free flight to the ground
Solve −h₁ = v₁·t₂ − ½·g·t₂² for the positive root.
t₂ = (85 + √(85² + 2·9.81·106.3))/9.81 = 18.5 s
t = 2.5 + 18.5 = 21 s
Answer
t = 21 s
3.Newton’s laws
Answer: a = 0.5897 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Forces along the string
m₂·g = 83.39 N
m₁·g·sin θ = 15.76 N
μ·m₁·g·cos θ = 4.697 N
Acceleration of the system
a = (83.39 − 15.76 − 4.697)/11 = 5.72 m/s²
Answer
a = 5.72 m/s²
5.Projectile motion
Answer: x = 26.21 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 20·cos 20° = 18.79 m/s
vy = v0·sin θ = 20·sin 20° = 6.84 m/s
Time in the air
Starting and landing at the same height: t = 2vy/g.
t = 2·6.84/9.81 = 1.395 s
Horizontal distance
x = vx·t = 18.79·1.395 = 26.21 m
Answer
x = 26.21 m
6.Projectile motion
Answer: x = 66.64 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 23·cos 55° = 13.19 m/s
vy = v0·sin θ = 23·sin 55° = 18.84 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 30 + 18.84·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (18.84 + √(355 + 588.6))/9.81 = 5.052 s
Horizontal distance
x = vx·t = 13.19·5.052 = 66.64 m
Answer
x = 66.64 m
7.Work & energy
Answer: P = 21.19 kW
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). Power is force times speed: P = F·v.
Driving force
m·g = 2000·9.81 = 19620 N
mg·sin θ = 19620·sin 4° = 1369 N
F = 1369 + 750 = 2119 N
Power
v = 36/3.6 = 10 m/s
P = F·v = 2119·10 = 21186 W = 21.19 kW
Answer
P = 21.19 kW
8.Work & energy
Answer: v = 8.443 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 20·9.81 = 196.2 N
mg·sin θ = 50.78 N
μ·mg·cos θ = 47.38 N
Work–energy
½mv² = (200 − 98.16)·7 = 712.9 J
v = √(2·712.9/20) = 8.443 m/s
Answer
v = 8.443 m/s
9.Momentum & collisions
Answer: v′2 = 14.33 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum before
p = M·u = 4·24 = 96 kg·m/s
Momentum after
96 = 1·53 + 3·v′2
v′2 = (96 − 53)/3 = 14.33 m/s
Answer
v′2 = 14.33 m/s
10.Momentum & collisions
Answer: J = 9.6 N·s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Change in momentum
J = m·Δv = 0.6·(7 + 9) = 9.6 N·s
Answer
J = 9.6 N·s
11.Hydrostatic force
Answer: F = 88.29 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 2.5 + 1/2 = 3 m
A = H·b = 1·3 = 3 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·3·3 = 88.29 kN
Answer
F = 88.29 kN
12.Hydrostatic force
Answer: ycp = 5.636 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 4 + 3/2 = 5.5 m
A = H·b = 3·1.5 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·5.5·4.5 = 213.7 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(50/100)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Pressure difference from the manometer
Δp = (13600 − 1000)·9.81·0.09 = 11125 Pa
Throat velocity
Continuity and Bernoulli together give the ideal throat velocity.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 425 + 273.15 = 698.1 K
TL = 30 + 273.15 = 303.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 303.1/698.1 = 56.58 %
Answer
ηmax = 56.58 %
18.Heat engines & refrigerators
Answer: Ẇmin = 0.5393 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 5/9.272 = 0.5393 kW
Answer
Ẇmin = 0.5393 kW
19.Waves, sound & optics
Answer: hi = −0.6667 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/20 − 1/50
di = 33.33 cm
Magnification and height
m = −33.33/50 = −0.6667
hi = −0.6667·1 = −0.6667 cm
Answer
hi = −0.6667 cm
20.Waves, sound & optics
Answer: di = 15 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.