Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
policea = 3.5 m/s²car28 m/s

A car speeding at a constant 28 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How far from its starting point does the police car catch up? Find d.

vcar = 28 m/sapolice = 3.5 m/s²v0,police = 0
d = m
2.KinematicsHard
v₀ = 11 m/s30 m

A ball is thrown straight up at 11 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². Find the greatest height hmax above the ground.

v₀ = 11 m/sh₀ = 30 mg = 9.81 m/s²
hmax = m
3.Newton’s lawsMedium
θ = 30°a = ?m = 8 kg

An 8 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.2. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 30°μ = 0.2g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 5 kg5.5 kgμ = 0.2

A 5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5.5 kg mass. The coefficient of kinetic friction between block and table is 0.2. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 5 kgm2 = 5.5 kgμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = 36 m/sθ = ?R = 65 m

A ball is launched from level ground at 36 m/s and must land 65 m away. Ignore air resistance and use g = 9.81 m/s². Find the smaller of the two possible launch angles θ.

v₀ = 36 m/sR = 65 mg = 9.81 m/s²
θ = °
6.Projectile motionHard
h = 25 mv0​ = 17 m/s45°x = ?

A ball is launched at 45° above horizontal from the top of a 25 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 17 m/sθ = 45°h = 25 mg = 9.81 m/s²
x = m
7.Work & energyMedium
20°d = 9 mμ = 0.25

A 2.5 kg block slides 9 m down a slope at 20° to the horizontal, with a coefficient of kinetic friction of 0.25. Find the work Wf done against friction.

m = 2.5 kgθ = 20°μ = 0.25d = 9 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
h = 5 mL = 3.5 mμ = 0.25k = 2000 N/m

A 2 kg block is released from rest at height 5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 3.5 m long (μ = 0.25) and then runs onto a spring (k = 2000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2 kgh = 5 mL = 3.5 mμ = 0.25k = 2000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
1.5 kgv = ?8 gh = 13 cm

An 8 g bullet is fired horizontally into a 1.5 kg wooden block hanging on light strings, and stays inside it. The block swings up until it is 13 cm higher than at the start. Use g = 9.81 m/s². Find the speed v of the bullet before impact.

m = 8 gM = 1.5 kgh = 13 cmg = 9.81 m/s²
v = m/s
10.Momentum & collisionsHard
1200 kgv1​ = ?1500 kg

A 1200 kg car runs into a parked 1500 kg car. The wrecks lock together and skid 18 m before stopping. The coefficient of kinetic friction between tyres and road is 0.7. Use g = 9.81 m/s². Find the speed v1 of the first car just before the collision.

m1 = 1200 kgm2 = 1500 kgd = 18 mμ = 0.7g = 9.81 m/s²
v1 = m/s
11.Hydrostatic forceMedium
gated = 3 mH = 2 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 3 mH = 2 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 1 mH = 1 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of oil, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 1 mb = 2 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 200 mm, p1​ = ?d2​ = 150 mm, p2​ = 170 kPa

Water flows at 40 L/s through a horizontal pipe that narrows from 200 mm to 150 mm. The pressure in the narrow section is 170 kPa. Ignoring losses, find the pressure p1 in the wide section.

Q = 40 L/sd1 = 200 mmd2 = 150 mmp2 = 170 kPaρ = 1000 kg/m³
p1 = kPa
14.Continuity & BernoulliHard
H = ?d1​ = 50 mmp1​ = 90 kPad2​ = 20 mm

A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 50 mm and a gauge pressure of 90 kPa. The nozzle exit diameter is 20 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².

d1 = 50 mmp1 = 90 kPa (gauge)d2 = 20 mmρ = 1000 kg/m³g = 9.81 m/s²
H = m
15.Ideal gas lawMedium
500 g of N₂V = 10 LT = 100 °CP = ?

A tank of 10 L contains 500 g of N₂ at 100 °C. Treat it as an ideal gas and find the pressure P.

m = 500 gM = 28.01 g/molV = 10 LT = 100 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of He goes from 150 kPa, 10 L, 40 °C to 400 kPa and 170 °C. Find the new volume V2.

P1 = 150 kPaV1 = 10 LT1 = 40 °CP2 = 400 kPaT2 = 170 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 650 °CTL​ = ?EQH​ = 2100 kJQL​ = 678 kJW

A reversible (Carnot) heat engine takes in 2100 kJ of heat from a reservoir at 650 °C and rejects 678 kJ per cycle. Find the temperature TL of the cold reservoir in °C.

TH = 650 °CQH = 2100 kJQL = 678 kJ
TL = °C
18.Heat engines & refrigeratorsHard
700 °CTm​ = ?25 °CABWA​WB​

Two Carnot engines work in series. Engine A receives heat from a reservoir at 700 °C and rejects heat to an intermediate reservoir at temperature Tm. Engine B takes all that heat and rejects heat to a reservoir at 25 °C. Both engines have the same thermal efficiency. Find Tm in °C.

TH = 700 °CTL = 25 °C
Tm = °C
19.Waves, sound & opticsMedium
FF2 cmdo​ = 25 cmf = 10 cm

An object 2 cm tall stands 25 cm in front of a thin converging lens with a focal length of 10 cm. Find the image height hi (negative for an inverted image).

ho = 2 cmdo = 25 cmf = 10 cm
hi = cm
20.Waves, sound & opticsHard
λ = 589 nmθ2​ = ?

Light of wavelength 589 nm falls at right angles on a grating with 800 lines per millimetre. Find the angle θ2 of the order-2 maximum.

N = 800 mm⁻¹λ = 589 nmm = 2
θ2 = °

3Solutions

1.Kinematics

Answer: d = 448 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·28/3.5 = 16 s

Distance

d = v·t = 28·16 = 448 m

Answer

d = 448 m

At that moment the police car moves at 2v = 56 m/s.

2.Kinematics

Answer: hmax = 36.17 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Rise above the roof

0 = v₀² − 2·g·Δh → Δh = 11²/(2·9.81) = 6.167 m

Height above the ground

hmax = 30 + 6.167 = 36.17 m

Answer

hmax = 36.17 m
3.Newton’s laws

Answer: a = 3.206 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.2·cos 30°) = 9.81·(0.5 − 0.1732) = 3.206 m/s²

Answer

a = 3.206 m/s²
4.Newton’s laws

Answer: a = 4.204 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (53.96 − 9.81)/10.5 = 4.204 m/s²

Answer

a = 4.204 m/s²
5.Projectile motion

Answer: θ = 14.74 °

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Range formula

R = v₀²·sin 2θ/g → sin 2θ = 9.81·65/36² = 0.492

Angle

2θ = 29.47° → θ = 14.74°

Answer

θ = 14.74°

The other solution is 90° − θ = 75.26°.

6.Projectile motion

Answer: x = 45.61 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 17·cos 45° = 12.02 m/s
vy = v0·sin θ = 17·sin 45° = 12.02 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 25 + 12.02·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (12.02 + √(144.5 + 490.5))/9.81 = 3.794 s

Horizontal distance

x = vx·t = 12.02·3.794 = 45.61 m

Answer

x = 45.61 m
7.Work & energy

Answer: Wf = 51.85 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 24.53·0.9397 = 23.05 N
F = μN = 0.25·23.05 = 5.761 N

Work against friction

Wf = F·d = 5.761·9 = 51.85 J

Answer

Wf = 51.85 J
8.Work & energy

Answer: x = 28.45 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 19.62·(5 − 0.25·3.5) = 80.93 J

Maximum compression

½kx² = 80.93 → x = √(2·80.93/2000) = 0.2845 m = 28.45 cm

Answer

x = 28.45 cm
9.Momentum & collisions

Answer: v = 301 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Swing after impact

V = √(2·g·h) = √(2·9.81·0.13) = 1.597 m/s

Collision

m·v = (m + M)·V → v = (0.008 + 1.5)·1.597/0.008 = 301 m/s

Answer

v = 301 m/s
10.Momentum & collisions

Answer: v1 = 35.38 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Speed after the collision

V = √(2·μ·g·d) = √(2·0.7·9.81·18) = 15.72 m/s

Momentum in the collision

m1·v1 = (m1 + m2)·V → v1 = 2700·15.72/1200 = 35.38 m/s

Answer

v1 = 35.38 m/s
(127.4 km/h)
11.Hydrostatic force

Answer: F = 235.4 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 3 + 2/2 = 4 m
A = H·b = 2·3 = 6 m²
gated = 3 mH = 2 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·4·6 = 235.4 kN

Answer

F = 235.4 kN
12.Hydrostatic force

Answer: F = 25.9 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 1/2 = 1.5 m
A = H·b = 1·2 = 2 m²
gated = 1 mH = 1 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·1.5·2 = 25.9 kN

Answer

F = 25.9 kN
13.Continuity & Bernoulli

Answer: p1 = 171.8 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Velocities

v1 = Q/A1 = 0.04/0.03142 = 1.273 m/s
v2 = Q/A2 = 0.04/0.01767 = 2.264 m/s

Bernoulli

p1 = p2 + ½ρ(v2² − v1²) = 170 + ½·1000·(2.264² − 1.273²)/1000 = 170 + 1.751 = 171.8 kPa

Answer

p1 = 171.8 kPa
14.Continuity & Bernoulli

Answer: H = 9.415 m

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Exit velocity

β = 20/50 = 0.4
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·90000/(1000·0.9744)) = 13.59 m/s

Height of the jet

Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.

H = v2²/(2g) = 13.59²/(2·9.81) = 9.415 m

Answer

H = 9.415 m
15.Ideal gas law

Answer: P = 5538 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 500/28.01 = 17.85 mol
T = 100 + 273.15 = 373.1 K

Pressure

P = nRT/V = 17.85·8.314·373.1/0.01 = 5538 kPa

Answer

P = 5538 kPa
16.Ideal gas law

Answer: V2 = 5.307 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 313.1 K, T2 = 443.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 10·(150/400)·(443.1/313.1) = 5.307 L

Answer

V2 = 5.307 L
17.Heat engines & refrigerators

Answer: TL = 24.9 °C

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperature of the source

TH = 650 + 273.15 = 923.1 K

Reversible heat ratio

TL = TH·QL/QH = 923.1·678/2100 = 298 K = 24.9 °C

Answer

TL = 24.9 °C
18.Heat engines & refrigerators

Answer: Tm = 265.5 °C

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 700 + 273.15 = 973.1 K
TL = 25 + 273.15 = 298.1 K

Equal efficiencies

1 − Tm/TH = 1 − TL/Tm gives Tm² = TH·TL.

Tm = √(973.1·298.1) = 538.7 K = 265.5 °C

Answer

Tm = 265.5 °C
19.Waves, sound & optics

Answer: hi = −1.333 cm

Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.

Thin-lens equation

1/di = 1/f − 1/do = 1/10 − 1/25
di = 16.67 cm
FF25 cmf = 10 cm

Magnification and height

m = −16.67/25 = −0.6667
hi = −0.6667·2 = −1.333 cm

Answer

hi = −1.333 cm
20.Waves, sound & optics

Answer: θ2 = 70.46 °

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Line spacing

d = 1/800 mm = 1.25 × 10⁻⁶ m

Grating equation

sin θ = mλ/d = 2·589 × 10⁻⁹/(1.25 × 10⁻⁶) = 0.9424
θ = 70.46°

Answer

θ2 = 70.46°

ExamProblems · examproblems.com/courses/physics-for-engineers