Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car driving at 120 km/h brakes with a constant deceleration of 7.5 m/s² until it stops. How long does braking take? Find t.
v₀ = 120 km/ha = −7.5 m/s²v = 0
t = s
2.KinematicsHard
A ball is thrown straight up at 8 m/s from the edge of a roof 40 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 8 m/sh₀ = 40 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
Masses of 7 kg and 1 kg hang on either side of a light, frictionless pulley, connected by a light string. The system is released from rest. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 7 kgm2 = 1 kgg = 9.81 m/s²
T = N
4.Newton’s lawsHard
Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 20 N pulls the front 1 kg block; the 2 kg block is towed behind. The coefficient of kinetic friction is 0.3 for both blocks. Use g = 9.81 m/s². Find the tension T in the connecting string.
m1 = 2 kgm2 = 1 kgF = 20 Nμ = 0.3g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is kicked from level ground at 26 m/s and 25° above the horizontal towards a wall 21 m away. Ignore air resistance and use g = 9.81 m/s². At what height y does the ball pass the wall?
v₀ = 26 m/sθ = 25°x = 21 mg = 9.81 m/s²
y = m
6.Projectile motionHard
A ball is launched at 45° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.
v0 = 13 m/sθ = 45°h = 20 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A block slides from rest down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.2. Find its speed v after it has slid 10 m along the slope.
θ = 45°μ = 0.2d = 10 mg = 9.81 m/s²
v = m/s
8.Work & energyHard
A 15 kg block starts from rest at the bottom of a 30° slope and is pulled up the slope by a constant force of 150 N parallel to the slope. The coefficient of kinetic friction is 0.15. Find the speed v of the block after it has moved 6 m up the slope.
A 1 kg glider moving at 4 m/s makes a perfectly elastic head-on collision with a 3.5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 1 kgm2 = 3.5 kgv1 = 4 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
A 20 g bullet is fired horizontally into a 1 kg block hanging from light strings 1.2 m long, and stays in it. The strings swing out to a largest angle of 20° from the vertical. Use g = 9.81 m/s². Find the speed v of the bullet before impact.
m = 20 gM = 1 kgL = 1.2 mθ = 20°g = 9.81 m/s²
v = m/s
11.Hydrostatic forceMedium
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.
Water flows through a horizontal venturi meter with an inlet diameter of 300 mm and a throat diameter of 150 mm. The pressure at the inlet is 47 kPa higher than at the throat. Ignoring losses, find the flow rate Q.
Water flows up through a pipe that narrows from 100 mm to 75 mm while rising 2 m. At section 1 the pressure is 320 kPa and the velocity is 2.5 m/s. Ignoring losses, find the pressure p2 at section 2.
A heat engine works between a hot reservoir at 475 °C and a cold reservoir at 25 °C. It takes in 2400 kJ of heat. Find the most work Wmax it could possibly produce.
TH = 475 °CTL = 25 °CQH = 2400 kJ
Wmax = kJ
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at 4 °C in a kitchen at 25 °C, removing heat from the cold space at 2 kW. Find the minimum power input Ẇmin.
TH = 25 °CTL = 4 °CQ̇L = 2 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
A small loudspeaker radiates 0.02 W of sound power equally in all directions. Find the sound intensity level β at 10 m.
P = 0.02 Wr = 10 mI0 = 10⁻¹² W/m²
β = dB
20.Waves, sound & opticsHard
A sensor at rest sends ultrasound of 20 kHz towards a car that approaches at 25 m/s and mixes the echo with the emitted signal. Find the beat frequency fb (speed of sound 343 m/s).
f = 20 kHzu = 25 m/sv = 343 m/s
fb = Hz
3Solutions
1.Kinematics
Answer: t = 4.444 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Units
v₀ = 120/3.6 = 33.33 m/s
Braking time
0 = v₀ − a·t → t = v₀/a = 33.33/7.5 = 4.444 s
Answer
t = 4.444 s
2.Kinematics
Answer: t = 3.785 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−40 = 8·t − ½·9.81·t²
4.905·t² − 8·t − 40 = 0
Solve the quadratic
Only the positive root is physical.
t = (8 + √(8² + 2·9.81·40))/9.81 = 3.785 s
Answer
t = 3.785 s
3.Newton’s laws
Answer: T = 17.17 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Acceleration
The net driving force is the difference of the weights; it moves the total mass.
a = (7 − 1)·9.81/(7 + 1) = 7.357 m/s²
Tension from the lighter mass
T − m2·g = m2·a → T = 1·(9.81 + 7.357) = 17.17 N
Answer
T = 17.17 N
4.Newton’s laws
Answer: T = 13.33 N
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
With the same μ on both blocks, friction drops out: T = F·m₁/(m₁ + m₂).
5.Projectile motion
Answer: y = 5.897 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Time to the wall
vx = 26·cos 25° = 23.56 m/s
t = x/vx = 21/23.56 = 0.8912 s
Height at that time
y = 10.99·0.8912 − ½·9.81·0.8912² = 5.897 m
Answer
y = 5.897 m
The ball is still rising at the wall.
6.Projectile motion
Answer: x = 29.08 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.
vx = v0·cos θ = 13·cos 45° = 9.192 m/s
vy = v0·sin θ = 13·sin 45° = 9.192 m/s
Time in the air
Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.
0 = 20 + 9.192·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (9.192 + √(84.5 + 392.4))/9.81 = 3.163 s
Horizontal distance
x = vx·t = 9.192·3.163 = 29.08 m
Answer
x = 29.08 m
7.Work & energy
Answer: v = 10.54 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy balance along the slope
The block drops a height d·sin θ while friction removes μmg·cos θ·d. The mass cancels.
½v² = g·d·(sin θ − μ·cos θ)
v = √(2·9.81·10·(0.7071 − 0.2·0.7071)) = 10.54 m/s
Answer
v = 10.54 m/s
8.Work & energy
Answer: v = 6.771 m/s
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Forces along the slope
m·g = 15·9.81 = 147.2 N
mg·sin θ = 73.57 N
μ·mg·cos θ = 19.12 N
Work–energy
½mv² = (150 − 92.69)·6 = 343.9 J
v = √(2·343.9/15) = 6.771 m/s
Answer
v = 6.771 m/s
9.Momentum & collisions
Answer: v′1 = −2.222 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (1 − 3.5)/(1 + 3.5)·4 = −2.222 m/s
v′2 = 2·1/(1 + 3.5)·4 = 1.778 m/s
Answer
v′1 = −2.222 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: v = 60.77 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Rise of the block
h = L·(1 − cos θ) = 1.2·(1 − cos 20°) = 0.07237 m
Speed after impact
V = √(2·9.81·0.07237) = 1.192 m/s
Collision
v = (m + M)·V/m = 1.02·1.192/0.02 = 60.77 m/s
Answer
v = 60.77 m/s
11.Hydrostatic force
Answer: F = 67.44 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1.5 + 2.5/2 = 2.75 m
A = H·b = 2.5·1 = 2.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2.75·2.5 = 67.44 kN
Answer
F = 67.44 kN
12.Hydrostatic force
Answer: F = 58.86 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 2/2 = 2 m
A = H·b = 2·1.5 = 3 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·2·3 = 58.86 kN
Answer
F = 58.86 kN
13.Continuity & Bernoulli
Answer: Q = 177 L/s
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Continuity
v1 = v2·(150/300)² = 0.25·v2
Bernoulli between inlet and throat
The pipe is horizontal, so only pressure and velocity change.
p1 − p2 = ½ρv2²(1 − β⁴)
v2 = √(2·47000/(1000·(1 − 0.0625))) = 10.01 m/s
v1 = 2.503 m/s
Flow rate
Q = A2·v2 = 0.01767·10.01 = 0.177 m³/s = 177 L/s
Answer
Q = 177 L/s
14.Continuity & Bernoulli
Answer: p2 = 293.6 kPa
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperatures
TH = 475 + 273.15 = 748.1 K
TL = 25 + 273.15 = 298.1 K
Carnot efficiency
ηmax = 1 − TL/TH = 1 − 298.1/748.1 = 60.15 %
Maximum work
Wmax = ηmax·QH = 0.6015·2400 = 1444 kJ
Answer
Wmax = 1444 kJ
18.Heat engines & refrigerators
Answer: Ẇmin = 0.1515 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 2/13.2 = 0.1515 kW
Answer
Ẇmin = 0.1515 kW
19.Waves, sound & optics
Answer: β = 72.02 dB
Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).
Intensity
I = P/(4πr²) = 1.592 × 10⁻⁵ W/m²
Level
β = 10·log₁₀(1.592 × 10⁻⁵/10⁻¹²) = 72.02 dB
Answer
β = 72.02 dB
20.Waves, sound & optics
Answer: fb = 3145 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.