Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
a = ?s = 2200 m

A plane needs a speed of 250 km/h to take off and the usable runway is 2200 m long. Starting from rest, what constant acceleration a does it need?

v₀ = 0v = 250 km/hs = 2200 m
a = m/s²
2.KinematicsHard
v₀ = 8 m/s30 m

A ball is thrown straight up at 8 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.

v₀ = 8 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
θ = 35°a = ?m = 18 kg

An 18 kg block slides down a slope at 35° to the horizontal. The coefficient of kinetic friction is 0.1. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 18 kgθ = 35°μ = 0.1g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
2 kg10 kgTF = 55 Nμ = 0.2

Two blocks on a level floor are joined by a light horizontal string. A horizontal force of 55 N pulls the front 10 kg block; the 2 kg block is towed behind. The coefficient of kinetic friction is 0.2 for both blocks. Use g = 9.81 m/s². Find the acceleration a of the blocks.

m1 = 2 kgm2 = 10 kgF = 55 Nμ = 0.2g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?15°R = 120 m

A ball is launched from level ground at 15° above the horizontal and lands 120 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 15°R = 120 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
h = 20 mv0​ = 15 m/s40°x = ?

A ball is launched at 40° above horizontal from the top of a 20 m cliff. Ignore air resistance. Find the horizontal distance x travelled before the ball hits the ground.

v0 = 15 m/sθ = 40°h = 20 mg = 9.81 m/s²
x = m
7.Work & energyMedium
40°d = 3 mμ = 0.4

A 4 kg block slides 3 m down a slope at 40° to the horizontal, with a coefficient of kinetic friction of 0.4. Find the work Wf done against friction.

m = 4 kgθ = 40°μ = 0.4d = 3 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
h = 10.5 mR = 3 mv = ?

A 0.5 kg cart is released from rest at a height of 10.5 m on a smooth track that leads into a vertical circular loop of radius 3 m. Find the speed v of the cart at the top of the loop.

m = 0.5 kgh = 10.5 mR = 3 mg = 9.81 m/s²
v = m/s
9.Momentum & collisionsMedium
10 kg46 m/s3 kgv′2​ = ?

A 13 kg projectile moving horizontally at 22 m/s explodes into two fragments that move along the same line. The 10 kg fragment continues forwards at 46 m/s. Find the velocity v′2 of the 3 kg fragment (positive in the original direction).

M = 13 kgu = 22 m/sm1 = 10 kgv′1 = 46 m/sm2 = 3 kg
v′2 = m/s
10.Momentum & collisionsHard
14 m/s16 m/s

A 0.25 kg ball hits a wall at 14 m/s and bounces straight back at 16 m/s. The contact lasts 40 ms. Find the average force Favg of the wall on the ball.

m = 0.25 kgvin = 14 m/svout = 16 m/sΔt = 40 ms
Favg = N
11.Hydrostatic forceMedium
gated = 1 mH = 2 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of water, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 2 mb = 3 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 1 mH = 2 m

A vertical rectangular gate 2 m wide sits in the wall of a tank of glycerin, with its top edge 1 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1 mH = 2 mb = 2 mρ = 1260 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 100 mm, p1​ = 170 kPad2​ = 75 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 100 mm to 75 mm. In the wide section the pressure is 170 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 100 mmd2 = 75 mmp1 = 170 kPav1 = 0.5 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
12d1​ = 75 mm, p1​ = 140 kPad2​ = 50 mm, p2​ = ?Δz = 8 m

Water flows up through a pipe that narrows from 75 mm to 50 mm while rising 8 m. At section 1 the pressure is 140 kPa and the velocity is 2.75 m/s. Ignoring losses, find the pressure p2 at section 2.

d1 = 75 mmd2 = 50 mmp1 = 140 kPav1 = 2.75 m/sΔz = 8 mρ = 1000 kg/m³
p2 = kPa
15.Ideal gas lawMedium
40 g of CO₂V = 5 LT = 20 °CP = ?

A tank of 5 L contains 40 g of CO₂ at 20 °C. Treat it as an ideal gas and find the pressure P.

m = 40 gM = 44.01 g/molV = 5 LT = 20 °CR = 8.314 J/(mol·K)
P = kPa
16.Ideal gas lawHard
State 1State 2

A fixed amount of CH₄ goes from 200 kPa, 5 L, 25 °C to 300 kPa and 100 °C. Find the new volume V2.

P1 = 200 kPaV1 = 5 LT1 = 25 °CP2 = 300 kPaT2 = 100 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 850 °CTL​ = 15 °CEQH​QL​η = 52%

A heat engine receives heat from a source at 850 °C and rejects heat to the surroundings at 15 °C. Its actual thermal efficiency is 52%. Find its second-law efficiency ηII, the ratio of the actual efficiency to the Carnot efficiency.

TH = 850 °CTL = 15 °Cη = 52%
ηII = %
18.Heat engines & refrigeratorsHard
TH​ = 21 °CTL​ = 5 °CHPQ̇H​ = 12 kWQ̇L​Ẇ = ?

A heat pump keeps a house at 21 °C while it is 5 °C outside, delivering 12 kW of heat to the house. Find the minimum power input Ẇmin.

TH = 21 °CTL = 5 °CQ̇H = 12 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
FF4 cmdo​ = 8 cmf = 30 cm

An object 4 cm tall stands 8 cm in front of a thin converging lens with a focal length of 30 cm. Find the image height hi (negative for an inverted image).

ho = 4 cmdo = 8 cmf = 30 cm
hi = cm
20.Waves, sound & opticsHard
λ = 589 nmd = 0.1 mmL = 1.5 my = ?

Light of wavelength 589 nm falls on two slits 0.1 mm apart. The screen is 1.5 m away. Find the distance y5 from the central bright fringe to bright fringe number 5.

λ = 589 nmd = 0.1 mmL = 1.5 mm = 5
y5 = mm

3Solutions

1.Kinematics

Answer: a = 1.096 m/s²

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Units

v = 250/3.6 = 69.44 m/s

Acceleration

a = v²/(2s) = 69.44²/(2·2200) = 1.096 m/s²

Answer

a = 1.096 m/s²
2.Kinematics

Answer: t = 3.42 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equation of motion

Up is positive and the ground is h₀ below the starting point.

−30 = 8·t − ½·9.81·t²
4.905·t² − 8·t − 30 = 0

Solve the quadratic

Only the positive root is physical.

t = (8 + √(8² + 2·9.81·30))/9.81 = 3.42 s

Answer

t = 3.42 s
3.Newton’s laws

Answer: a = 4.823 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 35° − 0.1·cos 35°) = 9.81·(0.5736 − 0.08192) = 4.823 m/s²

Answer

a = 4.823 m/s²
4.Newton’s laws

Answer: a = 2.621 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Whole system

a = (F − μ·(m1 + m2)·g)/(m1 + m2) = (55 − 23.54)/12 = 2.621 m/s²

Answer

a = 2.621 m/s²
5.Projectile motion

Answer: v0 = 48.52 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·120/sin 30°) = 48.52 m/s

Answer

v0 = 48.52 m/s
6.Projectile motion

Answer: x = 37.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

Horizontal velocity stays constant; vertical motion has a constant acceleration g = 9.81 m/s² downward.

vx = v0·cos θ = 15·cos 40° = 11.49 m/s
vy = v0·sin θ = 15·sin 40° = 9.642 m/s

Time in the air

Solve y(t) = h + vy·t − ½gt² = 0 for the positive root.

0 = 20 + 9.642·t − 4.905·t²
t = (vy + √(vy² + 2gh))/g = (9.642 + √(92.96 + 392.4))/9.81 = 3.229 s

Horizontal distance

x = vx·t = 11.49·3.229 = 37.1 m

Answer

x = 37.1 m
7.Work & energy

Answer: Wf = 36.07 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 39.24·0.766 = 30.06 N
F = μN = 0.4·30.06 = 12.02 N

Work against friction

Wf = F·d = 12.02·3 = 36.07 J

Answer

Wf = 36.07 J
8.Work & energy

Answer: v = 9.396 m/s

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d). On a circular path the net force towards the centre must equal mv²/r.

Speed at the top

v² = 2g(h − 2R) = 2·9.81·(10.5 − 6) = 88.29 m²/s²
v = 9.396 m/s

Answer

v = 9.396 m/s

The cart just makes it round when h = 2.5R; then N = 0 at the top.

9.Momentum & collisions

Answer: v′2 = −58 m/s

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Momentum before

p = M·u = 13·22 = 286 kg·m/s

Momentum after

286 = 10·46 + 3·v′2
v′2 = (286 − 460)/3 = −58 m/s

Answer

v′2 = −58 m/s

The minus sign means the second fragment flies backwards.

10.Momentum & collisions

Answer: Favg = 187.5 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.25·(16 + 14) = 7.5 N·s

Average force

Favg = J/Δt = 7.5/0.04 = 187.5 N

Answer

Favg = 187.5 N
11.Hydrostatic force

Answer: F = 117.7 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 2/2 = 2 m
A = H·b = 2·3 = 6 m²
gated = 1 mH = 2 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2·6 = 117.7 kN

Answer

F = 117.7 kN
12.Hydrostatic force

Answer: F = 98.88 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1 + 2/2 = 2 m
A = H·b = 2·2 = 4 m²
gated = 1 mH = 2 mF

Resultant force

F = ρ·g·yc·A = 1260·9.81·2·4 = 98.88 kN

Answer

F = 98.88 kN
13.Continuity & Bernoulli

Answer: p2 = 169.7 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.5·(100/75)² = 0.8889 m/s
½ρ(v1² − v2²) = ½·1000·(0.5² − 0.8889²)/1000 = −0.2701 kPa
p2 = p1 + ½ρ(v1² − v2²) = 170 + (−0.2701) = 169.7 kPa

Answer

p2 = 169.7 kPa
14.Continuity & Bernoulli

Answer: p2 = 46.16 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 2.75·(75/50)² = 6.188 m/s
½ρ(v1² − v2²) = ½·1000·(2.75² − 6.188²)/1000 = −15.36 kPa
ρgΔz = 1000·9.81·8/1000 = 78.48 kPa
p2 = p1 + ½ρ(v1² − v2²) − ρgΔz = 140 + (−15.36) − 78.48 = 46.16 kPa

Answer

p2 = 46.16 kPa
15.Ideal gas law

Answer: P = 443 kPa

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = m/M = 40/44.01 = 0.9089 mol
T = 20 + 273.15 = 293.1 K

Pressure

P = nRT/V = 0.9089·8.314·293.1/0.005 = 443 kPa

Answer

P = 443 kPa
16.Ideal gas law

Answer: V2 = 4.172 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 298.1 K, T2 = 373.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 5·(200/300)·(373.1/298.1) = 4.172 L

Answer

V2 = 4.172 L
17.Heat engines & refrigerators

Answer: ηII = 69.94 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 850 + 273.15 = 1123 K
TL = 15 + 273.15 = 288.1 K

Carnot efficiency

ηCarnot = 1 − 288.1/1123 = 74.34 %

Second-law efficiency

ηII = η/ηCarnot = 52/74.34 = 69.94 %

Answer

ηII = 69.94 %
18.Heat engines & refrigerators

Answer: Ẇmin = 0.6527 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 21 + 273.15 = 294.1 K
TL = 5 + 273.15 = 278.1 K

Best possible COP

COPHP,max = TH/(TH − TL) = 294.1/(294.1 − 278.1) = 18.38

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇H/COP = 12/18.38 = 0.6527 kW

Answer

Ẇmin = 0.6527 kW
19.Waves, sound & optics

Answer: hi = 5.455 cm

Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.

Thin-lens equation

1/di = 1/f − 1/do = 1/30 − 1/8
di = −10.91 cm
FF8 cmf = 30 cm

Magnification and height

m = −(−10.91)/8 = 1.364
hi = 1.364·4 = 5.455 cm

Answer

hi = 5.455 cm
20.Waves, sound & optics

Answer: y5 = 44.17 mm

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Fringe spacing

Δy = λL/d = 589 × 10⁻⁹·1.5/(0.1 × 10⁻³) = 8.835 mm

Fringe number 5

y5 = 5·8.835 = 44.17 mm

Answer

y5 = 44.17 mm

ExamProblems · examproblems.com/courses/physics-for-engineers