Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.
2Practice problems
1.KinematicsMedium
A car speeding at a constant 31 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 3.5 m/s². How far from its starting point does the police car catch up? Find d.
vcar = 31 m/sapolice = 3.5 m/s²v0,police = 0
d = m
2.KinematicsHard
A ball is thrown straight up at 8 m/s from the edge of a roof 30 m above the ground. Ignore air resistance and use g = 9.81 m/s². How long after the throw does it hit the ground? Find t.
v₀ = 8 m/sh₀ = 30 mg = 9.81 m/s²
t = s
3.Newton’s lawsMedium
A 3 kg block slides down a slope at 45° to the horizontal. The coefficient of kinetic friction is 0.3. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.
m = 3 kgθ = 45°μ = 0.3g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
A 2.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 5 kg mass. The coefficient of kinetic friction between block and table is 0.1. Use g = 9.81 m/s². Find the tension T in the string.
m1 = 2.5 kgm2 = 5 kgμ = 0.1g = 9.81 m/s²
T = N
5.Projectile motionMedium
A ball is launched from level ground at 70° above the horizontal and lands 25 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.
θ = 70°R = 25 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
A ball is thrown from ground level at 18 m/s and 55° above the horizontal. It lands on the flat roof of a building 5 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.
v₀ = 18 m/sθ = 55°hroof = 5 mg = 9.81 m/s²
x = m
7.Work & energyMedium
A 0.5 kg block slides 12 m down a slope at 35° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.
m = 0.5 kgθ = 35°μ = 0.2d = 12 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
A 10 kg block is released from rest at height 3 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 4.5 m long (μ = 0.3) and then runs onto a spring (k = 2500 N/m) on a smooth surface. Find the maximum compression x of the spring.
m = 10 kgh = 3 mL = 4.5 mμ = 0.3k = 2500 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
A 4 kg glider moving at 2 m/s makes a perfectly elastic head-on collision with a 5 kg glider at rest on a frictionless track. Find the velocity v′1 of the first glider after the collision (positive in its original direction).
m1 = 4 kgm2 = 5 kgv1 = 2 m/sv2 = 0
v′1 = m/s
10.Momentum & collisionsHard
At a crossing a 1200 kg car travelling east at 20 m/s collides with an 800 kg car travelling north at 19 m/s. The cars lock together. Find the direction θ of the wreck just after the collision, measured north of east.
m1 = 1200 kgv1 = 20 m/s (E)m2 = 800 kgv2 = 19 m/s (N)
θ = °
11.Hydrostatic forceMedium
A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 3 m below the surface. Find the resultant hydrostatic force F on the gate.
A vertical rectangular gate 1.5 m wide sits in the wall of a tank of oil, with its top edge 1 m below the surface. Find the depth ycp of the centre of pressure below the surface.
d = 1 mH = 3 mb = 1.5 mρ = 880 kg/m³g = 9.81 m/s²
ycp = m
13.Continuity & BernoulliMedium
Water drains from a large open tank through a sharp-edged orifice with a diameter of 30 mm. The water level is kept 1 m above the orifice and the discharge coefficient is 0.64. Find the flow rate Q. Use g = 9.81 m/s².
d = 30 mmh = 1 mCd = 0.64g = 9.81 m/s²
Q = L/s
14.Continuity & BernoulliHard
A closed water tank has compressed air above the water at a gauge pressure of 150 kPa. Water leaves through an opening with a diameter of 50 mm, 1.5 m below the water surface, into the open air. Ignoring losses, find the flow rate Q. Use g = 9.81 m/s².
A reversible (Carnot) heat engine takes in 3600 kJ of heat from a reservoir at 375 °C and rejects 1767 kJ per cycle. Find the temperature TL of the cold reservoir in °C.
TH = 375 °CQH = 3600 kJQL = 1767 kJ
TL = °C
18.Heat engines & refrigeratorsHard
A refrigerator keeps its cold space at -20 °C in a kitchen at 30 °C, removing heat from the cold space at 3.5 kW. Find the minimum power input Ẇmin.
TH = 30 °CTL = -20 °CQ̇L = 3.5 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
An object 4 cm tall stands 40 cm in front of a thin diverging lens with a focal length of 25 cm. Find the image height hi (negative for an inverted image).
ho = 4 cmdo = 40 cmf = −25 cm
hi = cm
20.Waves, sound & opticsHard
A sensor at rest sends ultrasound of 30 kHz towards a car that approaches at 15 m/s and mixes the echo with the emitted signal. Find the beat frequency fb (speed of sound 343 m/s).
f = 30 kHzu = 15 m/sv = 343 m/s
fb = Hz
3Solutions
1.Kinematics
Answer: d = 549.1 m
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equal distances
v·t = ½·a·t² → t = 2v/a = 2·31/3.5 = 17.71 s
Distance
d = v·t = 31·17.71 = 549.1 m
Answer
d = 549.1 m
At that moment the police car moves at 2v = 62 m/s.
2.Kinematics
Answer: t = 3.42 s
Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.
Equation of motion
Up is positive and the ground is h₀ below the starting point.
−30 = 8·t − ½·9.81·t²
4.905·t² − 8·t − 30 = 0
Solve the quadratic
Only the positive root is physical.
t = (8 + √(8² + 2·9.81·30))/9.81 = 3.42 s
Answer
t = 3.42 s
3.Newton’s laws
Answer: a = 4.856 m/s²
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Solve the range formula for v₀
v₀ = √(g·R/sin 2θ) = √(9.81·25/sin 140°) = 19.53 m/s
Answer
v0 = 19.53 m/s
6.Projectile motion
Answer: x = 27.01 m
Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.
Split the launch velocity
vx = 10.32 m/s, vy = 14.74 m/s
Time to land on the roof
Larger root: the ball is descending.
5 = 14.74·t − 4.905·t²
t = (14.74 + √(14.74² − 2·9.81·5))/9.81 = 2.616 s
Horizontal distance
x = vx·t = 10.32·2.616 = 27.01 m
Answer
x = 27.01 m
7.Work & energy
Answer: Wf = 9.643 J
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Friction force
N = mg·cos θ = 4.905·0.8192 = 4.018 N
F = μN = 0.2·4.018 = 0.8036 N
Work against friction
Wf = F·d = 0.8036·12 = 9.643 J
Answer
Wf = 9.643 J
8.Work & energy
Answer: x = 35.98 cm
Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).
Energy left after the rough strip
The ramp is smooth, so only the strip removes energy.
mgh − μmgL = 98.1·(3 − 0.3·4.5) = 161.9 J
Maximum compression
½kx² = 161.9 → x = √(2·161.9/2500) = 0.3598 m = 35.98 cm
Answer
x = 35.98 cm
9.Momentum & collisions
Answer: v′1 = −0.2222 m/s
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Elastic collision with a target at rest
Solving momentum and energy conservation together gives these two results.
v′1 = (4 − 5)/(4 + 5)·2 = −0.2222 m/s
v′2 = 2·4/(4 + 5)·2 = 1.778 m/s
Answer
v′1 = −0.2222 m/s
The minus sign means the first glider bounces back.
10.Momentum & collisions
Answer: θ = 32.35 °
Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.
Momentum components
px = 1200·20 = 24000 kg·m/s
py = 800·19 = 15200 kg·m/s
Direction
tan θ = py/px = 0.6333 → θ = 32.35°
Answer
θ = 32.35°
11.Hydrostatic force
Answer: F = 104.2 kN
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 3 + 2.5/2 = 4.25 m
A = H·b = 2.5·1 = 2.5 m²
Resultant force
F = ρ·g·yc·A = 1000·9.81·4.25·2.5 = 104.2 kN
Answer
F = 104.2 kN
12.Hydrostatic force
Answer: ycp = 2.8 m
Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.
Centroid depth and area
yc = d + H/2 = 1 + 3/2 = 2.5 m
A = H·b = 3·1.5 = 4.5 m²
Resultant force
F = ρ·g·yc·A = 880·9.81·2.5·4.5 = 97.12 kN
Centre of pressure
Pressure grows with depth, so the resultant acts below the centroid.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Ideal jet velocity
√(2gh) = √(2·9.81·1) = 4.429 m/s
Actual flow rate
The discharge coefficient accounts for the contraction of the jet and friction at the edge.
Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.
Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.
Absolute temperatures
T1 = 293.1 K, T2 = 453.1 K
Combined gas law
V2 = V1·(P1/P2)·(T2/T1) = 5·(250/500)·(453.1/293.1) = 3.864 L
Answer
V2 = 3.864 L
17.Heat engines & refrigerators
Answer: TL = 44.98 °C
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
Absolute temperature of the source
TH = 375 + 273.15 = 648.1 K
Reversible heat ratio
TL = TH·QL/QH = 648.1·1767/3600 = 318.1 K = 44.98 °C
Answer
TL = 44.98 °C
18.Heat engines & refrigerators
Answer: Ẇmin = 0.6913 kW
Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.
The least work is needed by a reversible machine, which has the highest COP.
Ẇmin = Q̇L/COP = 3.5/5.063 = 0.6913 kW
Answer
Ẇmin = 0.6913 kW
19.Waves, sound & optics
Answer: hi = 1.538 cm
Geometric optics: at a boundary, n₁·sin θ₁ = n₂·sin θ₂ (Snell's law), with angles measured from the normal and n = c/v. Going into a slower medium the ray bends towards the normal. From a denser medium (n₁ > n₂) beyond the critical angle θc = arcsin(n₂/n₁) all light is reflected: total internal reflection. Thin lenses and spherical mirrors obey 1/f = 1/do + 1/di with the magnification m = −di/do. Sign convention: f > 0 for a converging lens and a concave mirror (f = R/2), f < 0 for a diverging lens and a convex mirror; di > 0 for a real image, di < 0 for a virtual one, and m < 0 for an inverted image.
Thin-lens equation
1/di = 1/f − 1/do = 1/(−25) − 1/40
di = −15.38 cm
Magnification and height
m = −(−15.38)/40 = 0.3846
hi = 0.3846·4 = 1.538 cm
Answer
hi = 1.538 cm
20.Waves, sound & optics
Answer: fb = 2744 Hz
Standing waves and the Doppler effect: a string fixed at both ends, or a pipe open at both ends, fits whole half-wavelengths: L = nλ/2, fn = n·v/(2L), n = 1, 2, 3, … A pipe closed at one end has a node at the closed end and an antinode at the open end: L = nλ/4 with odd n only, fn = n·v/(4L). When source or observer move along the line between them, f′ = f·(v ± vo)/(v ∓ vs): use the upper signs for motion towards each other. Two waves of nearly equal frequency beat at |f₁ − f₂|.