Physics for Engineers: cram pack

Formula sheets, the key method steps for every topic and 20 practice problems, with full solutions at the back.

New problemsBack to the course

In the print window, choose “Save as PDF” to keep a copy on your device.

1Formulas and methods

Kinematics

Velocity
v = v0 + a·t
Displacement
s = v0·t + ½·a·t²
Without time
v² = v0² + 2·a·s
Units
1 m/s = 3.6 km/h

Method

  1. List what you know: v₀, v, a, t and s, with units.
  2. Pick the equation that contains your three knowns and the unknown.
  3. Choose one positive direction and give opposing quantities a minus sign.
  4. Solve and check that the answer is physically sensible.

Newton’s laws

Second law
ΣF = m·a
Weight
W = m·g
Kinetic friction
Ff = μ·N
On a slope
along: m·g·sin θ, normal: m·g·cos θ

Method

  1. Draw a free-body diagram with every force on the body.
  2. Choose a positive direction along the motion.
  3. Split forces into components along and perpendicular to the motion (on a slope: m·g·sin θ along, m·g·cos θ into the slope).
  4. Apply ΣF = m·a along the motion; friction is μ·N against the motion.

Projectile motion

Components
vx = v0cos θ, vy = v0sin θ
Position
x = vxt, y = h + vyt − ½gt²
Maximum height
H = h + vy²/(2g)
Range (level ground)
R = v0²·sin 2θ/g

Method

  1. Split the launch velocity into components: vx = v₀·cos θ and vy = v₀·sin θ.
  2. The horizontal motion has constant speed; the vertical motion has acceleration −g.
  3. Find the time of flight from the vertical motion.
  4. Use that time in the horizontal motion to find the range.

Work & energy

Kinetic energy
Ek = ½mv²
Potential energy
Ep = mgh
Energy balance
Ek1 + Ep1 + W = Ek2 + Ep2 + losses
Work of friction
W = μ·N·d
Power
P = W/t

Momentum & collisions

Momentum
p = m·v
Conservation
Σm·v (before) = Σm·v (after)
Perfectly inelastic
v′ = (m1v1 + m2v2)/(m1 + m2)
Impulse
J = F·Δt = m·Δv

Method

  1. Choose a positive direction and give each velocity its sign.
  2. Write the total momentum before: Σm·v.
  3. For a perfectly inelastic collision the bodies move together after; for an elastic one kinetic energy is also conserved.
  4. Set momentum before equal to momentum after and solve.

Hydrostatic force

Pressure at depth
p = ρgh
Force on a vertical wall
F = ρg·hc·A
Centre of pressure
yp = yc + Ic/(ycA)
Rectangle
Ic = bH³/12

Continuity & Bernoulli

Continuity
A1v1 = A2v2
Bernoulli
p1 + ½ρv1² + ρgz1 = p2 + ½ρv2² + ρgz2
Flow rate
Q = A·v
Circle area
A = πd²/4

Ideal gas law

Ideal gas law
pV = nRT
Gas constant
R = 8.314 J/(mol·K)
Combined gas law
p1V1/T1 = p2V2/T2
Moles
n = m/M
Temperature
T[K] = T[°C] + 273.15

Heat engines & refrigerators

Efficiency
η = W/QH = 1 − QC/QH
Carnot efficiency
ηC = 1 − TC/TH (kelvin)
Refrigerator COP
COPR = QC/W
Heat pump COP
COPHP = QH/W = COPR + 1
Energy balance
QH = W + QC

Waves, sound & optics

Wave speed
v = fλ, T = 1/f
String
v = √(T/μ), μ = m/L
Sound level
β = 10·log10(I/I0), I0 = 10⁻¹² W/m²
Point source
I = P/(4πr²)
Standing waves
string or open pipe fn = n·v/(2L); closed pipe fn = n·v/(4L), n odd
Doppler effect
f′ = f·(v ± vo)/(v ∓ vs)
Refractive index
n = c/v, λ = λ0/n
Snell’s law
n1sin θ1 = n2sin θ2
Critical angle
sin θc = n2/n1
Optical fibre
NA = sin θa = √(n1² − n2²)
Lenses and mirrors
1/f = 1/do + 1/di, m = −di/do, mirror f = R/2
Double slit
d·sin θ = mλ, ym = mλL/d
Grating
d = 1/N, d·sin θ = mλ, mmax ≤ d/λ
Single slit
a·sin θ = mλ (dark), w = 2λL/a

Method

  1. Identify the kind of problem: wave speed, sound level, standing wave, Doppler, refraction, lens or mirror, or interference.
  2. Write the relation first: v = fλ, β = 10·log(I/I₀), fₙ = n·v/(2L) or n·v/(4L), f′ = f(v ± vo)/(v ∓ vs), n₁sin θ₁ = n₂sin θ₂, 1/f = 1/d₀ + 1/dᵢ, d·sin θ = mλ.
  3. Convert units: nm, mm and cm to m, and check whether angles are measured from the normal.
  4. Check signs and plausibility: a virtual image has dᵢ < 0, an approaching source sounds higher, a closed pipe has only odd harmonics.

2Practice problems

1.KinematicsMedium
policea = 2 m/s²car28 m/s

A car speeding at a constant 28 m/s passes a police car standing still. At that moment the police car starts and accelerates uniformly at 2 m/s². How long does it take the police car to catch up? Find t.

vcar = 28 m/sapolice = 2 m/s²v0,police = 0
t = s
2.KinematicsHard
d = ?

A stone is dropped from rest into a well. The splash is heard 3.8 s after the stone is released. The speed of sound is 343 m/s; ignore air resistance and use g = 9.81 m/s². Find the depth d of the well.

ttotal = 3.8 svsound = 343 m/sg = 9.81 m/s²
d = m
3.Newton’s lawsMedium
θ = 30°a = ?m = 8 kg

An 8 kg block slides down a slope at 30° to the horizontal. The coefficient of kinetic friction is 0.15. Use g = 9.81 m/s². Find the acceleration a of the block along the slope.

m = 8 kgθ = 30°μ = 0.15g = 9.81 m/s²
a = m/s²
4.Newton’s lawsHard
m1​ = 2.5 kg4 kgμ = 0.3

A 2.5 kg block on a horizontal table is connected by a light string over a frictionless pulley to a hanging 4 kg mass. The coefficient of kinetic friction between block and table is 0.3. Use g = 9.81 m/s². Find the acceleration a of the system.

m1 = 2.5 kgm2 = 4 kgμ = 0.3g = 9.81 m/s²
a = m/s²
5.Projectile motionMedium
v0​ = ?70°R = 15 m

A ball is launched from level ground at 70° above the horizontal and lands 15 m away. Ignore air resistance and use g = 9.81 m/s². Find the launch speed v0.

θ = 70°R = 15 mg = 9.81 m/s²
v0 = m/s
6.Projectile motionHard
19 mv0​ = 38 m/s70°x = ?

A ball is thrown from ground level at 38 m/s and 70° above the horizontal. It lands on the flat roof of a building 19 m high, on its way down. Ignore air resistance and use g = 9.81 m/s². Find the horizontal distance x from the launch point to where it lands.

v₀ = 38 m/sθ = 70°hroof = 19 mg = 9.81 m/s²
x = m
7.Work & energyMedium
30°d = 15 mμ = 0.2

A 5 kg block slides 15 m down a slope at 30° to the horizontal, with a coefficient of kinetic friction of 0.2. Find the work Wf done against friction.

m = 5 kgθ = 30°μ = 0.2d = 15 mg = 9.81 m/s²
Wf = J
8.Work & energyHard
h = 3.5 mL = 1.5 mμ = 0.1k = 5000 N/m

A 2.5 kg block is released from rest at height 3.5 m on a smooth ramp. At the bottom it crosses a rough horizontal strip 1.5 m long (μ = 0.1) and then runs onto a spring (k = 5000 N/m) on a smooth surface. Find the maximum compression x of the spring.

m = 2.5 kgh = 3.5 mL = 1.5 mμ = 0.1k = 5000 N/mg = 9.81 m/s²
x = cm
9.Momentum & collisionsMedium
1800 kg12 m/s1500 kg

A 1800 kg car moving at 12 m/s runs into a stationary 1500 kg car and the two lock together. How much kinetic energy ΔK is lost in the collision?

m1 = 1800 kgv1 = 12 m/sm2 = 1500 kgv2 = 0
ΔK = J
10.Momentum & collisionsHard
13 m/s20 m/s

A 0.5 kg ball hits a wall at 13 m/s and bounces straight back at 20 m/s. The contact lasts 10 ms. Find the average force Favg of the wall on the ball.

m = 0.5 kgvin = 13 m/svout = 20 m/sΔt = 10 ms
Favg = N
11.Hydrostatic forceMedium
gated = 1.5 mH = 2 m

A vertical rectangular gate 1 m wide sits in the wall of a tank of water, with its top edge 1.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 1.5 mH = 2 mb = 1 mρ = 1000 kg/m³g = 9.81 m/s²
F = kN
12.Hydrostatic forceHard
gated = 0.5 mH = 1.5 m

A vertical rectangular gate 3 m wide sits in the wall of a tank of oil, with its top edge 0.5 m below the surface. Find the resultant hydrostatic force F on the gate.

d = 0.5 mH = 1.5 mb = 3 mρ = 880 kg/m³g = 9.81 m/s²
F = kN
13.Continuity & BernoulliMedium
12d1​ = 75 mm, p1​ = 340 kPad2​ = 25 mm, p2​ = ?

Water flows through a horizontal pipe that narrows from 75 mm to 25 mm. In the wide section the pressure is 340 kPa and the velocity is 0.5 m/s. Ignoring losses, find the pressure p2 in the narrow section.

d1 = 75 mmd2 = 25 mmp1 = 340 kPav1 = 0.5 m/sρ = 1000 kg/m³
p2 = kPa
14.Continuity & BernoulliHard
H = ?d1​ = 75 mmp1​ = 40 kPad2​ = 25 mm

A fountain nozzle points straight up. Just below the nozzle the supply pipe has a diameter of 75 mm and a gauge pressure of 40 kPa. The nozzle exit diameter is 25 mm, and the height difference across the nozzle is negligible. Ignoring losses and air resistance, find the height H the jet rises above the nozzle. Use g = 9.81 m/s².

d1 = 75 mmp1 = 40 kPa (gauge)d2 = 25 mmρ = 1000 kg/m³g = 9.81 m/s²
H = m
15.Ideal gas lawMedium
420 g of HeP = 250 kPaT = 10 °CV = ?

What volume V does 420 g of He occupy at 250 kPa and 10 °C? Treat it as an ideal gas.

m = 420 gM = 4.003 g/molP = 250 kPaT = 10 °CR = 8.314 J/(mol·K)
V = L
16.Ideal gas lawHard
State 1State 2

A fixed amount of Ar goes from 300 kPa, 20 L, 25 °C to 400 kPa and 250 °C. Find the new volume V2.

P1 = 300 kPaV1 = 20 LT1 = 25 °CP2 = 400 kPaT2 = 250 °C
V2 = L
17.Heat engines & refrigeratorsMedium
TH​ = 400 °CTL​ = 40 °CEQH​QL​W

A heat engine works between a hot reservoir at 400 °C and a cold reservoir at 40 °C. Find the highest possible thermal efficiency ηmax.

TH = 400 °CTL = 40 °C
ηmax = %
18.Heat engines & refrigeratorsHard
TH​ = 20 °CTL​ = 5 °CHPQ̇H​ = 15 kWQ̇L​Ẇ = ?

A heat pump keeps a house at 20 °C while it is 5 °C outside, delivering 15 kW of heat to the house. Find the minimum power input Ẇmin.

TH = 20 °CTL = 5 °CQ̇H = 15 kW
Ẇmin = kW
19.Waves, sound & opticsMedium
Pβ = ?r = 1 m

A small loudspeaker radiates 2 W of sound power equally in all directions. Find the sound intensity level β at 1 m.

P = 2 Wr = 1 mI0 = 10⁻¹² W/m²
β = dB
20.Waves, sound & opticsHard
λ = 500 nmθ

A diffraction grating has 1200 lines per millimetre. Light of wavelength 500 nm falls on it at right angles. What is the highest order mmax of bright maximum that can be seen?

N = 1200 mm⁻¹λ = 500 nm
mmax =

3Solutions

1.Kinematics

Answer: t = 28 s

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Equal distances

v·t = ½·a·t² → t = 2v/a = 2·28/2 = 28 s

Answer

t = 28 s

At that moment the police car moves at 2v = 56 m/s.

2.Kinematics

Answer: d = 64.04 m

Motion with constant acceleration: v = v₀ + a·t, s = v₀·t + ½·a·t² and v² = v₀² + 2·a·s. Pick the equation that contains the three things you know and the one you want, and keep the signs consistent with one positive direction.

Two parts of the time

½·9.81·t₁² = 343·(3.8 − t₁)
4.905·t₁² + 343·t₁ − 1303 = 0

Fall time

Only the positive root is physical.

t₁ = (−343 + √(343² + 4·4.905·1303))/(2·4.905) = 3.613 s

Depth

d = ½·9.81·3.613² = 64.04 m

Answer

d = 64.04 m
3.Newton’s laws

Answer: a = 3.631 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Forces along the slope

Down the slope is positive.

m·a = m·g·sin θ − μ·m·g·cos θ

Acceleration

a = 9.81·(sin 30° − 0.15·cos 30°) = 9.81·(0.5 − 0.1299) = 3.631 m/s²

Answer

a = 3.631 m/s²
4.Newton’s laws

Answer: a = 4.905 m/s²

Newton’s second law: the net force on a body equals its mass times its acceleration, ΣF = m·a. Draw a free-body diagram, choose a positive direction along the motion, and add every force in that direction: applied forces, friction μ·N against the motion, and the components of gravity.

Acceleration of the system

a = (m2·g − μ·m1·g)/(m1 + m2) = (39.24 − 7.357)/6.5 = 4.905 m/s²

Answer

a = 4.905 m/s²
5.Projectile motion

Answer: v0 = 15.13 m/s

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Solve the range formula for v₀

v₀ = √(g·R/sin 2θ) = √(9.81·15/sin 140°) = 15.13 m/s

Answer

v0 = 15.13 m/s
6.Projectile motion

Answer: x = 87.1 m

Projectile motion: with no air resistance, x = vxt and y = h + vyt − ½gt². The two directions are independent except that they share the same time.

Split the launch velocity

vx = 13 m/s, vy = 35.71 m/s

Time to land on the roof

Larger root: the ball is descending.

19 = 35.71·t − 4.905·t²
t = (35.71 + √(35.71² − 2·9.81·19))/9.81 = 6.702 s

Horizontal distance

x = vx·t = 13·6.702 = 87.1 m

Answer

x = 87.1 m
7.Work & energy

Answer: Wf = 127.4 J

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Friction force

N = mg·cos θ = 49.05·0.866 = 42.48 N
F = μN = 0.2·42.48 = 8.496 N

Work against friction

Wf = F·d = 8.496·15 = 127.4 J

Answer

Wf = 127.4 J
8.Work & energy

Answer: x = 18.13 cm

Work–energy principle: the change in kinetic energy equals the work done by all forces. Writing gravity and springs as potential energy (mgh and ½kx²) turns this into a balance: initial energy = final energy + energy lost to friction (μN·d).

Energy left after the rough strip

The ramp is smooth, so only the strip removes energy.

mgh − μmgL = 24.53·(3.5 − 0.1·1.5) = 82.16 J

Maximum compression

½kx² = 82.16 → x = √(2·82.16/5000) = 0.1813 m = 18.13 cm

Answer

x = 18.13 cm
9.Momentum & collisions

Answer: ΔK = 58909 J

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Common velocity

v′ = m1·v1/(m1 + m2) = 1800·12/3300 = 6.545 m/s

Kinetic energy before and after

Kbefore = ½·1800·12² = 129600 J
Kafter = ½·3300·6.545² = 70691 J

Energy lost

ΔK = 129600 − 70691 = 58909 J

Answer

ΔK = 58909 J

The lost energy goes into deformation, heat and sound.

10.Momentum & collisions

Answer: Favg = 1650 N

Conservation of momentum: when no external force acts during a collision, the total momentum Σm·v before equals the total after. Velocities have a direction, so pick a positive direction and give velocities the other way a minus sign. In an elastic collision kinetic energy is conserved too; in a perfectly inelastic one the bodies stick together.

Change in momentum

J = m·Δv = 0.5·(20 + 13) = 16.5 N·s

Average force

Favg = J/Δt = 16.5/0.01 = 1650 N

Answer

Favg = 1650 N
11.Hydrostatic force

Answer: F = 49.05 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 1.5 + 2/2 = 2.5 m
A = H·b = 2·1 = 2 m²
gated = 1.5 mH = 2 mF

Resultant force

F = ρ·g·yc·A = 1000·9.81·2.5·2 = 49.05 kN

Answer

F = 49.05 kN
12.Hydrostatic force

Answer: F = 48.56 kN

Hydrostatic force on a plane surface: F = ρ·g·yc·A. It acts at the centre of pressure, ycp = yc + Ic/(ycA), which always lies below the centroid.

Centroid depth and area

yc = d + H/2 = 0.5 + 1.5/2 = 1.25 m
A = H·b = 1.5·3 = 4.5 m²
gated = 0.5 mH = 1.5 mF

Resultant force

F = ρ·g·yc·A = 880·9.81·1.25·4.5 = 48.56 kN

Answer

F = 48.56 kN
13.Continuity & Bernoulli

Answer: p2 = 330 kPa

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Continuity and Bernoulli

Work in Pa, then divide by 1000 to get kPa.

v2 = v1·(d1/d2)² = 0.5·(75/25)² = 4.5 m/s
½ρ(v1² − v2²) = ½·1000·(0.5² − 4.5²)/1000 = −10 kPa
p2 = p1 + ½ρ(v1² − v2²) = 340 + (−10) = 330 kPa

Answer

p2 = 330 kPa
14.Continuity & Bernoulli

Answer: H = 4.128 m

Continuity and Bernoulli: for an incompressible fluid the flow rate is the same at every section, Q = A₁v₁ = A₂v₂. Along a streamline without losses, p + ½ρv² + ρgz is constant, so where the fluid is faster or higher its pressure is lower.

Exit velocity

β = 25/75 = 0.3333
v2 = √(2p1/(ρ(1 − β⁴))) = √(2·40000/(1000·0.9877)) = 9 m/s

Height of the jet

Bernoulli along the jet: at the top the velocity is zero and the pressure is atmospheric again.

H = v2²/(2g) = 9²/(2·9.81) = 4.128 m

Answer

H = 4.128 m
15.Ideal gas law

Answer: V = 988 L

Ideal gas law: PV = nRT, with n = m/M.

Moles

n = 420/4.003 = 104.9 mol
T = 10 + 273.15 = 283.1 K

Volume

V = nRT/P = 104.9·8.314·283.1/250 = 988 L

Answer

V = 988 L
16.Ideal gas law

Answer: V2 = 26.32 L

Combined gas law: for a fixed amount of ideal gas, P1V1/T1 = P2V2/T2.

Absolute temperatures

T1 = 298.1 K, T2 = 523.1 K

Combined gas law

V2 = V1·(P1/P2)·(T2/T1) = 20·(300/400)·(523.1/298.1) = 26.32 L

Answer

V2 = 26.32 L
17.Heat engines & refrigerators

Answer: ηmax = 53.48 %

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 400 + 273.15 = 673.1 K
TL = 40 + 273.15 = 313.1 K

Carnot efficiency

ηmax = 1 − TL/TH = 1 − 313.1/673.1 = 53.48 %

Answer

ηmax = 53.48 %
18.Heat engines & refrigerators

Answer: Ẇmin = 0.7675 kW

Second-law limits: no cycle working between reservoirs at absolute temperatures TH and TL can beat the reversible (Carnot) cycle: ηmax = 1 − TL/TH, COPR,max = TL/(TH − TL) and COPHP,max = TH/(TH − TL). Energy is always conserved: QH = W + QL.

Absolute temperatures

TH = 20 + 273.15 = 293.1 K
TL = 5 + 273.15 = 278.1 K

Best possible COP

COPHP,max = TH/(TH − TL) = 293.1/(293.1 − 278.1) = 19.54

Minimum power

The least work is needed by a reversible machine, which has the highest COP.

Ẇmin = Q̇H/COP = 15/19.54 = 0.7675 kW

Answer

Ẇmin = 0.7675 kW
19.Waves, sound & optics

Answer: β = 112 dB

Waves: a periodic wave moves one wavelength in one period, so v = fλ with T = 1/f. On a stretched string v = √(T/μ), with T the tension and μ = m/L the mass per metre. Sound in air travels at about 343 m/s at 20 °C, light in vacuum at c = 3.00 × 10⁸ m/s. Loudness is measured on a logarithmic scale: β = 10·log₁₀(I/I₀) dB with I₀ = 10⁻¹² W/m², so 10 times the intensity adds 10 dB. A point source spreads its power P over a sphere: I = P/(4πr²).

Intensity

I = P/(4πr²) = 0.1592 W/m²

Level

β = 10·log₁₀(0.1592/10⁻¹²) = 112 dB

Answer

β = 112 dB
20.Waves, sound & optics

Answer: mmax = 1

Interference and diffraction: light from two slits a distance d apart reaches a point on the screen with a path difference d·sin θ. Bright fringes appear where d·sin θ = mλ (m = 0, ±1, ±2, …). For a screen at distance L ≫ d, the m-th bright fringe is at y = mλL/d and the fringe spacing is Δy = λL/d. A grating with N lines per millimetre has d = 1/N and sharp maxima at d·sin θ = mλ; since sin θ ≤ 1, the highest order is the largest whole number m ≤ d/λ. A single slit of width a has dark fringes at a·sin θ = mλ, m = ±1, ±2, …

Line spacing

d = 1/1200 mm = 0.8333 µm

Highest order

m ≤ d/λ = 0.8333 µm/0.5 µm = 1.667 → mmax = 1

Answer

mmax = 1

ExamProblems · examproblems.com/courses/physics-for-engineers